Need Help?
Call
Fix F13, F30 error codes or a non-responsive oven display with this electronic control board. Manages temperature and timer functions. Moderate DIY install.
I bought the clock/timer from Appliance Parts Pros.com and technician install it. Honestly if I had to do it I could have. it is was very easy to install. Read more
Fix a dim or blank oven display and unresponsive buttons with a new clock timer control board. Straightforward repair for failed digital displays.
Replaced the clock/timer module (for the third time in this oven). Read more
This electronic oven control board governs your range's heating functions and displays the time and timer. Replacing a failed board restores reliable bake/broil operation, accurate temperature control, and a responsive clock/timer interface. What it does:
Stumbled upon Appliance Parts Pros web site and after some research bought 2 circuit boards. (UIB) Interface Board AP4501702 and ESEC Relay Board AP5780950. I carefully replaced the UIB board first and it solved the problem. Things like taking the door off can be found on the internet and took me far more time than actually replacing the board. I have never used APP before but understand that the other board is returnable. I am a very happy and future customer. Read more
Fix an oven that won't heat, shows error codes, or has an unresponsive display. This control board regulates heating elements and oven functions.
Ordered a new electronic control board and temperature sensor. Had to take the oven out of its cabinet to gain access. Once I struggled through that, the rest of the repair was quite simple. Installed both new pieces, and the oven works like a charm once again ! And your shipping was FAST ! Showed up in two days. Thanks a lot ! Read more
Fix an oven that shuts off during cooking or won't maintain temperature. This range control board monitors heat and sends power to the oven elements.
The replacement part was: CONTROL OVEN ERC3HP Part Number:WB27K10378 It looks like this superseded the original part, so maybe the mfg knew about this issue? I could not find disassembly instructions so just went straight into it. Here's the steps from memory: 1) Shut off breaker for stove and confirm that panel lights go off 2) Pull range away from wall about 12" 3) Shut off gas feed to stove 4) From the back of the range, remove the two hex washer head screw holding the in place 5)... Read more
Fix an oven with error codes, non-responsive buttons, or incorrect temperatures. This control board manages all functions including timers and settings.
Fixes oven that won't start, won't heat, or shows error codes. This control board manages temperature cycles and display functions. Moderate DIY repair.
Ordered igniter, it came in two days . Pulled out oven . Unplugged. Disassembled old one, installed new one. Plugged back in all good Thanks Read more
Dishwasher won't start or buttons unresponsive? This main control and tactile board kit restores cycle selection and operation. Moderate DIY repair.
I've ordered new main and tactile board and installed it. Everything worked fine after boards exchange. Ran full cycle, no problems at all. Dis-assembly and installation was really easy, all I needed was Phillips screwdriver and a star tip attachment wrench (I'm always asking myself question why this is done like that? , why can't it be just regular Phillips screw?) Read more
Fix a dryer that won't start, won't advance cycles, or has a smoking timer. This control timer restores proper cycle operation. DIY repair in 1 hour.
Replaced the heater unit because the heater coil had burned in two. The whole project took less that one hour. I also replaced the dryer timer since one of the cycles would not cool down as part of the process. Read more
This electronic PC board is the appliance's main control, processing inputs and directing power to components so cycles run correctly. Replacing a failed board can restore normal operation when the unit is dead, won't start, or stops mid-cycle.
Ordered an new Control board here. Killed gas and power supply. Pulled oven. Opened rear bottom panel. Labeled all wires to control board with “new” locations using electrical tape. Included instructions were great! Pulled all cables. Removed old and reinstalled new control board. Attached all wires to new locations. Tested... Success! Better than ever. Board replacement time - 3 hours total. Time to clean oven back to new... 3 days. Saved us $2k for a service repair or $7k to replace the unit.... Read more
Washer won't start, shows error codes, or cycles incorrectly? The control board manages all wash cycles and safety functions. Moderate DIY repair.
After taking the top off the washer I found the Tech Data Sheet ( for repair person ) The E53 code was listed as Low Voltage to the motor board and referred me to test #15. Which stated to check the "drum water NTC" ( Negative Temperature Coefficient or Thermistor). What was misleading was that there are 2 NTC's. If your washer has a "Sanitize" feature , then there is a drum water NTC as well as one on the fill valve body. IF you have the sanitize feature then you need to replace the drum water... Read more
Fix display issues, unresponsive controls, or oven overheating with this electronic control board. Manages bake/broil functions and timing display.
Unplugged oven and removed back panel of oven, found schematics taped to back of oven. Found a relay board that was burned where upper heating element plug connected to it. Replaced relay board and then repaired burned connector by replacing the spade terminal ends that were melted. Suspect connection was loose and that caused board damage. The other board i replaced because some display segments had stopped working with oven temperature. Was difficult to see what temp the oven was. This was a... Read more
This oven control board manages the range's bake and broil functions, temperature regulation, and the display/timer. Replacing a failed board restores accurate heating and responsive controls so the oven starts, runs, and shuts off as expected.
I replaced the interface board that connected stove top to the elements. I was a little worried because some online message boards reported the same problem and the problem did not clear when they replaced the board. I ordered the board on Thursday afternoon and it was delivered to my home Saturday afternoon. I installed the new board Saturday night and oven is working like new. I thank you for your excellent service. Read more
Fix F10 or F11 error codes with this range electronic oven control board. Restores accurate temperature control and timer functions. Moderate DIY repair.
I replaced the clock/timer with a new one I ordered from you and it solved my problem. I saved over 1000.00 dollars versus a new stove. Thank You. Read more
If your dishwasher won't start, cycles won't advance, or buttons don't respond, the control board may have failed. This board regulates all functions.
Restore reliable timekeeping and timed-cycle control with this Clock/Timer Kit. It replaces a failed clock/timer so you can set the time, run countdowns, and receive alerts as designed by the manufacturer. What it does
Replaced the complete control panel. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.