Bath Fan Light Switch Parts
Genuine Ge part
By: Ge
Part Number: WB27T10626
Replace your range pilot indicator light when it stays on, flickers, or won't illuminate. Signals when cooktop elements are hot for safety. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Light went out for child lock on ge cooktop James B. • Fredonia , NY • October 11, 2014
Took top apart to find out that the problem was just the lens for the light was broken. Come to find out that the lens is what holds the light in place. When the lens broke the light fell down into the base of the cooktop. I bought a light and lens but for the price I could not go wrong. I cannot believe how fast and easy my order was handled!! Awesome company
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP10513803
Refrigerator not cooling or freezer warm? A failed evaporator fan motor stops cold air circulation. DIY repair in under 30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Refrigerator would not cool anymore 15 year old amana 25 5cf Michael L. • Provo , UT • February 27, 2015
Used Google to troubleshoot the issue. Inside the freezer I took the back off. Noticed two things. The evaporator motor was not turning and the top half of the coils were frozen over. Obvious fan not spinning issue. I felt the motor and it was hot. Spun the fan it it started spinning. Put it all back together. Ran OK for 5-6 more days then same issue. I ordered the new motor and then and spun the fan again. It lasted for 2 days. Had to spin the fan to get it going 2 more times until...
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: 202937
If your washer overfills, underfills, or won't advance cycles, the water level pressure switch may have failed. Takes about 10-15 minutes to replace.
Do-It-Yourself Stories from Customers like You
Broken pressure switch Carole Y. • Yakima , WA • November 06, 2019
Bought part from you and got a repairman to put it in. Darlene of your staff found part I needed. Nice lady! Repairman charged $82 to do a 10 minute job. Not your fault!
Read more
More
Genuine Lg part
By: Lg
Part Number: 6912A40002J
Halogen bulb that illuminates the cavity or cooktop below your microwave. Replace when dim, flickering, or burned out. Confirm fit with model number.
Do-It-Yourself Stories from Customers like You
Needed new light Christine M. • Blountville , TN • December 12, 2015
It wasn't easy because this microwave over-the-stove light was difficult to find at a reasonable price. However, I did find one at AppliancePartsPros.com. Since the price was so reasonable, I bought 4 bulbs plus an interior light bulb and paid the same shipping price for all. Everything works great.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316219004
Fix burners that won't spark or click constantly. This igniter switch wiring harness restores reliable lighting on gas ranges. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
One of my stove burners would not spark. Mike M. • Bound Brook , NJ • October 26, 2023
I replaced the switch/wire harness that connects to the gas valves.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3405281
Dryer won't stay running after releasing start button? A faulty power relay is often the cause. This relay keeps the motor spinning consistently.
Do-It-Yourself Stories from Customers like You
Dryer motor would not stay in operation after releasing start button Gary P. • Wilton , NY • October 13, 2014
Googled the issue and was told to replace the motor relay. I ordered new relay form App. Parts Pros and it arrived in less than 2 days. After some relatively simple dis assembly of the dryer I replaced the relay. Dryer works fine now.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10249845
This water level pressure switch senses tub water level and signals the control to stop filling and advance the cycle. Replacing a failed switch restores proper fill shut-off and allows the washer to move to wash, drain, and spin.
- Detects water level via air pressure in the attached hose from the tub air dome
- Signals the timer/control to close inlet valves at the selected fill level
- Enables agitation and spin only when the level is appropriate or the tub is empty
- Typical symptoms of a failed switch include overfilling or underfilling, continuous filling, cycle not advancing, or no spin
What's included: 1 water level pressure switch Install notes:
- Disconnect power and turn off water supply before servicing
- Access the switch in the control console or top panel; note wire locations for reassembly
- Transfer the pressure hose and wire connectors to the new switch one at a time; ensure the hose is clear, not kinked or cracked, and fits snugly
- After installation, run a quick fill test to ensure proper shut-off and cycle progression
Do-It-Yourself Stories from Customers like You
F35 sud f21 Theodorus V. • Renton , WA • September 13, 2014
YouTube, water level sensor, cleaned drain basket
Read more
More
Genuine Ge part
By: Ge
Part Number: WR60X21886
Freezer not cooling or making noise? This evaporator fan motor circulates cold air throughout your refrigerator. Simple plug-and-play repair, 15-20 minutes.
Do-It-Yourself Stories from Customers like You
The freezer (evaporator) fan motor had quite working Richard H. • Palmer , NE • September 27, 2015
Verified power to the motor, then I replaced the faulty motor. I also had to defrost the freezer shutter door.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527841
The Rocker Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for turning the interior oven light on and off. The light switch allows visibility of the oven cavity for viewing food during the cooking process.
Causes can include normal wear and tear over time, exposure to heat inside the oven cavity, or accidental damage.
Symptoms of a bad oven light rocker switch include:
- The oven light failing to illuminate when the door is opened
- The light remaining on even when the door is closed
- An inconsistent or flickering oven light
- The switch itself becoming loose, cracked, or non-responsive
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
1 of the 4 burners would not ignite with its own control Shane W. • Fullerton , CA • November 15, 2022
Removed & replaced igniter switch assembly. The hardest part was figuring out how to remove the range top...look up a YouTube video with your manufacturer and model number to see how to do it.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5309918806
This door-activated light switch controls the interior lamp in your refrigerator. Replace a worn or sticking switch to restore dependable lighting and prevent the bulb from staying on and warming the compartment when the door is closed.
- Opens and closes the light circuit as the door is opened and closed
- Helps prevent the light from staying on with the door shut
- Common symptoms: interior light won't turn on, stays on with the door closed, or works intermittently
- Physical signs may include a stuck/broken plunger or damaged housing
What's included: One light switch Install notes:
- Disconnect power before servicing
- Gently pry the old switch from the liner/panel and release its locking tabs
- Transfer wires one at a time to the same terminals on the new switch
- Press the new switch fully into place; restore power, and test
Do-It-Yourself Stories from Customers like You
Light didnt turn on Robert R. • New Britain , CT • May 25, 2015
Well started with the bulb switch when that didn't work, i continue with the next switch which was the door switch, then it worked just make sure the light bulbs are good, because i went thru 4 bulbs
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DA34-00043B
The Refrigerator Door Switch is an essential component designed to maintain the optimal performance of your Samsung refrigerator. This genuine OEM part features a reliable switch reed mechanism that accurately detects when the refrigerator door is opened or closed. By ensuring the door is properly sealed, it helps regulate the internal temperature, keeping your food fresh and your appliance running efficiently. The Refrigerator Door Switch is compatible with a wide range of Samsung refrigerator models, making it a versatile choice for your repair needs. Installing this switch is straightforward, allowing you to quickly restore your refrigerator's functionality without hassle. Whether your current switch is malfunctioning, causing the door light to stay on, or affecting the cooling performance, the Refrigerator Door Switch provides a dependable solution. Trust in this genuine OEM part to deliver consistent performance and extend the lifespan of your refrigerator, ensuring a reliable and efficient kitchen appliance for years to come.
Do-It-Yourself Stories from Customers like You
I lost a piece of my refrigerator while transporting it (on the highway) Mark C. • Candler , NC • October 13, 2014
I called ApplianceParts Pros and 'chatted' with Robin, described the cover and reed sensor and she found the parts for me. The parts were promptly shipped and arrived when promised. The parts were what I needed and twenty minutes later the refrigerator was fully operational! Thanks ApplianceParts Pro for a great shopping experience.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11683244
LED light module illuminates fresh food and freezer compartments. Replace when lights are dim, flickering, or not turning on. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Some lights out some lights dim John D. • Odessa , FL • October 06, 2024
Replaced lights.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002797
Dryer making loud noise or won't dry? A cracked or loose blower wheel often causes poor airflow. Moderate DIY repair, 1-2 hours with basic tools.
Do-It-Yourself Stories from Customers like You
Dryer was making a loud noise in use Brian L. • Sacramento , CA • November 21, 2019
I disassembled my dryer and found that the fan(blower wheel) was "free-spinning" on the motor shaft. A common problem with this model Maytag dryer. I also discovered that the right drum roller (drum support roller) was in the process of failing. Note: the fan drive was frozen on the motor shaft, this was the threaded type of motor and fan assembly. I was able to remove the fan drive by using vice-grip pliers, hammer and a combination wrench to hold motor from turning. Also Note: the fan...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74003122
Fix a burner stuck on high or won't adjust temperature with this infinite switch. Controls cooktop burner heat levels. DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Element would stay on high even at lower settings why it would fail in the "high" mode is not a good design David M. • Suffield , CT • February 04, 2015
Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element
Read more
More
Genuine Ge part
By: Ge
Part Number: WB08T10045
Restores bright interior lighting in your oven or range. Replace when bulb burns out to clearly see food and monitor cooking progress. Verify G9 base fit.
Do-It-Yourself Stories from Customers like You
Light was out in my oven Molly S. • Hopewell , VA • October 15, 2016
I searched and searched for a bulb with no luck. I peered into the darkness wondering if my food d was done? Would my pot run over? Then I found your site and met the goal of finding light again. I bought the bulb and shoved it in and all my needs we met.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24T10134
Burner won't turn off or stays on high? This infinite switch controls power to your surface element. Moderate DIY repair restores heat control.
Do-It-Yourself Stories from Customers like You
One burner stopped working due to short circuited control the seal over time started to allow the liquids to go down the control shaft causing the short Igor K. • Fair Lawn , NJ • April 26, 2016
Disconnected ( already tripped) breaker in the panel. Lifted cooked top unscrewed the glass top and set aside. I took the picture of the wires connected to the control on my ipad and replaced broken control. reconnected the wires as per picture. Cleaned the greased glass top and replaced the infinite switch seal for the broken control. Then reinstall glass top back on the cooktop and put the cooktop back in in place. Enable breaker in the panel and now i have good working cooktop again. ( do...
Read more
More