Drum Support Roller Parts
Genuine Samsung part
By: Samsung
Part Number: DC66-00470A
Replaces worn or leaking shock absorbers that cause excessive vibration and wobbling during spin cycles. Restores stability and smooth operation.
Do-It-Yourself Stories from Customers like You
Washer banging and bouncing E M. • Debary , FL • February 24, 2018
My washing machine was making a loud thumping sound and bouncing around a bit. Research suggested that it could be bearings and/or the spider shaft assembly. After watching the instruction videos to replace the spider or bearings, I seen you need to replace both the shaft seal and tub gasket to get to the spider and bearings. So I ordered both and waited for them to arrive. Plan was to disassemble the washer, determine what was needed, order the additional parts needed, and reassemble after the...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4036ER4001B
The Washer Gasket is an OEM replacement part for LG washing machines. It is a flexible seal that lines the opening of the washer tub, creating an airtight barrier to prevent water leaks and ensure proper containment during the wash and spin cycles.
Symptoms of a bad washer gasket include:
- Water leaking from the front of the washing machine
- Excessive moisture or condensation buildup around the gasket area
- Difficulty in properly closing and latching the washer door due to a worn or damaged gasket
Causes of a washer gasket failure can range from general wear and tear over time, to physical damage from being pinched or cracked, to improper installation or alignment issues.
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285744
Replacement tub suspension pads for washing machines. Install under the tub to cushion and stabilize during spin cycles. Replace if cracked or missing.
Do-It-Yourself Stories from Customers like You
It was dancing around the floor when it went into the spin cycle Harry W. • Landisburg , PA • January 19, 2020
First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD35X21038
Replacement roller and axle kit for dishwasher lower racks. Includes 8 wheels and 8 axles. Replace when rollers are broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Dishwasher lower rack wheels were melted/broken and the rack wouldn't roll the washer would make a loud clunking noise while aggitating one of the rubber top tub restraints were broken Joseph Z. • Louisville , KY • September 23, 2016
I never respond to these kinds of requests but I must respond to this one because of your superior service!
The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too.
The dishwasher wheels replacement didn't require tools & took less than 15 minutes.
The original design/materials are not very...
Read more
More
Genuine Lg part
By: Lg
Part Number: 383EER3001J
Shock absorber kit reduces vibrations and stabilizes the drum during wash cycles. Replace if worn, leaking, or causing excessive movement and noise.
Do-It-Yourself Stories from Customers like You
Lg washer: roaring bearings pump noises not draining properly and clogged hoses Albert W. • Germantown , MD • October 07, 2018
Our 10-year-old LG WM2487HWMA front load washer had gradually developed multiple problems. It sounded like a jet engine during high speed spin, both the drain pump and circulation pumps were noisy, it would not drain properly (water was coming in during spin cycle), no water was spraying out at the top of the door into the drum like it is supposed to when the circulation pump was running. It's amazing we had still been able to wash clothes at all! With the help of the excellent...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00611475
Replacement wheel for dishwasher lower rack. Snaps into place to restore smooth rolling when wheels are broken, cracked, missing, or worn out.
Do-It-Yourself Stories from Customers like You
Wheel on bottom rack was missing Steve H. • Ogden , UT • July 02, 2018
Popped on the new one, very easy
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP37001042
This roller supports and stabilizes the dryer drum as it rotates. Replace if worn, cracked, or causing noise during operation. Installs behind the drum.
Do-It-Yourself Stories from Customers like You
Beating and bumping like a pair of tennis shoes were inside William R. • Simpsonville , SC • March 28, 2017
I pulled the dryer away from the wall and unplugged it. Then I used a 5/16 nut driver and removed the 2 screws in the bottom front panel and pulled it off. Next I removed the 2 5/16 screws holding the front door panel and pulled it down far enough to disconnect the wires for the light and the wires on the door switch. Then , using a putty knife I popped the springs holding the top and control panel then pulling the top up and resting it against the wall. Now I started my repair by laying on...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11130359
This kit includes suspension rods and cups that support the washer's inner tub, absorbing vibration and movement during the spin cycle. The rods connect between the outer tub and the base frame to keep the tub properly balanced. Replace this kit if your washer shakes excessively, bangs loudly during spin cycles, or walks across the floor - worn or broken suspension rods are a common cause.
Do-It-Yourself Stories from Customers like You
Making noise and moving when in spin cycle. Dale A. • New York , NY • April 26, 2022
Replace suspension rods.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC97-16350U
Stop shake, thumping, and out-of-balance pauses with this suspension damper rod for select top-load washers. It supports the tub and absorbs vibration during wash and spin for smoother, quieter cycles.
What it does
- Supports the tub and dampens vibration during spin
- Helps reduce shaking, banging, and balance interruptions
- Restores stable operation after a broken or weakened rod
What’s included
Pro tip
Install notes
Do-It-Yourself Stories from Customers like You
Washer kept going out of balance causing the whole cycle to restart Richard B. • Horton , AL • August 28, 2025
Replaced all 4 suspension dampers.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002213
The Thrust Bearing Kit is an OEM part for Whirlpool washing machines. This kit is essential for the proper operation of the washer's transmission system, allowing the drive system to engage smoothly and efficiently.
Over time, components within the thrust bearing kit can wear down or become damaged due to the constant stress and movement they endure during the wash cycle. This wear can lead to issues with the washing machine's ability to agitate or spin correctly.
Symptoms of a bad Thrust Bearing Kit include:
- The washing machine is noisy during operation
- The washer struggles to agitate or spin
- The washing machine may fail to spin at all, leaving clothes wet at the end of the cycle
- Excessive vibration during use
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Spins slowly
-
Pumps but will not spin
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Washer squeaked when tub is stopped during spin cycle Daniel K. • Grafton , WI • July 22, 2018
My Maytag washer make a loud screech when the washer tub needed to be stopped by the brake. Last year, I had replaced the suspension springs, the snubber ring, the drive belt and the drain pump. Those repairs worked fine, but a few weeks later, the screeching noise started. So I figured it was the brake system. I thought it would be better to replace the brake rotor and stator together as a set since I was going to disassemble both and they were 18 years old anyway. I decided to replace the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-3037050
Idler pulley wheel installs near the motor to guide and tension the drum belt. Replace if cracked, worn, or bearing has failed after years of use.
Do-It-Yourself Stories from Customers like You
Very concerning loud thumping noise while running our dryer. William M. • Sudbury , MA • July 20, 2019
In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future.
I was wrong.
I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity.
I found out...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11217817
Four-rod suspension kit that supports the washer tub and absorbs vibrations. Replace when rods are bent, broken, or when the tub sags or moves excessively.
Do-It-Yourself Stories from Customers like You
Banging and stopping out of balance Gary T. • Creal Springs , IL • February 22, 2024
Replaced suspension rods.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195623
Upper dishrack track for dishwashers. Guides the top rack for smooth sliding. Replace if cracked, warped, or causing rack to fall when pulled out.
Do-It-Yourself Stories from Customers like You
Top rack of dishwasher was falling down when pulled out Joanne P. • Andover , MA • October 13, 2014
Replaced wheel assembly because prongs were broken and replaced track because wheel assemblies were rolling out from the track when extended.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X26146
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
- Difficulty in sliding the lower rack in or out
- Excessive noise or grinding during rack movement
- The rack becoming stuck or not rolling smoothly
- Visible wear, cracks, or damage to the roller itself
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
A wheel housing attached to the bottom of the dishwasher dish rack had come off and melted in a wash cycle Jessica B. • Dayton , NV • November 03, 2024
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359270
Left-side shaft that supports the drum roller assembly in your dryer. Replace if worn, bent, or damaged to restore proper drum rotation and alignment.
Do-It-Yourself Stories from Customers like You
Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021
Use the videos on this website here and you can repair most brands. Many are duplicate in design.
1. Unplug the machine.
2. Move it away from a confined area to get more room.
3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet.
4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937183
Seals the gap between drum and front panel to prevent air leakage and clothes snagging. Replace if worn, torn, or causing thumping noise. Verify fit.
Do-It-Yourself Stories from Customers like You
Constant beeping no heat Amy N. • Pike Road , AL • March 27, 2018
My 12 year old Frigidaire stack on top dryer had been beeping distress messages in some unintelligible code for about a year when it completely stopped producing heat. It also had a long standing issue with delicate fabrics and thin straps or drawstrings getting caught in the drum. After using this site to troubleshoot and viewing the useful how-to videos, I ordered and replaced the heating element, thermal limiter, and felt seals. Based on others' stories, I decided to also replace the rear...
Read more
More