Facia Parts

This control panel replaces the front console that houses the buttons and indicator lights on your dishwasher. It restores a clean look and responsive inputs so you can select options and start cycles reliably again.

• Provides the user interface for cycle selection, Start/Cancel, and options
• Sends keypad inputs to the main control board for proper operation
• Displays status/option indicators where applicable
• Replaces cracked, faded, or unresponsive consoles to improve usability

• Disconnect power to the dishwasher before servicing
• Open the door and remove inner-door screws to release the console from the door
• Support the wiring; transfer any clips/trim and reuse existing hardware as required
• Avoid pinching the ribbon cable and verify button function before final reassembly

This is the front control panel for the appliance's console. It houses the user interface and protects the electronic controls, restoring a clean look and proper button/selector operation when the original panel is damaged or worn.

• Provides the surface and mounting for the console's buttons and indicators
• Replaces panels that are cracked, discolored, loose, or unresponsive at the buttons
• Can help resolve issues like sticking keys or difficulty selecting cycles
• Cosmetic and functional refresh for a worn or broken console face

• Disconnect power to the appliance before servicing
• Open the door or access area to remove mounting screws from the existing panel
• Carefully transfer and reconnect any control board, keypad ribbon, or harnesses in the same orientation
• Test all functions before fully reassembling

This genuine OEM part is a touchpad control panel assembly for dishwashers. The touchpad control panel assembly is the plastic piece that houses the selection buttons of the dishwasher that control the desired setting of the washer. If the touchpad control panel assembly is no longer responsive to touch, it will need to be replaced.To replace this part, start by turning off the power to the appliance. Then take a screwdriver or putty knife to release the control panel from its locking tabs. Pull up gently to pry the control panel out of its place. Once removed set it to the side, and remove the wire harness and any individual wires that are attached to the control panel. Once removed, place the wires into the new unit in their correct terminals. Snap the new control panel assembly into its proper position and restore power to the dishwasher. This authentic replacement part is sourced directly from the manufacturer and is sold individually. It is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dishwashers.

This dishwasher keypad is the membrane touchpad mounted behind the control panel. It registers your button presses and sends them to the control, restoring reliable cycle selection and start when the original keys stop responding.

• Receives your button presses for cycles, options, and Start
• Sends those inputs to the dishwasher's electronic control
• Mounts behind the control panel; replaces the membrane touchpad/keypad
• Failure symptoms include unresponsive or intermittent keys, stuck-key beeps/errors, or inability to start a cycle

• Disconnect power at the breaker before servicing
• Open the door and remove inner-door screws to access the control area
• Carefully release and reinsert the ribbon cable; keep it straight and fully seated
• Align the keypad behind the control panel, secure, reassemble, and test functions

This white PC-900 panel insert replaces a worn, cracked or missing trim piece on compatible Whirlpool control panels. It restores a clean finished appearance and provides a stable surface for buttons and mounting clips. What it does:

• Covers and protects openings in the appliance control panel to help keep out dust and debris.
• Provides a flush mounting surface for buttons, switches and retaining clips.
• Restores cosmetic appearance when the original insert is cracked, chipped, discolored or loose.
• Helps maintain proper button alignment and prevents gaps around controls.

• Disconnect power to the appliance before beginning any service.
• Remove the control panel bezel or screws as required to access the insert; gently release retaining clips to avoid damage.
• Align the insert with mounting points and snap or fasten into place; verify buttons move freely.

Replacement keypad assembly that restores the front control interface on compatible GE appliances, giving reliable button response and straightforward entry of settings when the original keypad is worn, damaged, or unresponsive. What it does:

• Provides the user interface for selecting cycles, temperatures and timer settings by transmitting button presses to the appliance control.
• Replaces worn, cracked, or non-responsive buttons and membrane surfaces that no longer register inputs.
• Can resolve symptoms like unresponsive or intermittent buttons, erratic control behavior, or failure to accept commands from the front panel.
• Works with the appliance's electronic control to return normal keypad operation when the control board itself is functioning.

• Always disconnect power to the appliance (unplug or switch off circuit breaker) before starting any repair.
• Handle the keypad and any attached ribbon cable carefully to avoid damaging contacts; avoid touching circuit traces.
• Follow the appliance service manual for removal/replacement steps and torque values for fasteners.

Escutcheon restores the finished look of your appliance while protecting control switches and openings from grease, spills and debris. Use it to replace cracked, damaged or missing trim. What it does:

• Covers and protects control components and switch openings from moisture, food and debris.
• Restores the appliance's cosmetic appearance and helps secure knobs and switches.
• Common repair for cracked, warped or missing trim that leaves controls exposed.
• Reduces rattling or loose-feeling control panels by providing a snug trim fit.

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the trim carefully to avoid scratching the finish; use proper screwdrivers and a trim tool as needed.

This is a control panel.

Color: Black includes touchpad.

Color: Black

Color: Universal Silver

Color: Black

This user interface mounts in the dishwasher door and contains the keypad you press to choose cycles and options. Replacing a failing UI restores responsive controls and reliable communication with the main control so the cycle can start and run.

• Interprets button presses and sends signals to the electronic control to run the selected cycle
• Common symptoms: unresponsive or intermittent buttons, won't start, erratic lights/beeping, or only certain options work
• Issues may stem from moisture intrusion, a worn keypad, or a damaged ribbon connection

• Disconnect power at the breaker before servicing
• Open the door and remove inner-door/console screws to access the UI; support the panel to avoid strain
• Handle the ribbon cable carefully and observe ESD precautions; transfer any clips/insulators from the old part as needed
• Reassemble and test keypad functions before final tightening

This control panel is the front console where you select wash cycles and options on the dishwasher. It restores a clean, intact interface and reliable input when the original console is damaged or worn. What it does:

• Houses the dishwasher's user interface area for cycle and option selection
• Transmits user inputs to the electronic control to start and customize cycles
• Replaces cracked, warped, or cosmetically damaged consoles
• Helps with unresponsive or intermittent buttons, stuck keys, or inability to start a cycle when due to a failed console/touchpad

• 1 control panel assembly

• Disconnect power at the breaker before servicing.
• Open the door and remove inner door screws to release the console from the door assembly.
• Support the wiring; disconnect the connector(s) and transfer any reusable trims or hardware from the old panel.
• Install the new panel, reconnect, reinstall screws, restore power, and test all functions.

The Control Panel is an OEM part for Frigidaire dishwashers. Located at the front of the dishwasher door, the control panel features buttons and displays that allow for the selection and monitoring of wash cycles. Printed electronic circuits distribute input signals to initiate the appropriate cycle settings.

Causes of a bad Control Panel can include cracked or damaged screens, non-responsive buttons, or failures of internal electronic pathways over time. 

Symptoms of a bad Control Panel include:

• Faulty or unreadable display screens  
• Random cycle activation without input
• Repeated error codes or flashing lights
• Physical damage or loose components  

This genuine OEM Frigidaire part is compatible with some Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models as well.

This is the factory console assembly for the control area. It replaces a cracked or damaged panel and restores a secure, finished mounting surface so the appliance's knobs and switches stay aligned and operate correctly.

• Houses and supports the timer/controls so they mount securely
• Protects and organizes wiring within the control area
• Restores proper alignment for knobs and switches
• Replaces cracked, warped, or broken consoles that cause loose or misaligned controls

• Disconnect power before servicing; wear cut-resistant gloves when handling sheet-metal parts
• Remove control knobs and any retaining screws; lift off the old console
• Transfer your existing timer/control switches, brackets, and trim to the new console; take photos to document positions
• Reinstall and verify controls move freely and the console is firmly secured before restoring power