Nut Damper Control Refrigator Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10380685
Fix a dishwasher that won't start, stops mid-cycle, or has dim lights with a new electronic control board. Moderate DIY repair, 45-60 minutes.
Do-It-Yourself Stories from Customers like You
Stopped running mid cycle Douglas W. • North Fort Myers , FL • April 04, 2014
Replaced control board. This project took about 45 minutes to complete. It helps if you have two people because at one point you need to squeeze 4 plastic clips. Also helps when switching wire from one board to the other. I am 71 years old and this was a very easy task.
Read more
More
$231.57
- Compare At:
-
$277.88
- You Save:
-
$46.31
Genuine Whirlpool part
By: Whirlpool
Part Number: 1123394
Refrigerator freezing food or not cooling? This temperature control thermostat regulates cooling cycles. Common DIY fix when temps won't stay consistent.
Do-It-Yourself Stories from Customers like You
Running would not stop! stopped would not start! James W. • Norco , CA • May 29, 2017
Ordered a cold thermostat switch and installed it.
Read more
More
$105.36
- Compare At:
-
$125.38
- You Save:
-
$20.02
Genuine Frigidaire part
By: Frigidaire
Part Number: 216979600
Electronic control panel touch pad for upright freezers. Mounts on the front door. Replace if buttons are stuck, unresponsive, or the display is damaged.
Do-It-Yourself Stories from Customers like You
The alarm button was stuck. James B. • Eustis , FL • December 22, 2017
Replaced the control panel all fine.
Read more
More
$239.95
- Compare At:
-
$287.94
- You Save:
-
$47.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 316443919
This is a relay control board that manages the switching of electrical power to heating elements and other high-voltage components in the oven. It receives signals from the main control board and activates or deactivates the appropriate circuits. Replace this board if the oven elements fail to heat, heat intermittently, or if you notice error codes related to relay or heating circuit failures.
More
$365.95
- Compare At:
-
$435.48
- You Save:
-
$69.53
Genuine Frigidaire part
By: Frigidaire
Part Number: 316462807
This OEM replacement part is an oven control board. The oven control board is the primary computer circuit board that controls the main functions of the oven. These functions include turning the oven on as well as adjusting and maintaining the temperature of the oven. Luckily, replacing a control board is a simple process.To replace the board, first, make sure the oven is unplugged. Gain access to the back of the oven and remove the upper back panel. Once the panel is removed, locate the old control board. Take note of the orientation of the wires by taking a photo with a phone camera. Disconnect the wire harness and any individual wires that are attached to the old board. Re-secure the wires into their correct positions. Snap the new board back in place and reinstall the upper back panel.This genuine replacement control board is compatible with Frigidaire Electrolux, Gibson, Kelvinator, and Westinghouse brand ovens.
Do-It-Yourself Stories from Customers like You
Kenmore Model 790 Electric Range. Would not get above 250 degrees. Had been taking increasing amount of time to pre-heat. Joseph N. • Abingdon , MD • April 04, 2014
Ohm'ed out the heat elements and both were good. Outlet had 240 volts. I had reviewed several items on the internet. Everything pointed to the control board. Ordered the part on a Sunday night using standard shipping and received it Tuesday. Replaced and tested. Over is working again.
Read more
More
$341.48
- Compare At:
-
$402.95
- You Save:
-
$61.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 318022001
Fix an oven that won't heat or bake element not working. This relay control board receives signals from the main control board. DIY repair under 1 hour.
Do-It-Yourself Stories from Customers like You
Relay boards on both wall ovens were bad baking element on both ovens would not work Andy S. • Kingsport , TN • September 22, 2014
Andrew helped me trouble shoot the problem. First I replaced the elments but that did not fix the problem. When I spoke with Andrew he told me how to test the OHMS on the new and old element and they were both readying 26 OHMS. I then replaced the control panel for the clock and oven controls. This did not fix the problem. The next step was to replace the relay boards. We placed numbers on the wires (~30) to avoid confusion. Taking notes also helped. Replacing both relay swithces took...
Read more
More
$294.95
- Compare At:
-
$350.99
- You Save:
-
$56.04
Genuine Speed Queen part
By: Speed Queen
Part Number: 38881P
Washer won't advance cycles, keeps filling, or skips rinse/spin? Timer controls cycle sequences. Moderate DIY repair restores proper wash timing.
More
$182.95
- Compare At:
-
$217.71
- You Save:
-
$34.76
Genuine Samsung part
By: Samsung
Part Number: 6001-001377
Mounting screw for refrigerator door hinges and internal components. Replace if stripped, missing, or damaged during hinge repair or door removal.
Do-It-Yourself Stories from Customers like You
Plastic piece broke from bottom of freezer door wouldn't close or stay shut Shawn S. • Tampa , FL • September 05, 2015
Ordered the pieces from here. Downloaded the user manual. I never work on appliances but I couldn't justify the $200 a service tech would have charged to fix a $35 part. Followed the manual and removed the door. Replaced the broken plastic pieces. BE VERY CAREFUL not to strip the screws. I did and that's another story. Very easy to fix. You will need a second person to help guide the door back onto the frame.
Read more
More
$6.41
- Compare At:
-
$7.69
- You Save:
-
$1.28
Genuine Whirlpool part
By: Whirlpool
Part Number: 8186394
Oven not heating, switches to broil instead of bake, or buttons unresponsive? The control board regulates bake functions and temperature settings.
Do-It-Yourself Stories from Customers like You
Oven control board. Ken L. • Blowing Rock , NC • December 15, 2023
Replaced the part.
Read more
More
$231.95
- Compare At:
-
$273.70
- You Save:
-
$41.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006000
Washer won't start, shows error codes, or cycles randomly? The main control board manages all wash functions. Moderate DIY repair with careful handling.
Do-It-Yourself Stories from Customers like You
Frigidaire gltf2940fs2 front load washer e90 error code Wayne A. • Tewksbury , MA • August 01, 2016
After first doing a Google/YouTube search, There was only one "hit" on my search results. Next I went to an appliance message board forum but after almost a week and more than a dozen views, no response was received. This is unusual. I've been on this board before with positive results. They also changed the "rules" for DIYers which could explain why I didn't have a lot of response from the experts.
I attempted to get the unit into diagnostics mode. I was unable to clear the E90 "general...
Read more
More
$232.95
- Compare At:
-
$279.54
- You Save:
-
$46.59
Genuine Lg part
By: Lg
Part Number: 1SZZER4002A
This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.
- Secures panels, brackets, and mounting points as specified by the manufacturer
- Replaces screws that are lost, damaged, corroded, or stripped
- Helps address rattling, vibration, or loose-fitting parts caused by missing hardware
- Maintains proper alignment and stability of the assembly
What's included: One screw
- Disconnect power and, if applicable, shut off gas/water before servicing
- Match the screw to its original location; start threads by hand to avoid cross-threading
- Use the correct driver; tighten snugly without over-torquing into metal or plastic
- Refer to your model's parts diagram to correct location and quantity
Do-It-Yourself Stories from Customers like You
Lg washer/dryer combo unit shook upper counter balance weight loose damaging the mount lugs on the tub cover and tore the tub gasket Christine V. • Saluda , VA • March 28, 2020
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back...
Read more
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07
Genuine Frigidaire part
By: Frigidaire
Part Number: 240442708
Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.
Do-It-Yourself Stories from Customers like You
Lost screws in a move Barbara M. • Anthony , KS • February 24, 2016
Ordered the screws needed from your website and put the doors back on the frig.
Read more
More
$9.23
- Compare At:
-
$9.48
- You Save:
-
$0.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316441804
This is an electronic control board that manages the surface (cooktop) heating elements on an electric range. It includes a potentiometer and display panel that regulate element power levels and show settings. Replace this board if your cooktop burners fail to heat properly, cycle erratically, or if the surface element display is unresponsive or showing error codes.
Do-It-Yourself Stories from Customers like You
Old part cracked off so you could not use it William H. • North Fort Myers , FL • October 31, 2014
Part came in fast and was easy to put on. Turn off elect. and take front panel up , replace part and put back pannel.
Read more
More
$205.44
- Compare At:
-
$244.47
- You Save:
-
$39.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304502779
Refrigerator not cooling or ice maker stopped working? This main power control board manages core functions and power distribution. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
My fresh food compartment on my refrigerator was warm. Steven S. • Frederica , DE • April 17, 2020
After checking, I narrowed the scope to the evaporator fan and the main control board. I replaced the fan and still had the same issue, then I moved to the main board and that resolved my issue. It was a very easy job.
Read more
More
$228.48
- Compare At:
-
$269.61
- You Save:
-
$41.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 67006901
Factory-style replacement screw for securing appliance components. Restores a tight, rattle-free fit for brackets, panels, trims, or covers when the original hardware is missing, stripped, or corroded, helping keep assemblies aligned and secure.
- Fastens components to keep panels, brackets, and trim firmly in place
- Replaces missing, stripped, or rusted hardware that can cause looseness or rattling
- Helps restore proper alignment of parts that won't stay secured
- Useful after service when original fasteners are damaged or lost
What's included: 1 screw Install notes:
- Disconnect power before servicing; shut off water supply if applicable
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten to prevent stripping or cracking adjoining parts
Do-It-Yourself Stories from Customers like You
Refrigerator door handle came off. Penny M. • Pulaski , TN • August 03, 2020
2 parts for both top and bottom of door handle, all ordered. Easy to reinstall handle.
Read more
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: W11126319
This coin chute guides coins from the slide into the coin mechanism so the machine can register payment and begin a cycle. Keeping the chute intact and aligned helps prevent jams and misfeeds in coin-operated laundry equipment.
- Directs coins from the slide to the coin mechanism to register payment
- Helps ensure smooth coin drop, reducing bounce-back and misfeeds
- Common fix when coins jam, fall into the cabinet, or the unit won't start after payment
- Replace if cracked, bent, corroded, or missing
Install notes:
- Disconnect power; shut off gas before service
- Open the coin housing/slide assembly and retain existing hardware
- Install the new chute in the same orientation; align with slide and mechanism, then secure
- Test with sample coins to ensure proper drop and operation before returning to service
Do-It-Yourself Stories from Customers like You
The door latch was bad the control board and coin control board Christopher E. • Lansing , IL • May 18, 2016
A new set of control board, coin control board and the door latch was installed, and the washing machine was reprogrammed.
Read more
More
$178.95
- Compare At:
-
$212.95
- You Save:
-
$34.00