Jet Pump Parts

Replaced the drain pump. Read more

Dishwasher made a humming sound but no water was circulating around. Searching around, I decided that it was either the inlet valve or the pump/impeller. I started with the inlet valve since it’s an easier repair. It didn’t work, no problem, now I have a spare. I then changed the pump and motor assembly. When I got the old one out, the impeller was broken along with a crack in the plastic housing. The repair took about 3 hours following along with the video. The dishwasher now works like... Read more

• Will not drain
• Burning smell
• Noisy

18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and... Read more

Replace the diverter. Read more

Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more

I noticed when we would run washer water would stay in tub. Pump would hum but not pump water out. Layed washer on its belly . Pump was at bottom of washer. Easy access . Removed 3 screws,2 wires , & 2 hose clamps. Didn't have to call Maytag Repair man. Easy Read more

My dishwasher quit cleaning dishes and lost all pressure. The food screen would keep clogging up and I would have to take it out and clean it by hand. After putting a new impeller in, the "gears" on the impeller connected with the screen blades, the old impeller the "gears" were stripped off. And the new impeller comes with new seals, after taking old one out I noticed it wasn't long before my old seals would have started leaking. Very simple repair if you watch the great video that... Read more

• Will not drain

Replace the drain pump after watching a video demonstrating the process. The washing machine had run properly and emptied, so I was surprised how much water remained in the pipe after disconnecting the old pump. Plan on having 2-3 large towels underneath before removing it. The most difficult part (and most irritating) was replacing the intake and outtake hoses with the existing spring clamps. The drain hose into the pump took almost twenty minutes to attach properly. If the hardware store was... Read more

I hated to call a repair Guy, because by the time it takes them to do the service call and then order the part, then schedule another appointment. It would be at least two weeks. I figured I would just buy a new Dishwasher and have it delivered the next day. That was before I saw the price of a new dishwasher. I looked on line and found Appliance Parts Pros, saw the you tube video figured a trained monkey could do this change out on the motor assembly, so why can't I. I ordered the complete... Read more

• Will not drain
• Noisy

Looked up and found the part on Appliance PartsPros.com and fixed the problem for less than $50 and a minimum of trouble. Works great now! Read more

Ordered new Ignitor / Orifice and screws Mike was a great resource, he helped me thru the project. Read more

Replaced the circulation pump Read more

• Won't start

Replaced igniter and orifice assembly, and replaced spark module. Used the video for help, but the video doesn't show the top cover piece that needs to be taken off first. Also the screws for the igniter set were stuck from old grease or something and had to be drilled out. Overall the project was well worth my time for the cost vs replacement decision. AppliancePartsPros.com makes it so easy to choose a part and guesstimate the probably of choosing the right one. Read more

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

So all of a sudden the dishwasher stops working, "0E error"on the panel. Did some google searches and found that it might be the filter, which I did not know needed to be changed, or worse, the motor. Took the filter off per online tutorial (easy) and mopped up all the stagnant water. Poking around, I find the small rubber check valve that has broken. Had to fish it out with tweezers. Long story short, it was not the motor and I doubt it was the filter. It was this $1.87 rubber drainage... Read more

Bought a new drain pump works fine now. Read more