Line Hook Line Mover Regular Spring Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10488048
Washer won't start or shows door lock error? The door strike secures the latch for safe operation. Easy 5-minute fix with just two screws—video available.
Do-It-Yourself Stories from Customers like You
Door would not stay locked. Rickey W. • Mcminnville , TN • July 25, 2017
Removed and replaced the door switch. Best service I just watched their video on it and it was a snap ordering was no problem. Very easy got the switch and plunger when they said with no delays . Very good service I will come back if I need more parts with out hesitation thanks.
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Speed Queen part
By: Speed Queen
Part Number: 205222
If your washer won't start or stops mid-cycle, the lid lock may be faulty. This kit includes the lock assembly and mounting hardware for secure operation.
More
$104.57
- Compare At:
-
$124.44
- You Save:
-
$19.87
Genuine Samsung part
By: Samsung
Part Number: DC66-00326A
Fix a washer door that won't close or lock with this door latch assembly. Typical repair for broken latches takes about 15 minutes. Easy DIY install.
Do-It-Yourself Stories from Customers like You
The door lacth was cracked Keanna D. • Littlerock , CA • September 23, 2014
I removed the wire and rubber seal in order to get to the door lacth then I unscrewed the three screws popped out the latch put the screws and the rubber and wire back and tested the washer. The door now locks and I can wash again...YEPPPPY
Read more
More
$15.36
- Compare At:
-
$18.43
- You Save:
-
$3.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066018
The Detergent Lid Spring is an OEM part for Whirlpool dishwashers. It is responsible for providing the necessary tension to open and close the detergent dispenser lid during the wash cycle.
Over time, the detergent lid spring can wear out, lose tension, or break due to repeated use, exposure to water and detergent, or accidental mishandling. If the spring becomes faulty, the dispenser lid may not function properly, leading to poor washing results.
Symptoms of a bad detergent lid spring include:
- Detergent dispenser lid not opening during the cycle
- Difficulty in closing the dispenser lid
- Inconsistent or incomplete release of detergent
- Visible damage or wear on the spring
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
For the complete detergent dispenser kit order 4387043.
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Frigidaire part
By: Frigidaire
Part Number: 154430501
Balances and supports the dishwasher door for smooth opening and closing. Replace if broken, worn, or causing the door to drop too quickly or hang loose.
Do-It-Yourself Stories from Customers like You
The dishwasher left by tenant with the cover panel loose on the left the door hyperextending a bit when opened. Marlena R. • Star City , IN • July 07, 2021
Took cover completely off and tried putting back, could not match up left screw with available screw hole. Tried many different configurations and sequences to make this happen. watched a video on changing the front panel, the door in it had four screws, mine 2, no help there. Searched on the hyperextending issue, found an article about dogs and kids [had both here] climbing on the door and to check the springs and linkages. Linkages intact both sides, R [opposite] side spring very stretched....
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W10861642
Fix F5 E3 error code or lid won't lock issues with this washer lid latch assembly. Direct replacement part. Most DIYers complete this repair in under 10 minutes.
Do-It-Yourself Stories from Customers like You
E3 F5 Stacy J. • Elk Grove , CA • August 03, 2018
In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again.
Read more
More
$110.42
- Compare At:
-
$131.40
- You Save:
-
$20.98
Genuine Lg part
By: Lg
Part Number: 4970JA3011K
Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.
Do-It-Yourself Stories from Customers like You
Ice forming under ice maker and around the chute Robin A. • San Diego , CA • November 29, 2014
The ice chute flap wasnt closing.
1. I turned off power
2, Pulled off facia around controls on freezer door,, you have to pull out the bottom part of the chute first , its clipped in
3. Disconnected the front panel
4. Unscrewed the next panel to allow access to the chute flap
5. Removed 1 screw holding complete flap and mechanism and replaced with new
6. Re installed all parts in reverse
Problem was the chute flap had worn and was folding over on top edge when opened and then wouldnt return...
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Speed Queen part
By: Speed Queen
Part Number: D510185
The Spring Idler is an OEM replacement part for Speed Queen residential clothes dryers. It works with the dryer drum to facilitate the controlled tumbling of laundry items during the drying cycle. Proper functioning is important for efficiency and effectiveness.
Causes of a bad spring idler can include material fatigue from years of repetitive use. It can also result from overloading the dryer with excessively heavy wet loads that put abnormal stress on the idler mechanism.
Symptoms of a failed spring idler include:
- The dryer drum not rotating smoothly
- Clothing failing to tumble freely and wrinkling instead
- Prolonged drying cycles and increased energy use
- Noisy squeaking or creaking emanating from inside the dryer
As the mechanism responsible for facilitating optimal tumbling, this OEM Speed Queen replacement idler spring restores smooth and efficient dryer operation.
Do-It-Yourself Stories from Customers like You
Clothes rolled into ball and nothing seemed to work Gary A. • Bloomington , MN • April 17, 2017
For about the last month or so the clothes (especially sheets) would just roll into a ball (like a big sausage) the wouldn't dry. Kept readjusting the clothes. I went on the internet to see what the issue could be and found lots of advise about shaking out the sheet and clothes first, using tennis balls, and using fuller or smaller loads. None of that worked. But I finally figured out that the reason they roll into a ball is because the belt around the drum is slipping or stretched. This...
Read more
More
$2.54
- Compare At:
-
$3.02
- You Save:
-
$0.48
Genuine Ge part
By: Ge
Part Number: WE01X29738
The Door Latch is an OEM part for GE dryers. It functions to securely fasten the dryer door shut during drying cycles. The latch fastens the door closed using a tension-based locking mechanism that engages automatically when closing the door.
Causes of a bad door latch can include loose or worn parts from continuous use over time. The locking mechanism may become improperly aligned or miscalibrated, inhibiting the secure closure of the door.
Symptoms of a faulty door latch include:
- Inability to start cycles with the door ajar
- Excessive moisture escaping around the edges of the poorly sealed door during drying
- Loud banging sounds from an improperly closing door
- Door popping open unintentionally mid-cycle
This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Latch on my ge dryer was broken and door would not stay shut Alan K. • Elk River , MN • February 03, 2026
I input the model number and description and found an immediate match from APP. I wasnt 100% sure on how to access the location once I received the part so I watched a couple video's on the site and they confirmed I was going in the right direction.
Read more
More
$17.60
- Compare At:
-
$20.94
- You Save:
-
$3.34
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304530071
Replacement spring and cable assembly for dishwasher doors. Balances door opening and closing. Needed when cable breaks, spring snaps, or door drops.
Do-It-Yourself Stories from Customers like You
Dishwasher door difficult to open/close due to a broken door cable Craig W. • Vernon Hills , IL • December 15, 2019
The door cables attach to springs that help the user open/close the dishwasher door. I attached the new door cables to the springs then attached springs to the intended mounting locations on the door. However, the new cables were shorter than the originals. This created enough tension in the springs to cause the door to close by itself. I was forced to change the springs' mounting locations. Fortunately, I was able to attach the springs to cut-outs in the door that reduced spring tension. ...
Read more
More
$32.24
- Compare At:
-
$38.04
- You Save:
-
$5.80
Genuine Samsung part
By: Samsung
Part Number: DE61-00048A
The Microwave Key Spring is an essential component for maintaining the functionality of your Samsung microwave. This high-quality spring-key ensures that the microwave door operates smoothly and securely, providing reliable performance every time you use your appliance. Crafted as a genuine OEM part, it guarantees compatibility with a wide range of Samsung microwave models, ensuring a perfect fit and seamless integration. Installing the Microwave Key Spring is straightforward, allowing you to restore your microwaveGÇÖs performance without any hassle. By replacing a worn or damaged spring-key with this genuine OEM part, you can enhance the durability and longevity of your microwave. This key spring plays a crucial role in the door mechanism, helping to maintain the proper alignment and ensuring that your microwave closes firmly. Choose the Microwave Key Spring to keep your Samsung microwave functioning efficiently and to enjoy a reliable cooking experience.
Do-It-Yourself Stories from Customers like You
Broken door latch on samsung microwave Don F. • Poulsbo , WA • November 09, 2014
I called Samsung Customer Support and was told I'd need to enter a service ticket since this repair was not something an owner could fix. Then I checked on line and found the parts on AppliancepartsPros.com and read the reviews from other owners about how simple this repair was. I ordered the parts, they were delivered within 2 days. The repair could not have been easier. I used a table knife to remove the plastic inner door, replaced the broken latch, snapped the plastic inner door back in...
Read more
More
$6.53
- Compare At:
-
$7.77
- You Save:
-
$1.24
Genuine Ge part
By: Ge
Part Number: WR02X12256
Spring that controls dispenser arm movement in refrigerators. Installs on the paddle assembly. Replace if broken, detached, or missing to restore arm function.
Do-It-Yourself Stories from Customers like You
The ice dispenser on my GE refrigerator would no longer activate the switch to dispense ice nor water James T. • Ft. Thomas , KY • November 18, 2018
I order both the paddle and spring and watched a video on how to remove the operating panel to replace them
Read more
More
$10.43
- Compare At:
-
$12.52
- You Save:
-
$2.09
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691581
The Door Switch Lever is an OEM part for Whirlpool dryers. It plays a vital role in ensuring the dryer only operates when the door is securely closed by engaging with the door switch to signal the door's status.
Causes of a bad door switch lever can include normal wear and tear from repeated use, physical damage from accidental impact, or deformation from heat and humidity inside the dryer. A faulty lever can prevent the dryer from starting or stopping correctly.
Symptoms of a bad door switch lever include:
- Dryer not starting
- Dryer stopping mid-cycle
- Door not latching properly
- The dryer continuing to run with the door open
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
The lever to the door switch broke. Valerie M. • Rochester , NH • April 02, 2014
First, I rooked on YouTube for a video on how to fix it. The video brought me to a very helpful video with a link to your website. We have had this dryer since we bought the house 10 years ago and the thought of buying something new, that wasn't made as well was a dreaded thought. I went on the website, entered the model number of my dryer and then a search link for a parts search. Not knowing the part number, I was able to find the exact thing I needed. It was amazing and so easy! Had...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10337934
Replacement door spring for dishwashers. Balances and supports the door during opening and closing. Replace if broken, fatigued, or door drops too fast.
Do-It-Yourself Stories from Customers like You
Door spring was week or broke Ronald O. • Saginaw , MI • February 26, 2016
Purchased door springs from Appliance Parts pros.com, installed them and door on our Dishwasher was back to normal, Had to pull out dishwasher from under cupboard to get to springs, as they were on the sides of the dishwasher.
Read more
More
$24.68
- Compare At:
-
$29.62
- You Save:
-
$4.94
Genuine Ge part
By: Ge
Part Number: WE01X34284
Color: Dark Slate
The Door Strike is an OEM part for GE dryers. Positioned on the dryer frame, it securely latches the door closed during cycles. Its magnets align perfectly with the door when shut to create an air-tight barrier, enhancing energy efficiency.
Causes of failure can be normal wear, misalignment stress, or accidental damage. Over time, strikes lose effectiveness at preventing air/moisture exchange.
Symptoms of a bad door strike include:
- Excess warm air entering the dryer chamber
- The door not fully closing or latching tight
- Clothing not drying completely within expected cycles
- Buildup of lint around the door seal area
This GE part is also compatible with some Hotpoint, RCA, and Kenmore models.
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W11188327
Fix a washer that won't start or spin due to lid lock failure. This lid lock assembly prevents opening during cycles. DIY repair in about 45 minutes.
Do-It-Yourself Stories from Customers like You
Shut off. No water. Lid did not lock. Francis H. • Lutts , TN • February 14, 2021
Replaced lid switch
Read more
More
$108.40
- Compare At:
-
$129.00
- You Save:
-
$20.60