Ce Small Engine Flywheel Key Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181651
Fix DL error codes and doors that won't stay shut with this washer door strike. Works with the door lock assembly. Easy 30-minute DIY repair with video.
This part fixes the following symptoms
-
Lid or door will not open
-
Lid or door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Drum spider support broken Debbie E. • Elizabethton , TN • February 14, 2015
New inner drum and front and rear outer drum; although other parts worked, still replaced the bellow and clamp, new door latch, and cleaned the hoses. Washer works great. Just like brand new. Even though matching dryer works, I am going to clean it up and replace some parts on it also.
Read more
More
$18.95
- Compare At:
-
$22.74
- You Save:
-
$3.79
Genuine Bosch part
By: Bosch
Part Number: 00612148
Washer won't start or door won't lock? This door lock assembly secures the door during cycles. DIY-friendly repair, typically takes 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Washer lock broken Arun P. • Burbank , CA • November 14, 2015
Disconnect existing part and connect new one. Disconnect involved removing back cover around lock and electrical connector. Also had to remove rubber gasket.
Read more
More
$105.52
- Compare At:
-
$125.57
- You Save:
-
$20.05
Genuine Whirlpool part
By: Whirlpool
Part Number: 306436
The Dryer Door Latch Kit is an OEM part for Whirlpool dryers. It ensures the dryer door stays securely closed during operation, allowing the dryer to function correctly and safely. This kit typically includes the latch, strike, and necessary mounting hardware for easy installation.
Causes of a bad door latch can include wear and tear from frequent use, accidental damage from forceful closing, or alignment issues due to the door being knocked out of place. A faulty latch can prevent the dryer from starting or cause it to stop mid-cycle if the door doesn't stay closed.
Symptoms of a bad dryer door latch include:
- The dryer door not staying closed
- The dryer not starting or stopping unexpectedly during a cycle
- Difficulty in closing or latching the door
- Loose or misaligned latch components
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Matrag dryer making loud squealing noise that changes constantly! Dwain A. • Mayfield , KY • June 05, 2015
Knowing that several things could be causing the noise, I ordered parts to cover all possibilities; once I got inside the dryer, I found the Idler Arm and Idler Pulley were worn and loose; replaced them and the Tumbler Bearings; the dryer now runs quiet again. Was going to replace the Drive Belt but believe it to be the wrong model, it was narrower and had 4 ribs whereas the old one seems to be OK and I believe has 5 ribs. The Drum Rollers and Shafts were OK Also replaced the Door Latch.
Read more
More
$9.00
- Compare At:
-
$10.19
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11188327
Fix a washer that won't start or spin due to lid lock failure. This lid lock assembly prevents opening during cycles. DIY repair in about 45 minutes.
Do-It-Yourself Stories from Customers like You
Shut off. No water. Lid did not lock. Francis H. • Lutts , TN • February 14, 2021
Replaced lid switch
Read more
More
$108.40
- Compare At:
-
$129.00
- You Save:
-
$20.60
Genuine Speed Queen part
By: Speed Queen
Part Number: D516792
Idler lever assembly with bearing and wheel for dryers. Maintains belt tension for smooth drum rotation. Replace if cracked, worn, or causing squeaking.
Do-It-Yourself Stories from Customers like You
Squeaky idler wheel Jon C. • Tyler , TX • August 09, 2025
Replace idler wheel assembly, belt and spring.
Read more
More
$36.40
- Compare At:
-
$43.32
- You Save:
-
$6.92
Genuine Whirlpool part
By: Whirlpool
Part Number: LA-1003
The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.
Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.
Symptoms of a bad door catch include:
- The dryer door not staying closed
- Difficulty latching the door shut
- The dryer stopping mid-cycle due to the door opening
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't close
-
Shuts off too soon
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Door clip to my dryer broke Richard D. • North Dinwiddie , VA • March 15, 2014
Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done.
Total time was less than 10 minutes. Works like new.
Read more
More
$25.76
- Compare At:
-
$30.40
- You Save:
-
$4.64
Genuine Whirlpool part
By: Whirlpool
Part Number: W11652042
Ice bucket won't stay in place or dispenser not working? This latch assembly secures the bin and aligns it with the auger. Snaps in by hand in minutes.
Do-It-Yourself Stories from Customers like You
The customer complained that the ice maker was not making ice. Julio O. • Macclenny , FL • March 30, 2022
Noticed that the ice level LED was off then removed the ice maker and checked voltage into the ice maker module (L n' V) and didn't get power. Checked continuity on the black wire (fuse) and found it ok. Checked the parts at AppliancePartsPros.com and ordered them.
Came back once got the parts. Installed the new parts then noticed that the ice maker started cycling.
Read more
More
$19.31
- Compare At:
-
$22.79
- You Save:
-
$3.48
Genuine Lg part
By: Lg
Part Number: 4027EL1001A
If your dryer door pops open during cycles or won't stay closed, this door latch assembly restores a secure closure. Easy 5-minute DIY repair.
Do-It-Yourself Stories from Customers like You
My lg dryer latch assembly was broken so i order new one much better thank you Michael W. • Hillsboro , OR • April 19, 2014
I just simply just take 2screws off and remove old latch off and replace new latch on. This is easy not that hard.
Read more
More
$29.48
- Compare At:
-
$35.38
- You Save:
-
$5.90
Genuine Ge part
By: Ge
Part Number: WE01X34284
Color: Dark Slate
The Door Strike is an OEM part for GE dryers. Positioned on the dryer frame, it securely latches the door closed during cycles. Its magnets align perfectly with the door when shut to create an air-tight barrier, enhancing energy efficiency.
Causes of failure can be normal wear, misalignment stress, or accidental damage. Over time, strikes lose effectiveness at preventing air/moisture exchange.
Symptoms of a bad door strike include:
- Excess warm air entering the dryer chamber
- The door not fully closing or latching tight
- Clothing not drying completely within expected cycles
- Buildup of lint around the door seal area
This GE part is also compatible with some Hotpoint, RCA, and Kenmore models.
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Ge part
By: Ge
Part Number: WH10X10008
Washer won't start or door won't lock? This door lock motor and switch assembly fixes both issues. Moderate DIY repair requires removing screws and gasket.
Do-It-Yourself Stories from Customers like You
Wash cycle would not start faint click instead of normal door lock sound Jeff N. • Charlotte , NC • August 16, 2019
Replaced door lock. It required removing the two screws around the lock, pulling the spring hoop wire from around the door gasket, and then disconnecting the two wire terminals from the lock. Reverse with the new part.
After cracking open the old lock the failure was caused by a thin plastic tab breaking off.
I also bought the door switch since it's cheap - just in case the problem was not the lock. But the door lock was the fix.
Read more
More
$167.95
- Compare At:
-
$201.54
- You Save:
-
$33.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684
Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.
This part fixes the following symptoms
-
Will not agitate
-
Will not drain
-
Won't start
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The spin cycle would not initiate pump to drain tub Douglas B. • Skull Valley , AZ • January 21, 2017
Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new.
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Samsung part
By: Samsung
Part Number: DC34-00025E
Washer won't start or shows LO/DC error? Lid lock assembly secures the lid during cycles and signals the control board. DIY-friendly repair with video.
This part fixes the following symptoms
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Dc "spin" and lo "lid lock" error codes Matthew H. • Clarksville , TN • May 19, 2015
After watching the video it was strait forward. Just Pull the screws pop the lid swap the springs "grease them" and put it back together. I would suggest that you have a person help you mostly has a second pair of hands. The lid was over rear springs and it will save you some expletives to have the extra body. I had worn out springs and the load kept becoming unbalanced during spin cycles I just happened to coincide with the Lock mechanism failing. The motor drive for the lock stopped working....
Read more
More
$164.47
- Compare At:
-
$195.72
- You Save:
-
$31.25
Genuine Samsung part
By: Samsung
Part Number: DC64-00519D
Washer won't start or shows door lock error? This door lock switch keeps the door secured during wash cycles. DIY repair in 15-20 minutes with video.
Do-It-Yourself Stories from Customers like You
Part holding door shut broke. Richard B. • Schwenksville , PA • April 04, 2014
First I took off the spring loaded wire ring holding down the seal to the door with needle nose pliers. Pulled back the seal. Removed the 3 screws holding the part on the front of the washing machine. Slid the piece out. Took the protector guard off the off piece and unplug the wires. Put the wires into new part. Put the protector on the new part. Slid the part back into place. Screwed it back in. Put the seal back on. Put the wire spring loaded ring back around the seal. Total time 15 minutes...
Read more
More
$171.95
- Compare At:
-
$204.62
- You Save:
-
$32.67
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102
Dryer door won't stay closed? The door strike secures the door latch during operation. Quick DIY fix—installs from the front in minutes.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer door would not stay closed Carolina L. • Miami , FL • September 08, 2015
My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch.
I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to...
Read more
More
$34.95
- Compare At:
-
$41.24
- You Save:
-
$6.29
Genuine Ge part
By: Ge
Part Number: WE01M10007
If your dryer won't start or the door won't latch securely, the door strike may be worn or broken. This part ensures proper door closure. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Dryer door.issues. James J. • Payson , AZ • November 24, 2023
With the parts in hand and the how-to video supplied by the parts provider. The repair was simple. I am never ordering from anyone else, these folks are the absolute best!
Read more
More
$12.53
- Compare At:
-
$14.79
- You Save:
-
$2.26
Genuine Ge part
By: Ge
Part Number: WH12X10276
Washer won't spin or agitate? A faulty lid switch magnet may be the cause. This part signals the switch that the lid is closed. Easy 20-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Bad lid switch on a ge washer wouldn't agitate or spin David C. • Saline , MI • October 26, 2015
Replaced lid switch and lid magnet. Took just a little longer then 20 minutes as I had to splice in the new lid switch as it wasn't one that was a clip in, it was hard wired in.
Read more
More
$19.31
- Compare At:
-
$22.98
- You Save:
-
$3.67