Med Small Engine Regular Starter Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10702726
Dryer won't start but lights work? A faulty door switch prevents operation. This replacement switch restores normal function in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Broken door switch Jason D. • Troy , IL • March 23, 2019
Ordered replacement, easy swap out. Less than 10 minutes.
Read more
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813660
This door switch detects whether the appliance door is open or closed. A working switch lets the machine start when the door is fully shut and stops operation when the door opens for safety.
- Monitors door position and allows the cycle to run only when closed
- Interrupts power to stop operation when the door opens
- Common symptoms of a failing switch: appliance won't start with the door closed, must press/hold the door to run, interior light stuck on/off, or a "door open" message on models with a display
What's included: 1 door switch Install notes:
- Disconnect power to the appliance before servicing
- Access the switch at the door opening/front panel; release mounting screws or locking tabs and remove the switch
- Move wires to the new switch one at a time to maintain correct positions
- After reassembly, test switch operation before running a cycle
Do-It-Yourself Stories from Customers like You
Open door Carlos R. • Yonkers , NY • January 16, 2018
Replacing door switch.
Read more
More
$16.58
- Compare At:
-
$19.73
- You Save:
-
$3.15
Genuine Whirlpool part
By: Whirlpool
Part Number: W11036551
This is a small electrical switch mounted near the dryer door opening that detects whether the door is open or closed. It completes the circuit that allows the dryer to run when the door is shut. Replace this switch if your dryer won't start, stops mid-cycle, or runs with the door open.
Do-It-Yourself Stories from Customers like You
Problem started with dryer not getting hot and eventually shutting off within 5 minutes of operation. Meynardo G. • Orange Park , FL • March 22, 2022
I used Google and YouTube to search for troubleshooting videos and ordered the parts through AppliancePartsPros.com. I watched the repair videos on parts replacement and found it very helpful. Got it done in about an hour and tested it. It works!!!!!
Read more
More
$48.46
- Compare At:
-
$58.15
- You Save:
-
$9.69
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201769
Refrigerator not cooling or compressor running hot? This start device kit includes relay and overload to restore proper compressor function. DIY install.
Do-It-Yourself Stories from Customers like You
No cooling and no hum from compressor when plugged in Collin H. • Quincy , WA • October 23, 2014
I suspected the start-relay and tested it due to the lint plugged condenser coils. The start-relay rattled when shook, a telling sign it is no good due to over heating. I tested the compressor terminals and compared them the results with the Tech Data Sheet found with the unit, to find my compressor was still good. I checked the start capacitor with a capacitor tester, comparing the results with the rating printed on the side of the capacitor and found it to be good. I cleaned the condenser...
Read more
More
$88.95
- Compare At:
-
$104.96
- You Save:
-
$16.01
Genuine Ge part
By: Ge
Part Number: WE4M407
Fix a dryer that overheats or won't heat properly with a new temperature switch. Controls heat settings across multiple cycles. DIY-friendly repair.
More
$112.45
- Compare At:
-
$132.69
- You Save:
-
$20.24
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491944
This kit includes the electrical components needed to start your refrigerator's compressor motor, including both the start relay and overload protector. These parts work together to provide the initial electrical boost needed to start the compressor and protect it from electrical overload. Replace this kit if your refrigerator isn't cooling, makes clicking noises, or if the compressor won't start.
Do-It-Yourself Stories from Customers like You
Smelled bad all of a sudden Austin K. • Chowchilla , CA • May 10, 2014
The smell was bad. Burnt wires but smelled like it could be a critter. Saw that the starter relay smoked after a cycle. Ordered the part.(sunday). Part recieved on Monday. Installed in less than ten minutes. Wife was happy. Also the website had a video of how to replace the part. Very satisfied??
Read more
More
$114.95
- Compare At:
-
$136.79
- You Save:
-
$21.84
Genuine Ge part
By: Ge
Part Number: WR07X10097
Fix clicking sounds and warm temps with this start relay and overload protector. Controls compressor start-up and prevents overheating. 15-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Would not run led dimmed condenser fan would not run Pete M. • Santa Fe , NM • May 16, 2015
We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from...
Read more
More
$113.95
- Compare At:
-
$135.60
- You Save:
-
$21.65
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491583
This controller kit is the appliance's main electronic control. It reads inputs from the user interface and sensors to power and coordinate key components. Replacing a failed controller restores responsive controls and consistent, reliable operation.
- Interprets commands from the keypad and sensors to manage operation
- Controls relays powering motors, fans, compressor, or valves as designed
- Coordinates modes and cycle timing for proper performance
- Common symptoms: dead or blank display, unresponsive buttons, won't start, intermittent shutdowns, or error codes
What's included: 1 controller kit Installation notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Handle the board with ESD precautions; avoid touching connectors and components
- Photograph/label wire connections and transfer them one at a time to the new board
- After installation, verify any model-specific settings per the service documentation before testing
Do-It-Yourself Stories from Customers like You
Feezor would not run Russell B. • Groton , CT • February 15, 2016
Replaced controller and starter relay
Read more
More
$88.95
- Compare At:
-
$105.85
- You Save:
-
$16.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491942
Refrigerator not cooling but running? This compressor start relay and overload kit fixes weak or failed start components. DIY repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Bad start relay David S. • Knoxville , TN • July 12, 2015
Wake up the morning after a big fourth-of-July cookout to find the refrigerator is running, but not cooling any more. Wife is mad, food is spoiling, and the kitchen is littered with every cooler in the house. No repair person can come by to look at the refrigerator for at least five days. I narrow down the problem to the start relay and I was able to find the exact part on AppliancePartsPros.
With two-day shipping, I get the part fast, and the kit came with everything I need (and then...
Read more
More
$97.61
- Compare At:
-
$116.16
- You Save:
-
$18.55
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760588
Oven light won't turn on? This light transformer steps down voltage to power your oven cavity lights. Moderate DIY repair restores illumination.
Do-It-Yourself Stories from Customers like You
Oven light would not work. Lori C. • Monongahela , PA • August 13, 2021
Replaced the transformer and it was fixed. Not a difficult fix at all.
Read more
More
$141.67
- Compare At:
-
$168.59
- You Save:
-
$26.92
Genuine Ge part
By: Ge
Part Number: WR09X10105
Fridge won't cool and makes clicking sounds? The compressor overload may have failed. Protects against overheating. DIY repair takes 15-45 minutes.
Do-It-Yourself Stories from Customers like You
GE frig was not cooling (clicking sound) Thomas H. • Falmouth , KY • July 24, 2021
We replaced the Run Capacitor and Overload switch (from youtube suggestion). It was a very simple swap out the old part with the new part.
Read more
More
$51.46
- Compare At:
-
$61.24
- You Save:
-
$9.78
Genuine Lg part
By: Lg
Part Number: 0CZZJB2014G
This capacitor stores and releases electrical energy to support the appliance's circuit during startup and operation. Replacing a weakened capacitor can restore reliable performance and reduce humming, hard starting, or stalling in the affected component.
- Provides a power boost at startup and helps stabilize voltage during operation
- Helps the connected component start promptly and operate smoothly under load
- Common failure signs include humming, slow or no start, or intermittent operation
- Contribute to overheating or a tripped breaker/fuse when the component tries to start
What's included: One capacitor. Install notes:
- Disconnect power at the breaker or unplug the appliance. Before handling, safely discharge the old capacitor using a proper resistor-rated tool.
- Photograph or note wire positions; move each lead to the same-labeled terminal on the new capacitor and ensure snug connections.
- Mount the capacitor securely in its bracket; keep terminals covered and clear of metal surfaces.
Do-It-Yourself Stories from Customers like You
Loud clicking from the back of my refrigerator Randy W. • Granbury , TX • March 04, 2015
Research question lead to others that had the same issue. Consensus lead to a common repair. Compressor overload switch going bad. After ordering the correct parts, I changed out both the switch and the motor start capacitor just in case. After cleaning the equipment, I then put everything back together. Results were, clicking gone, seems to be quieter operation because of cleaning, more efficient cooling and nerves calmed.
Read more
More
$43.79
- Compare At:
-
$52.11
- You Save:
-
$8.32
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387535
Fridge not cooling but lights work? This compressor overload stops overheating and prevents startup damage. DIY-friendly repair in about 1 hour.
This part fixes the following symptoms
-
Won't start
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Overload switch stopped working turning off the refrigerator compressor J Michael L. • Waxahachie , TX • August 06, 2016
Replaced overload switch and start relay with convenient repair set.Video available on website that gave step by step instructions. Followed the video steps for removal and installation.... plugged in the refrigerator compressor started up everything cool in minutes
Read more
More
$87.27
- Compare At:
-
$104.72
- You Save:
-
$17.45
Genuine Ge part
By: Ge
Part Number: WR08X10015
Refrigerator clicking but not cooling? A failed overload protector can prevent compressor startup. This part interrupts power during overheating.
More
$42.61
- Compare At:
-
$53.84
- You Save:
-
$11.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2183456
Refrigerator not cooling or compressor won't start? This overload protector prevents motor damage from overheating. DIY-friendly fix in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Refrigerator stopped working Patrick H. • Walland , TN • July 04, 2016
Used a muiltimeter to test all parts and ohm'ed out all parts. found out condenser fan motor seized up [open winding in motor] replaced that, and found that also caused the compressor overload and relay to fail, from over heating and over cycling, replaced both parts, powered up the refrigerator retested all electrical parts checked amp reading on all parts under load conditions,works good know, hope to get another 15 years out of this refrigator, its a maytag. over 20 years old.
Read more
More
$68.95
- Compare At:
-
$82.05
- You Save:
-
$13.10
Genuine Ge part
By: Ge
Part Number: WR8X122
Compressor won't start or kicks out after trying? This overload protector prevents motor damage. DIY-friendly repair, takes about 30 minutes to replace.
Do-It-Yourself Stories from Customers like You
Cooling fan runs but compressor tries to start and kicks out Dave F. • Painesville , OH • November 10, 2015
I read alot of blogs about the same similar symptom, but none described by exact problem. I kept reading how the compressor relay would make a click noise or sisal. I also found out the overload switch could cause a like symptom. The end result being that upon removal of the relay, it was discolored and made a rattling noise when shook. The overload switch was heat cracked on the plastic and looked like it had had enough. This was easily accomplished by using the repair mans print out for the...
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79