Power Nut Installation Parts
Genuine Ge part
By: Ge
Part Number: WD02X10109
Secures the upper spray arm to the dishwasher tub ceiling. Replace if missing, stripped, or broken to properly lock the spray arm in place.
Do-It-Yourself Stories from Customers like You
My spray arm fell off when the bolt backed out Doug W. • Minden , NV • January 31, 2015
Went ahead and replaced the arm and bolt/bushing.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X29714
Dryer not drying evenly or shutting off too soon? A faulty outlet thermistor causes inaccurate heat control. This sensor monitors exhaust temperature.
More
Genuine Bosch part
By: Bosch
Part Number: 00188978
Used to hold down the jet holder assembly.
Do-It-Yourself Stories from Customers like You
Left rear variable simmer gas burner on thermador prg364glus stopped working David B. • Lincoln , NE • February 23, 2017
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316001013
Size: 10-24 x 1.375 inch.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY304475
The Cycling Thermostat is an OEM part for Whirlpool dryers. This thermostat regulates the temperature inside the dryer by cycling the heating element on and off to maintain a consistent temperature. .
Causes of a bad cycling thermostat can include wear and tear over time, electrical faults, or damage due to overheating.
Symptoms of a bad Cycling Thermostat include:
- Clothes taking too long to dry
- The dryer not heating at all
- The dryer overheating
- Erratic or inconsistent drying temperatures
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
It was taking unusually long to dry a typical load Robert L. • Williamsburg , VA • November 15, 2014
I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 218252201
Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.
Do-It-Yourself Stories from Customers like You
Door racks/door stop broken. Jennifer S. • Lincoln , NE • December 13, 2020
I wasn’t sure where I could get parts for the fridge, Google brought me here. Super easy to look up model #’s and locate parts by type/location with the appliance map. I needed to change the racks and the doorstop. The racks were super simple. I would have succeeded with the doorstop too, but the holes at the bottom are stripped and the doorstop wasn’t secured correctly in the first place. So that’s frustrating, but appliance parts pros were easy to use, parts came quickly and The video from...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD18X214
Fix dishwasher leaks from cracks or tears in the pump connector. Requires removing dishwasher and pump access. Video guide available for DIY repair.
Do-It-Yourself Stories from Customers like You
Broken base spray arm tab that holds the bottom rotating spray arm in place Barry G. • Sinking Spring , PA • August 24, 2015
In the How to fix it your self section of Questions and Answers, your answers for removing the Base Spray Arm is incorrect. It states "just stick a screw driver into the base spray arm from inside the tub and turn", that does not work. Their are 2 tabs that in gauge the base spray arm with the tub. A 4 prong round wrench is required to insert from the bottom into the pump connector and turn the nut that sits inside.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10170540
Shoulder bolt screw that secures refrigerator door handles. Replace if missing, stripped, or loose to restore proper handle attachment and alignment.
Do-It-Yourself Stories from Customers like You
Broken door handle Kevin K. • Stevensville , MD • August 08, 2017
Simple Repair.
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D510702
Dryer not heating or overheating? A failed limit thermostat stops heat when temps climb too high. Simple DIY fix restores safe, reliable drying.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74006515
The Oven Door Panel Screw is an OEM replacement part for Whirlpool ovens and ranges. It is a component used to fasten the outer panel to the interior metal door frame.
Causes of a bad oven door panel screw can include normal wear from repeated opening and closing of the door, damage such as stripped threads from overtightening, or corrosion over time inhibiting its fastening function.
Symptoms of a bad oven door panel screw include:
- The outer panel becoming loose, wobbly, or detached
- Gaps appearing around the door seam
- Scratches or other damage to the door panel
- Reduced insulation quality of the door assembly
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Door handle of upper oven broke off Jodi G. • Oak Park , MI • December 01, 2014
Start by removing the frame on the sides and bottom of the door. (Do not unscrew the corner screw holding the side frame and bottom together.) Be careful the glass will fall once the last screw is removed from the bottom so hold tight. Carefully remove glass and set aside. Remove top frame that held the handle. Once all the frame work and outer glass is removed unscrew the bracket that held the door handle from the door. Taking the top frame and bracket insert screw and washer and screw the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD02X10169
Specs: B-16 HXW 1/2 SS
Do-It-Yourself Stories from Customers like You
Middle spray arm was not rotating Glenn S. • Holly Springs , NC • February 22, 2015
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you .
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M80
This replacement part is a high-limit thermostat, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This high-limit thermostat is typically found in dryers and controls the heat inside the drying tub. This is especially important as different dryer settings require different amounts of heat. If the high limit thermostat works properly, the temperature inside the tub should reach the correct amount during each drying cycle with no issues. A new high-limit thermostat might be needed if the user notices that the dryer is unable to reach the appropriate level of heat for a certain drying cycle. This is also true if the dryer is becoming too hot when the heat is supposed to be set to low. Make sure the dryer is cooled down prior to replacing this part as the areas in the back of the dryer can become very hot during use. Be sure to reference the specific user manual for more instructions on how to replace the thermostat. This thermostat is sold individually and is a genuine OEM part. The thermostat is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
No heat Roland J. • Hawthorne , NJ • May 11, 2015
Replaced thermal stats
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8573028
Dryer won't heat or stops heating? This high limit thermostat monitors heater housing temperature and cuts power if it overheats. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Noisy bearings coming from the washing machine excessive dry times with the dryer Steve E. • Rochester Hills , MI • January 03, 2019
Washing machine should have been an easy fix that I had done before but ran into problems with the upper bearing and the bearing diameter on the shaft (a no go situation). By the time I was able to get the bearing seated I had damaged the new bearing. Much to my surprise Cierra in customer service sent me out a new bearing kit. I was then able to get the washer up and running with the new bearing kit and motor stator replacement.
The dryer was a matter of replacing all of the electrical...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10590
Replacement screw for refrigerators. Secures handles, panels, and internal components. Order if yours is missing, stripped, or lost during repairs.
Do-It-Yourself Stories from Customers like You
Handle broke at screw holes. Thomas B. • Holiday , FL • December 02, 2017
Took about 5 min to replace the handle with the parts ordered. Thank you for the fast service.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X10189
Dishwasher leaking from underneath? A cracked or worn check valve assembly often causes pooling water. DIY-friendly repair takes about 30 minutes.
Do-It-Yourself Stories from Customers like You
I had a leak from the inlet sump Gabriela P. • Commack , NY • September 17, 2017
I ordered the part plus I replaced all of the other rubber/plastic parts just in case. My dishwasher is ten years old and still works great.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131168200
This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.
- Fastens components to frames, brackets, and covers
- Replaces missing, damaged, or rusted screws
- Helps reduce looseness, vibration, and rattling noises
- Restores proper alignment of panels and assemblies
What's included: One screw
- Disconnect power before servicing; shut off gas/water if applicable
- Start the screw by hand to avoid cross-threading; use the proper driver
- Tighten snugly—do not overtighten to prevent stripping metal or plastic
Do-It-Yourself Stories from Customers like You
Grill on air duct had an item melt on to it and partially block air flow Charles C. • Orchard Park , NY • November 25, 2017
It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube.
I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to...
Read more
More