Water Temperature Sensor Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193762
Dishwasher won't power on or display lights? This thermal fuse kit protects against overheating. Easy 10-minute DIY fix with video instructions.
Do-It-Yourself Stories from Customers like You
All the leds on the front panel were off and there was water sitting in the bottom of the dishwasher from the previous cycle it appears the power was off to the unit Ryan R. • Bedford , NH • October 24, 2015
I first verified the house panel circuit breaker was not tripped. It wasn't so I removed the bottom kick plate of the unit, using a circuit cricket I verified the power feed to the unit was live.
The bottom kick plate had a trouble shooting guide in a plastic sleeve which I opened and reviewed. Based on information in there it appeared the TOC was likely the issue. (We recently lost power and used a stand by generator. Previously when we did the the dishwasher had a blinking LED on the...
Read more
More
$57.57
- Compare At:
-
$67.93
- You Save:
-
$10.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3390291
Dryer won't heat or shuts off during cycle? High limit thermostat cuts power when overheating occurs. Quick 2-screw fix restores heating function.
Do-It-Yourself Stories from Customers like You
No heat in dryer J B. • Freeport , FL • September 19, 2014
Changed parts
Read more
More
$60.52
- Compare At:
-
$71.41
- You Save:
-
$10.89
Genuine Whirlpool part
By: Whirlpool
Part Number: 675813
The Thermal Fuse is an OEM part for Whirlpool dishwashers. It serves as a crucial safety component that prevents the appliance from overheating by cutting off electrical power if the temperature inside the dishwasher becomes too high. This helps protect both the dishwasher and your home from potential fire hazards.
Causes of a bad thermal fuse can include overheating due to blocked air vents, malfunctioning components that lead to excessive heat, or electrical surges that damage the fuse. Over time, regular wear and tear can also contribute to the fuse's failure.
Symptoms of a bad thermal fuse include:
- The dishwasher not starting or running
- The control panel not responding
- The dishwasher stopping unexpectedly mid-cycle
- No indicator lights or sounds when attempting to operate the dishwasher
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher just stopped working, no power Michelle W. • Gillett , WI • April 05, 2014
My friend researched online what would make a dishwasher just stop working, no power. The person on the you tube video showed how to first start with the thermal fuse. Then searched online for the thermal fuse. You had the part for a small price. I felt it was worth trying to see if that may be the issue. IT WORKED!! I was without a dishwasher for over a year, was planning to by a brand new one but for $23.00 now have a working dishwasher!! YEAH!
Read more
More
$51.62
- Compare At:
-
$60.91
- You Save:
-
$9.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281135
Dryer not heating or flame goes out after igniting? This flame sensor monitors burner temperature to regulate gas flow. Easy 15-minute DIY repair.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
$48.26
- Compare At:
-
$57.43
- You Save:
-
$9.17
Genuine Whirlpool part
By: Whirlpool
Part Number: W10316760
This sensor monitors temperature inside your refrigerator compartments and sends signals to the control board for proper cooling. It ensures your refrigerator maintains the correct temperature for food safety and energy efficiency. Replace this if your refrigerator runs constantly, doesn't cool properly, or shows inaccurate temperature readings.
Do-It-Yourself Stories from Customers like You
The refrigerator was freezing the food Gary A. • Bonney Lake , WA • January 15, 2021
Watched a video. Ordered a thermistor. Made the fix. $100 total including expedited shipping. Diagnosing the problem was more stressful than fixing.
Read more
More
$48.46
- Compare At:
-
$57.67
- You Save:
-
$9.21
Genuine Bosch part
By: Bosch
Part Number: 00645149
Flexible plastic tube that carries used wash water from the dishwasher sump to household drain plumbing. Replace if cracked, pinched, or leaking.
Do-It-Yourself Stories from Customers like You
A mouse chewed into my plasic drain pipe on the dishwasher Charles R. • Williamstown , NY • November 12, 2014
Ordered a new plastic drain pipe for the dishwasher and replaced the one with holes. Ground shipping got it to my house the next day - outstanding.
Read more
More
$21.77
- Compare At:
-
$25.91
- You Save:
-
$4.14
Genuine Ge part
By: Ge
Part Number: WD24X33918
The Elbow Hose and Clamps Kit is an OEM replacement part for GE dishwashers. This kit includes an elbow-shaped hose and the necessary clamps to secure it in place. It is designed to connect components in the dishwasher's water drainage or inlet system, ensuring a secure and leak-free flow of water during operation.
Over time, hoses can degrade due to exposure to heat, water pressure, and detergents. Clamps may also lose their grip or become corroded, leading to leaks or improper connections. Replacing the elbow hose and clamps restores the appliance's functionality and prevents water damage.
Symptoms of a bad elbow hose or clamps include:
- Water leaking from the dishwasher during operation
- Error codes related to water flow or drainage issues
- Reduced water pressure or improper draining
- Visible cracks, wear, or corrosion on the hose or clamps
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Wash pump elbow on dishwasher wore out and leaked Jerry K. • Telford , PA • March 30, 2024
Irdered bew elbow , pulled dishwasher and replaced it
Read more
More
$14.34
- Compare At:
-
$17.06
- You Save:
-
$2.72
Genuine Lg part
By: Lg
Part Number: 5231JA2006F
Reduces contaminants and odors from your refrigerator's water and ice supply. Replace every 6 months for optimal performance. Verify fit by model number.
This part fixes the following symptoms
-
Leaking
-
Ice maker not making ice
-
Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You
Lg water filter head would not engage Henry W. • Hoffman Estates , IL • September 08, 2015
I have replaced the LG water filter myself for the past 10 years. This time I inserted the filter, did not feel the thread was engaged, I turned the filter clockwise and no water came through the filter. So I figured that the filter head might be bad.
I checked with YouTube and learned that to replace the filter head one just have to remove the housing or head, remove the water inline and outline and put it back.
I used Google to search "LG water filter housing" (I did not know yet it was...
Read more
More
$58.95
- Compare At:
-
$69.56
- You Save:
-
$10.61
Genuine Ge part
By: Ge
Part Number: WR50X10071
Fixes heavy frost buildup on evaporator coils and warm fresh food compartment. Clips onto evaporator assembly. Straightforward DIY with video guide.
Do-It-Yourself Stories from Customers like You
The evaporator coil kept getting heavily frosted and the compressor ran almost continuously Reid D. • Santa Maria , CA • April 01, 2016
The defrost heater element looked good and had continuity. The defrost thermostats checked good, so that just left the Defrost Module as the likely suspect. I installed a new defrost control module and thermostats. The thermostats were inexpensive and the old ones could have been intermittent,
The only "tricky" part was finding out how to get to the back screw that holds the main control panel. Discovered that the return air duct surrounding the control panel needed to come off. It helps...
Read more
More
$31.95
- Compare At:
-
$37.70
- You Save:
-
$5.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WP303395
Dryer won't heat or overheats? High limit thermostat prevents overheating by shutting off heat at high temps. Easy DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Would run fine but would not dry clothes something would not allow the dryer to heat Todd K. • Burr Oak , MI • March 10, 2017
For several months we could smell a slight odor of propane in the laundry room and wondered why, just didn't seem like it was enough to be overly concerned, but thought something must be wrong with the dryer, but it was still working. We just didn't know how inefficiently. Then the extra time it took to dry a load of clothes progressively seemed to get longer, but things still seemed to work fine and the clothes got dried, given enough time. Then approximately 3 weeks ago we noticed the dryer...
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195091
Fixes no heat during drying, wet dishes, or blinking sanitized light. This safety thermostat cuts power if water overheats. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Dishes not dry at the end of the cycle. The heating element is not heating. Richard J. • Watertown , SD • March 10, 2023
Performed diagnostic tests. Had code for no heat. I performed a continuity check on the element and found it to be bad. I replaced the Heating Element per the video directions they provided on their website. I also replaced the Hi-Limit Thermostat since I was in that area already. The dishwasher is repaired for a fraction of the cost of what I would have paid a repair person to do the work.
Read more
More
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Lg part
By: Lg
Part Number: 6615JB2005H
Freezer icing up or not defrosting? The defrost sensor monitors temperature during defrost cycles. DIY-friendly repair with basic tools in 30 minutes.
Do-It-Yourself Stories from Customers like You
Lg french door referigerator/ freezer error code er dh Matthew W. • Columbus , NJ • November 20, 2014
Replaced defrost sensor in freezer compartment, if you are handy this is a do it yourself job. The cover in the freezer section just pops out not tools needed. You will need a few small zip ties and some cutters to remove the old zip ties. Take a picture were the old sensor was before removing and reinstall in the same place. I used a meter to check continuity of the defrost element and found the element to be ok. I was quoted $85 to have someone come to the house just to check the unit and...
Read more
More
$34.75
- Compare At:
-
$41.00
- You Save:
-
$6.25
Genuine Speed Queen part
By: Speed Queen
Part Number: D518649
Dryer won't heat or start? A failed thermal fuse assembly cuts power when temps get too high. Common fix for no-heat issues. Takes 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Cracked heater element in speed queen dryer Wendell H. • Melbourne , FL • October 09, 2019
I found a few videos on YouTube about other dryers that gave me enough information to figure out my own. I was able to pull out the heater element and replace it with a new one that arrived the day after I purchased it. I also replaced the thermal fuse and thermostat.
Read more
More
$7.66
- Compare At:
-
$9.04
- You Save:
-
$1.38
Genuine Ge part
By: Ge
Part Number: WE04X26138
The High Limit Thermostat is an OEM replacement part for GE electric dryers. Located internally near heating components, this safety device monitors drum temperatures to prevent excessive heat accumulation.
Causes of malfunction relate to water residues creating shorts, loose terminals detaching wiring due to vibrations, or a worn heat sensitive mechanism reacting slower over time.
Symptoms involve:
- Repeated thermal cut-off trips mid-cycle
- Inability to select heat settings without errors shown
- Bleach or smoke smells indicating unregulated temperatures
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
High temp sensor blew out drier would not light. Gary H. • Boonville , NY • May 16, 2020
Did continuity tests on the sensors, till I figured out what one was bad.
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Samsung part
By: Samsung
Part Number: DA97-06317A
Securely houses your refrigerator's water filter for clean, purified water. Replace if leaking after filter changes or cracked from wear. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
Replacement water filter would not screw into housing on samsung refrigerator Larry C. • O'fallon , IL • February 07, 2016
After looking online and discovering that others who had used a knockoff brand filter to "save money" had the same problem, I concluded the only solution was to replace the filter housing. Found the one I needed on AppliancePartsPros.com. Most important to me was the video explaining how to replace the filter housing - it made the task a snap to complete. The price was also competitive with other sources. Shipping was half that charged by Samsung. Not only was it cheaper, but it was also super...
Read more
More
$109.72
- Compare At:
-
$130.57
- You Save:
-
$20.85
Genuine Bosch part
By: Bosch
Part Number: 00298564
Replaces cracked, kinked, or leaking dishwasher drain hose. Connects unit to household drainage system. Essential when hose is damaged or worn.
Do-It-Yourself Stories from Customers like You
Drain hose on bosch dishwasher was leaking due to getting squashed Alan M. • Phoenix , AZ • June 12, 2014
Ordered replacement drain hose, left hand panel of dishwasher removed (remove 2 screws in front left trim panel & friction fit clip at top back then slide up & off. This reveals the O-ring drain hose connection point. You need to remove the retainer block where the hose exits the appliance.
Old hose pulls out and new hose pushes in. In the end a very easy installation.
Most of the time spoent here is removal & reinstallation of dishwasher back into position - the actual hose swap takes 10 mins
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07