Power Nut Installation Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 131168200
This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.
- Fastens components to frames, brackets, and covers
- Replaces missing, damaged, or rusted screws
- Helps reduce looseness, vibration, and rattling noises
- Restores proper alignment of panels and assemblies
What's included: One screw
- Disconnect power before servicing; shut off gas/water if applicable
- Start the screw by hand to avoid cross-threading; use the proper driver
- Tighten snugly—do not overtighten to prevent stripping metal or plastic
Do-It-Yourself Stories from Customers like You
Grill on air duct had an item melt on to it and partially block air flow Charles C. • Orchard Park , NY • November 25, 2017
It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube.
I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to...
Read more
More
$19.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: FAF30369201
Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.
Do-It-Yourself Stories from Customers like You
Was flashing an ( ue ) uneven code Carl A. • Cleveland , OH • March 15, 2016
We had a repair man come and tell us the needed repair at the cost of 70.00
I ordered the parts and saved money.
Read more
More
$10.43
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE04X25195
Fix a dryer that won't heat properly or overheats with this thermostat. Senses exhaust temperature to regulate heat cycles and prevent damage.
More
$20.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Samsung part
By: Samsung
Part Number: DE60-20066A
Secures your microwave to kitchen cabinets during installation. Replace missing, stripped, or damaged bolts for safe and stable mounting.
Do-It-Yourself Stories from Customers like You
Removed 1 year old microwave to paint kitchen internal thread assembly stripped Joel L. • North Richland Hills , TX • December 01, 2016
I took the machine screws out of the outer panel for the right side only. Then pull the panel back a bit to release the lips from the front of the machine and had immediate access to the internal assembly that housed mounting nut.
Order the new parts from AppliancePartsPro.com during the Thanksgiving week. Still received via FedEx in short time due to their same day shipping - which was greatly appreciated and surprising. Most small part places take a while to get the product out the door,...
Read more
More
$34.25
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP37001136
This cycling thermostat regulates exhaust temperature by switching the heater on and off to maintain proper drying heat. Replacing a failed thermostat restores consistent temperatures, helps auto-dry timing, and protects against fabric-damaging overheating.
- Controls the heating circuit to maintain target drying temperatures
- Provides temperature feedback for accurate auto-dry operation
- Common symptoms: long dry times, very hot drum/cabinet or scorching odors, auto-dry not advancing correctly, or no heat if the thermostat fails open
- Typically mounted on the blower housing to sense exhaust air temperature
Includes: 1 cycling thermostat. Install notes:
- Disconnect power; for gas dryers, also shut off the gas supply
- Access the thermostat (commonly on the blower housing); remove the necessary panel(s)
- Transfer wires one at a time to the new thermostat and mount it flat against the housing
- Reassemble, verify clear venting/airflow, and run a test cycle
Do-It-Yourself Stories from Customers like You
Heat was too high Douglas S. • Mesa , AZ • May 17, 2015
I went ahead and ordered the element, and the 2 different thermostats not knowing exactly which one might be the problem. My My Maytag opens from the front and it was actually pretty easy to get into. Also gave me the opportunity to vacuum out the inside of the dryer. Pop the top off, remove the wires that connect the door switch (noting the colors and placement), take off the 2 inside nuts that hols the fron on, pull it forward and lift it off, 3 inside screws to take out to inside lint part...
Read more
More
$81.71
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406653
This sensor harness connects the dryer's moisture sensor bars to the main wiring, helping the control or timer read moisture levels so Auto Dry cycles can advance and deliver consistent, reliable drying performance.
- Provides the electrical path between the moisture sensor bars and the control/timer
- Enables the dryer to sense wet fabrics and adjust or advance Auto Dry cycles
- A damaged or open harness can cause Auto Dry to not advance, run too long, or stop early
- Contribute to inconsistent dry times or a "Sensing" indicator that behaves abnormally
What's included: One sensor wire harness Install notes:
- Disconnect power before servicing
- Access the sensor bars at the front bulkhead; note wire routing and clip locations
- Transfer routing/clips from the old harness; connect to both sensor bars and the main harness plug, ensuring snug terminals and clear wire paths
- Restore power and run an Auto Dry test; inspect/clean the sensor bars and check harness continuity
Do-It-Yourself Stories from Customers like You
Dryer turning off on auto cycle with clothes still damp Mark F. • Topsham , ME • January 31, 2015
Replaced 3 low cost parts as advised by Appliance Parts Pros. Saved the labor costs by troubleshooting and replacing parts with their great videos. Works like new, and took 15 minutes to complete the repair.
Read more
More
$80.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WR1X1726D
Assembly screw kit for refrigerators. Secures handles, shelf tracks, door hinges, and interior panels. Replace missing, stripped, or lost screws.
Do-It-Yourself Stories from Customers like You
Handle broke Gina M. • Sebring , FL • March 24, 2021
SELF.
Read more
More
$32.50
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP307249
Fixes dryers that won't shut off, run too hot, or take too long to dry. This cycling thermostat regulates drum temperature. 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Regular cycle did not work and air fluff didn't work Ronald R. • Jupiter , FL • March 15, 2018
Put both thermostats in as I did not know if the unit was cycling on high limit at times. Fixed both issues plus I used my lawn blower and blew all the lint out of dryer and short 3' hose. I also lubed rear drum bearings. Works like new. Ron R
Read more
More
$75.68
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: EBD50964602
The Pressure Sensor is an OEM replacement part for LG dryers. This sensor monitors the airflow or pressure within the dryer, helping to regulate drying cycles and ensure efficient operation. By detecting blockages or changes in airflow, it plays a critical role in maintaining proper performance and preventing overheating.
Over time, the pressure sensor can fail due to wear, electrical issues, or buildup of lint and debris. Damage to the sensor or its connections can cause the dryer to operate inefficiently or stop functioning altogether.
Symptoms of a bad pressure sensor include:
- Dryer not heating properly
- Extended drying times
- Error codes related to airflow or pressure
- Dryer shutting off unexpectedly during cycles
This OEM LG part is also compatible with Sears/Kenmore dryers.
More
$23.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Bosch part
By: Bosch
Part Number: 10010119
Thermister
Do-It-Yourself Stories from Customers like You
Bosch dryer would not start. Roy K. • West Chester , PA • June 12, 2018
After reviewing various posts on the internet, I tested the high heat temperature limiter and determined it was faulty due to lint buildup. Ordered the parts from AppliancePartsPros.com on Friday afternoon and parts were delivered on Saturday afternoon. Replaced the parts- dryer works as good as new.
Read more
More
$37.23
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 215474201
Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.
Do-It-Yourself Stories from Customers like You
S or 5 e ce later that changes to s or 5 y ce Amritt V. • Yorkyown , VA • October 21, 2017
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest...
Read more
More
$15.34
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3403607
Fix a dryer that won't heat or shuts off after 10-15 minutes with this thermal cutoff fuse. Common DIY repair for temperature detection issues.
Do-It-Yourself Stories from Customers like You
Dryer would run but wouldn't heat Todd B. • Dummerston , VT • August 14, 2016
I replaced the thermal cut-off sensors and the cutoff-Tml
Read more
More
$36.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Bosch part
By: Bosch
Part Number: 00422272
Dryer not heating or shutting off mid-cycle? A faulty temperature limiter is often the cause. Simple 15-minute fix—just remove back panel and replace.
Do-It-Yourself Stories from Customers like You
Dryer was not heating Kyle C. • Springhill , TN • December 06, 2016
I have a Bosch nexxt 500 series dryer that stopped heating. It was still running fine, just no heat. I did some research and found the Limiter as the possible problem. I pushed the red reset button. The dryer started heating up, but with in 1 cycle kicked off again. I called A.P.P. and spoke to Cecilia. She was very helpful. After a brief description of my situation she recommended just to replace the Limiter. I did so and that fixed the problem. Very simple replacement. It look longer to take...
Read more
More
$75.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 4930EL2003B
This is a mounting holder or grille that secures the moisture sensor bars inside the dryer drum area. The moisture sensor detects how wet the clothes are and signals the control board to end the cycle when they're dry. Replace this holder if it is cracked, broken, or missing, which can cause the sensor bars to be misaligned and lead to clothes coming out still damp or the dryer running too long.
Do-It-Yourself Stories from Customers like You
Sheets broke cover guide with filter and sensor Stefan H. • Ponte Vedra Beach , FL • March 15, 2019
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here.
Dryer is fixed, I'm happy.
Read more
More
$35.34
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1182
Dryer won't start or has no power? A blown thermal fuse is the likely cause. This safety device cuts power when overheating occurs. DIY fix.
Do-It-Yourself Stories from Customers like You
Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting Timothy E. • Bellvue , CO • September 15, 2019
When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was...
Read more
More
$42.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB01T10008
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't close tightly new hinges didn't fix the problem Paul S. • East Wenatchee , WA • October 26, 2020
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door.
The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time.
I replaced the inside steel panel. Took about an hour. Was able...
Read more
More
$11.95
IN STOCK
Most orders arrive by Wednesday, November 25