Need Help?
Call
Ice dispenser only making crushed ice instead of cubes? This solenoid valve kit fixes the cube/crushed ice selector. Easy DIY repair with video guide.
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more
Ice maker not making ice or water dispenser not working? This refrigerator water inlet valve controls water flow. Common DIY fix, 30-60 min install.
Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes ! Read more
Fix slow or no water/ice dispensing with this refrigerator water inlet valve. Stops leaking dispensers and restores proper water flow. DIY repair.
Replaced the dual water intake valve Read more
Washer slowly filling or dripping when off? A faulty vacuum break allows water to siphon back into the drum. Takes 30 minutes with our video guide.
My 15 year old whirlpool washer top was rotting away and my wife was about to buy a new one. a 1 min search on google brought me to this site and within 5 mins found all the parts I needed, Received my order in 3 days and now we're back in business for a total cost of $159 instead of $500 to $600. Will use this site again and have told a few people already. Thanks Rob Read more
If water remains in your dishwasher after draining or returns to the tub, the drain check valve may have failed. Easy 10-30 minute DIY repair.
After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed. Read more
Dishwasher not filling with water? The water inlet valve controls water flow into your dishwasher. DIY-friendly repair, typically takes 40 minutes.
I figured the valve that allowed water into the dishwasher was bad, or some controlling function of this process. I went online, typed in model number and had a full exploded view of the parts in my dishwasher. I ordered the inlet solenoid valve as the first step to what may be wrong. Turns out this part was the problem. With the online video it made replacement a breeze. Thank you APP for the RIGHT part AND instructions. Online purchasing and delivery are easy and timely. Read more
Converting your dryer from natural gas to propane? This LP conversion kit includes orifices and instructions. DIY-friendly in under an hour.
I searched the internet and found the conversion kit to LP gas at Appliancepartspros.com. their price was the least expensive. The instructions were excellent in describing the removal of the nat. gas orifice and replacement with LP orifice. The part was delivered 3 days after ordered by Fed Ex., a speedy delivery! I finished installing my clothes dryer and it works fine. I have some experience with such equipment but recommend professional installation for reasons of safety! Thank you, R.P. Read more
The Whirlpool refrigerator dual solenoid icemaker water inlet valve is an OEM replacement part responsible for controlling the water flow to the refrigerator's icemaker. It is typically located at the back of the refrigerator, near the bottom, where the water supply line connects to the refrigerator. The water valve receives signals from the refrigerator's control board to open and close, allowing water to flow into the icemaker. The Whirlpool water inlet valve can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances. This part fixes the following symptoms:
Hello, After watching your repair videos and reading the other comments regarding the ice maker I decided it needed to be replaced due to the old age (12 years) and mysterious flakes in the ice cubes and the solenoid valves were recommended to fix the hollow ice cube problem. After watching the repair videos on the ice maker and solenoid valves I decided I could do the replacement myself. Not needing a service technician to be called out. Also while waiting for the parts to arrive, I noticed... Read more
This is an electromagnetic water inlet valve that controls the flow of hot water into the washing machine. It opens when the washer calls for hot water during the wash or rinse cycle and closes when the cycle is complete. Replace this valve if the washer is not filling with hot water, fills slowly, leaks from the back of the machine near the hose connections, or continues to fill when the machine is off.
I wanted to only mess with the washer in a single 30-minute session. So, I assumed both solenoid valves were leaking and purchased replacements. It was a simple project, as well as a good chance for my 13-year-old son to accomplish something practical. Steps/tools used, in order: STEP/TOOL 1: Pull the washer electrical plug from the wall; no tools needed. STEP/TOOL 2: Shut off the hot and cold supply hose valves in the wall; no tools needed. STEP/TOOL 3: Unscrew the hot and cold water female... Read more
Fix a washer that won't fill with water or fills slowly. This water inlet valve controls water flow into the tub. DIY repair takes 30-45 minutes.
Bought new valve replacement for the washer Read more
Ice maker not making ice or water dispenser not working? This water inlet valve controls flow to both systems. DIY repair takes about 10 minutes.
I had verified that the water supply was healthy, so it was either the icemaker unit or the water valve. I replaced the icemake first, based on a the pareto showing it was the culprit for most other people, but it didn't help. That replacement was straightforward; the hardest part was reaching all the way back to unclip the wiring harness since I am too lazy to totally empty the bottom freezer and remove the door. So the next step was the water valve. The hardest part of this was pulling the... Read more
Fix ice maker overfilling, leaking water lines, or no ice production. This water inlet valve assembly controls water flow to your ice maker and dispenser.
Replaced inlet valve and ice maker Read more
Ice maker not filling or water dispenser not working? This water inlet valve controls flow to both. Easy 30-minute DIY fix for most refrigerators.
I replaced the Inlet Valve. The part arrived ahead of schedule and was approximately $10 cheaper from AppliancePartsPros.com. This is the second time that I ordered parts from this company and have had great success with each one. Thanks Larry Read more
Ice maker stopped working or water dispenser won't stop? A faulty water inlet valve often causes these issues. Simple 15-20 minute DIY repair with video help.
The repair job took me less than 15 minutes. I removed the lower back panel from the back of the fridge then disconnected the power to the fridge and turned off the water supply to the fridge. I then looked closely at how the water valve 2-way was installed and removed it. Then I connected the water supply lines for the water and ice then connected the water valve line and I was done. It was that simple. Saved an appliance service call of about $100. and did the job myself. Read more
Ice maker not filling or water dispenser stopped working? This water inlet valve controls water flow to both systems. DIY-friendly repair for most users.
Once I was convinced that the water supply and filter wasn't the problem, I took the back protective panel and looked at the valve assembly. It looked corroded, especially on top where the ?pistons for the solenoids?would project into. I ordered the part and it was on my doorstep in TWO days...really fast. The part was slightly different from the one that I was replacing in that the part was "angled out." This was not a problem. All that did was tilt the fitting for the copper water line... Read more
If your dryer won't stay lit or shuts off after a few minutes, the gas limiter may be faulty. This regulator controls safe gas flow to the burner.
Removed LP Orifice and LP Gas limiter. Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP. I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.