Crosley Cogged Pump Hose Parts

Best Seller

Genuine Whirlpool part

Crosley Whirlpool Direct Drive Washer Pump

By: Whirlpool

Part Number: WP3363394

The Direct Drive Washer Pump is an OEM part for Whirlpool washing machines. It is responsible for pumping water out of the washer during the drain cycle, ensuring that the washing machine drains efficiently after each wash.

Causes of a bad direct drive washer pump can include blockages from debris or foreign objects, wear and tear from regular use, damage to the pump impeller, or electrical issues affecting the pump motor. Over time, these factors can hinder the pump's performance, leading to operational issues.

Symptoms of a bad direct drive washer pump include:

Washer not draining water properly
Unusual noises during the drain cycle, such as grinding or humming
Water leaks from the bottom of the washer
Washing machine stopping mid-cycle due to drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Crosley Drain Pump

4.9 (200)

By: Whirlpool

Part Number: WPW10348269

The Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing wastewater from the dishwasher tub during the drain cycle, ensuring that the dishwasher operates efficiently and effectively.

Causes of a bad drain pump can include clogging from food particles and debris, damage to the pump impeller, or electrical failures within the pump motor. Over time, regular use can lead to wear and tear that affects the pump's performance.

Symptoms of a bad drain pump include:

Water not draining from the dishwasher
Standing water at the bottom of the dishwasher after a cycle
Unusual noises during the drain cycle
Error codes related to drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not drain

Do-It-Yourself Stories from Customers like You Dishwasher stopped draining water the pump was running (i could hear the noise) but water would not go away Evgueni P. • San Mateo , CA • February 08, 2015

I've opened sump housing to check for clogging but it was clean. When I removed check valve to inspect it I've found out that the round part of the valve was missing so I figured it might've blocked the water exit at drain hose or something like that. So I pulled the dishwasher out to get a full access to drain hose connector and the pump. Upon disconnecting the drain and checking its connector I indeed found the round piece totally blocking the hose and acting as a seal. I removed the piece... Read more

$59.79

Compare At:: $71.02
You Save:: $11.23

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Drain Pump

4.9 (79)

By: Whirlpool

Part Number: WPW10605427

The Water Pump is an OEM replacement part for Whirlpool washing machines. This component is responsible for circulating and draining water during the wash and rinse cycles, ensuring proper cleaning and rinsing of clothes.

Causes of needing to replace the water pump can include normal wear and tear over time, clogging or obstruction by debris or foreign objects, or mechanical failure due to excessive strain or motor burnout.

Symptoms of a faulty water pump include:

Failure to drain water from the washer tub
Leaking or standing water in the washer drum
Unusual noises or vibrations during operation
Incomplete or insufficient water circulation during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.

Do-It-Yourself Stories from Customers like You Pump was getting jammed intermittently Christopher G. • Mc Kees Rocks , PA • April 26, 2024

The original pump was getting jammed intermittently, more and more often. I cleaned it out, but that didn't help the jamming. So I ordered a new pump. Have your new pump on hand and look at it to see how it attaches. The original pump, a different part number than the replacement, lasted about 7 years of almost everyday use, with multiple loads each day. My washer model Maytag MHW5500FW0 has the pump at the bottom back, in an awkward position. This took me about 2 hours due to the awkward... Read more

$53.95

Compare At:: $64.74
You Save:: $10.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Dishwasher Food Chopper

4.9 (355)

By: Whirlpool

Part Number: W10083957V

The Dishwasher Food Chopper is an OEM part for Whirlpool dishwashers. It's designed to break down food particles that are washed off dishes during the cleaning cycle. This prevents large debris from clogging the dishwasher's drain and ensures that water remains clean throughout the cycle, enhancing the machine's cleaning efficiency.

A malfunctioning or worn-out food chopper can lead to several problems, such as poor cleaning results due to food particles being redeposited on dishes, or even clogs that can strain the dishwasher's pump and filters.

Symptoms of a bad Dishwasher Food Chopper include:

Dishes coming out with food particles still on them
The dishwasher making unusual noises indicating a struggle or blockage
Water not draining properly, suggesting a possible clog

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You The food chopper was broken Terry W. • Danville , CA • February 02, 2019

Remove upper and lower baskets for access. Remove 4 Torx screws holding drain/filter assembly, accessing last screw by rotating the water duct clockwise. Be sure to first un-clip the water duct at top and rear of dishwasher so that it can be moved. (Take the opportunity to remove accumulated deposits behind the water duct). Remove the drain/filter assembly and then remove the single screw holding the food chopper housing. Then remove the chopper assembly which is likely to be in pieces if it... Read more

$50.55

Compare At:: $60.66
You Save:: $10.11

IN STOCK

Ships Monday Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Frigidaire part

Crosley Drain Pump Assembly

4.9 (115)

By: Frigidaire

Part Number: A00126401

The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It plays a critical role in the dishwasher's operation by removing the used water at the end of each wash cycle, ensuring the machine is ready for the next load. This assembly includes the pump that powers the expulsion of water, along with any necessary housing and fittings to connect it securely to the dishwasher's system.

Causes of a bad part can vary from clogs formed by food particles or other debris, to mechanical failure of the pump motor itself.

Symptoms of a bad Drain Pump Assembly include:

Water not draining properly from the dishwasher
Unusual noises coming from the pump area
The dishwasher fails to start a wash cycle due to the system detecting water from a previous cycle still inside.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms

Will not drain

Do-It-Yourself Stories from Customers like You Dishwasher was not draining Bryce K. • Ames , IA • March 16, 2015

After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed. Read more

$100.26

Compare At:: $119.31
You Save:: $19.05

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Crosley Circulation Pump Motor Kit

4.9 (172)

By: Frigidaire

Part Number: 154844301

The Circulation Pump Motor Kit is an OEM replacement part for Frigidaire dishwashers. This essential kit contains the circulation pump motor, which is responsible for circulating and distributing the water and detergent solution throughout the dishwasher tub during the wash cycle.

Causes of needing to replace the circulation pump motor kit in a dishwasher can include normal wear and tear over time, electrical malfunctions, or physical damage to the pump motor or impeller components due to debris or foreign objects.

Symptoms of a faulty circulation pump motor kit include:

Inadequate water circulation or spray arm rotation during the cycle
Loud or excessive noise coming from the pump area
Leaking or pooling of water around the pump housing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

This part fixes the following symptoms

Won't start
Noisy

Do-It-Yourself Stories from Customers like You The dishwasher was going through all its cycles filling with water and discharging the soap dish would open but the soap was still in the tray just wet Joel C. • West Haven , CT • March 19, 2017

Replaced the pump motor. Works great again. I saw the picture of the part on the website so I knew I was getting the right part and watched the video to see if there were any shortcuts. Easy job. Read more

$179.95

Compare At:: $214.14
You Save:: $34.19

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Crosley Frigidaire Drain Pump

4.8 (156)

By: Frigidaire

Part Number: 137221600

The Frigidaire Drain Pump is an OEM part for Frigidaire washing machines. It plays a crucial role in the washer's operation by removing water from the wash tub at the end of each cycle, ensuring your clothes are properly drained before the spin cycle.

Causes of a bad drain pump can include blockages from debris such as coins, lint, or small items that escape from clothing, as well as motor or impeller damage. Electrical failures can also impair pump function, leading to inadequate water removal.

Symptoms of a bad Frigidaire Drain Pump include:

Water not draining completely from the washer
Unusual noises, like humming or buzzing, indicating the pump is struggling
Washer stopping mid-cycle
Water pooling around the base of the machine

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Will not drain
Noisy

Do-It-Yourself Stories from Customers like You My front loading washing machine would not drain. Meryl L. • Fort Thomas , AZ • October 26, 2020

So, Saturday, the washer wouldn't drain, yes, I tried the Drain/Spin cycle. So I took the clothes out, rinsed them out twice in the laundry sink and dried them. After a quick Google search, I came to the conclusion that the pump was bad and ordered a pump, $125. Over the course of the next four days, expecting the new pump on Thursday, I baled out the washer, pulled it out from the wall and propped up the front (it's HEAVY), removed the front access panel, removed the drain inlet and outlet... Read more

$152.95

Compare At:: $183.54
You Save:: $30.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Drain Hose

4.9 (34)

By: Whirlpool

Part Number: WPW10545278

The Drain Hose is an OEM part for Whirlpool dishwashers. It is designed to transport wastewater from the dishwasher to the household drain system, ensuring efficient and safe removal of water after each wash cycle. This drain hose is 67” long and includes the check valve.

Symptoms of a bad Drain Hose include:

Water leaking from underneath or behind the dishwasher.
Signs of water damage or mold near the appliance, indicating persistent dampness.
Poor draining performance, with water remaining in the dishwasher after cycles.

Causes of a bad drain hose can include physical damage such as cracks or holes, clogging from food particles or grease, or improper connections that lead to leaks or kinks in the hose.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Jenn airJDB8000AWS3 dishwasher would not drain Lynden B. • Benicia , CA • December 17, 2019

Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more

$48.95

Compare At:: $58.74
You Save:: $9.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Washer Drain Pump

4.9 (28)

By: Whirlpool

Part Number: W10876600

This washer drain pump moves water out of the washer during drain and spin. Replacing a worn or failed pump restores proper draining so cycles finish on time and the basket can reach full spin speed.

What it does

Pumps water from the tub to the household drain during the drain cycle
Helps resolve standing water, slow draining, or humming from a seized pump
Reduces long/aborted cycles caused by incomplete draining
Can stop leaks at the pump body when the housing is cracked

What’s included
One drain pump assembly.

Install notes

Unplug power and turn off water; bail out remaining water before service
Clamp/remove hoses and keep towels handy; transfer any mounting bracket as needed
Inspect and clear the drain hose and tub-to-pump hose before reassembly
Run a drain/spin test to verify proper flow and check for leaks

This OEM drain pump is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Would not drain. Lacy A. • Kill Devil Hills , NC • June 25, 2018

Ordered the correct part/ Pump from this Awesome website and replaced the drain pump. Good to go!! Read more

$100.48

Compare At:: $135.27
You Save:: $34.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Drain Hose

4.9 (52)

By: Whirlpool

Part Number: 8269144A

The Drain Hose is an OEM part for Whirlpool dishwashers. This flexible hose is designed to carry waste water from the dishwasher to the kitchen drain system or garbage disposal, ensuring that the dishwasher drains properly after each wash cycle.

Causes of damage to the Drain Hose often involve regular wear and tear, bending or kinking of the hose during installation or maintenance activities, or deterioration over time due to exposure to hot water and detergents.

Symptoms of a bad Drain Hose include:

Water remaining in the bottom of the dishwasher after a cycle
Leaks found under or behind the dishwasher, which could be due to holes, cracks, or loose connections in the drain hose.
Unpleasant odors emanating from the dishwasher, potentially caused by food particles or debris caught in a hose that is not draining correctly.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Will not drain

$23.95

Compare At:: $28.26
You Save:: $4.31

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Drain Pump

4.9 (49)

By: Whirlpool

Part Number: WPW10276397

The Drain Pump is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer during the drain cycle. It ensures that water is efficiently pumped out of the washing machine, preventing water from remaining in the tub after a wash cycle, which is crucial for the appliance's proper operation and the cleanliness of your laundry.

You should replace the drain pump if it becomes faulty or stops working. Common causes of a bad drain pump include blockages from debris or lint, wear and tear over time, or electrical malfunctions. These issues can prevent the pump from effectively draining water.

Symptoms of a bad drain pump include:

Water not draining from the washing machine
Unusual noises during the drain cycle, such as humming or grinding
The washer stopping mid-cycle with water still in the tub
Error codes related to draining issues on the washer's display

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Washer wouldn't pump water out. Michael M. • Winnebago , MN • March 20, 2014

It was a fast fix. its a Maytag Centennial Top load washer. it took me about 20mins to remove the pump and instal the new one.Most of the time was spent moving the washer. Read more

$94.55

Compare At:: $118.11
You Save:: $23.56

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Washer Drain Pump Assembly

4.9 (226)

By: Whirlpool

Part Number: WP35-6780

The Washer Drain Pump Assembly is an OEM part for Whirlpool washing machines. This component is vital for draining water from the washer drum during the wash and rinse cycles. The pump forces water out of the drum and through the drain hose, ensuring that clothes are cleaned and rinsed effectively.

Symptoms of a failing Washer Drain Pump Assembly include:

Water not draining from the washer, leaving clothes wet
Unusual noises during the drain cycle, such as humming or grinding
Error codes on the washer's display indicating drainage issues
Water leaks from the pump area or from the washer
The washer stopping mid-cycle due to drainage problems

Causes of a bad drain pump assembly can include obstructions from debris, wear and tear on the pump motor over time, electrical issues such as short circuits, or damage from improper installation or usage.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Note: This pump has been redesigned and the mounting plate is no longer required. It now mounts directly to the base of the washer.

This part fixes the following symptoms

Will not drain

Do-It-Yourself Stories from Customers like You The pump on my washing machine went bad William P. • El Paso , TX • April 26, 2014

It was a relatively easy fix. Removed the small access panel at the back of the washing machine after unplugging the unit. The pump is right there. Disconnected the two hoses to the pump, catching some water with towels. Removed three retaining screws, then realized I had not disconnected the belt from under the unit. Easy fix, tilted the unit and disconnected the belt. Put in the new pump , connected the hoses, then reconnected the belts. Works like new! Read more

$74.23

Compare At:: $91.11
You Save:: $16.88

IN STOCK

Ships Monday Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Frigidaire part

Crosley Dishwasher Drain Hose

4.8 (60)

By: Frigidaire

Part Number: 807117001

The Dishwasher Drain Hose is an OEM part for Frigidaire dishwashers. It is crucial for safely channeling waste water from the dishwasher into the drain system, preventing backups and leaks. This flexible hose is designed to withstand the rigors of regular use, including exposure to hot water and detergents, ensuring a reliable path for effluent without risk of damage under normal operating conditions.

Symptoms of a bad Dishwasher Drain Hose include:

Water pooling around the dishwasher,
Signs of leakage at the connection points,
A musty smell indicating standing water in the hose.

Causes of drain hose failure often involve cracks or punctures, which can occur with age or if the hose is improperly installed or subjected to external pressure.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Standing water in the bottom of dishwasher after the load was finished. John W. • Sicklerville , NJ • July 14, 2017

I very seldom respond to requests for feedback like this but definitely feel moved to do so in this case. When our 8 year old dishwasher started acting up my initial reaction was to simply replace it. I wasn't sure what was wrong, nor if I would be able to find the right part once I did figure out the problem. The troubleshooting advice on this website was spot on and I quickly figured out what needed to be replaced. The repair videos were easy to follow and the parts were here two days... Read more

$38.95

Compare At:: $46.35
You Save:: $7.40

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Internal Drain Hose

4.9 (61)

By: Whirlpool

Part Number: WPW10358149

The Internal Drain Hose is an OEM part for Whirlpool washing machines. This hose is responsible for carrying used water from the washer tub to the drain pump, facilitating the efficient removal of water during the drain cycles. It ensures that water is properly directed out of the washer, preventing leaks and maintaining optimal washing performance.

Causes of a bad internal drain hose can include blockages from debris or lint, wear and tear from regular use, or damage such as cracks or splits from mishandling or aging.

Symptoms of a bad internal drain hose include:

Water leaking inside or around the washer
Slow or incomplete draining
Error codes related to draining issues
Unusual noises during the drain cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Water leak Jeff R. • Bryan , TX • September 23, 2014

Replaced internal drain hose. and while I was in there I changed some known wear items. water pump,direct drive coupling tub to pump hose and a spring Read more

$27.95

Compare At:: $33.26
You Save:: $5.31

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Tub To Pump Hose

4.9 (43)

By: Whirlpool

Part Number: 285871

The Tub to Pump Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub assembly to the pump, carrying water drained from the tub into the pump housing. This hose is a component that allows the machine to drain water efficiently during the spin cycle.

Causes of a bad tub to pump hose can include mineral buildup that restricts water flow, fatigue and wearing that cause cracks or splits, damage from rodents or sharp/heavy objects in the wash load, and deterioration from age that increases brittleness.

Symptoms of a bad hose include:

Water leaks during or after the drain cycle
Inability to fully drain water from the tub
Water remaining in the tub after spinning

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Water leak Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

$17.95

Compare At:: $21.36
You Save:: $3.41

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Hose, Outer Drain

5.0 (10)

By: Whirlpool

Part Number: W11244231

The Hose is an OEM replacement part for Whirlpool washing machines. It is a flexible tube responsible for draining and expelling the used water from the washer tub after each wash cycle.

Symptoms of a faulty drain hose include:

Water leaks around the hose connections or along its length
Slow draining or improper drainage of the tub
Visible cracks, bulges, or damage to the hose material

Causes of a bad washer drain hose can include normal wear and tear over time, exposure to high water pressure or temperatures, physical damage from kinks or pinches, or improper installation or connections.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.

Do-It-Yourself Stories from Customers like You Drain hose wasn't long enough Amanda D. • Bound Brook , NJ • August 18, 2015

After not finding the needed parts to extend the hose at home depot, i turned to online help. I was able to find the right parts quickly on your site and was able to even watch a few videos on how to do the repair. I was beyond amazed that the parts arrived the next day, even though a Saturday and even with standard shipping. I was fortunate enough that my repair did not need any real explanation and the job was done in less than 10 minutes. Felt really good to be able to solve the problem,... Read more

$24.95

Compare At:: $29.69
You Save:: $4.74

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance Type

Crosley

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Crosley Cogged Pump Hose Parts

Crosley Whirlpool Direct Drive Washer Pump

Crosley Drain Pump

Crosley Drain Pump

Crosley Dishwasher Food Chopper

Crosley Drain Pump Assembly

Crosley Circulation Pump Motor Kit

Crosley Frigidaire Drain Pump

Crosley Drain Hose

Crosley Washer Drain Pump

Crosley Drain Hose

Crosley Drain Pump

Crosley Washer Drain Pump Assembly

Crosley Dishwasher Drain Hose

Crosley Internal Drain Hose

Crosley Tub To Pump Hose

Crosley Hose, Outer Drain

Appliance Type