Line Chef Small Engine Carburetor Gasket Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 154827601
The Dishwasher Tub Gasket is an OEM replacement part for Frigidaire dishwashers. It seals the gap between the dishwasher tub and the door, preventing water leaks and ensuring efficient operation. This tub gasket is typically made of durable rubber or silicone material, designed to withstand the heat, moisture, and chemicals involved in the dishwashing process
Symptoms of a faulty Dishwasher Tub Gasket include:
- Water leaks around the dishwasher door or base
- Failure to maintain proper water levels during cycles
- Condensation buildup or moisture issues outside the tub area
- Visible cracks, wear, or damage to the gasket material
Causes of a bad tub gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
Leaking from the bottom of the tub door Joseph P. • Palmyra , PA • April 10, 2015
The dishwasher is 4 years old, so I figured since it was leaking from the bottom, replacing the Tub Gasket PN: AP5690109, Splash Shield Kit PN: AP4338941 , and the bottom Door Seal/Gasket PN: AP5809675 was a good idea; the machine probably has around 1200 cycles in 4 years. There's no telling how much the door had opened and closed!? The bottom Door Seal/Gasket was badly worn, and the entire job took me around 30 minutes which included the detailed cleaning of the mating flanges. Take your...
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Ge part
By: Ge
Part Number: WE03X37318
The Dryer Front Bearing Drum Slide (White, 2-Pack) is an OEM replacement part for GE dryers. These slides are located on the front panel of the dryer and work to support the drum as it rotates. The white slides are designed to reduce friction between the drum and the panel, ensuring smooth operation and helping to prolong the life of the appliance.
Over time, these slides can wear out due to constant movement, heat, and friction. When worn or damaged, the drum may not rotate as intended, leading to noise and reduced efficiency.
Symptoms of bad dryer front bearing drum slides include:
- Squeaking or grinding noises during operation
- The drum appearing loose or sagging at the front
- Clothes not drying evenly or taking longer to dry
- Visible wear or thinning on the existing drum slides
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer began to take much longer to dry clothing what once took 30 minutes now took 2 hours Steven M. • Monett , MO • July 10, 2015
We cleaned out all ducts carefully and did other basic troubleshooting but it did not help.
Began to research the problem on-line and discovered that this dryer has two heating elements. One can fail while the other continues to provide heat - but with a large impact on drying time.
Watched youtube videos and how to take apart the dryer to reach the heating coils.
Tested the heating elements for continuity with tester and the outer loop had no continuity indicating it was broken somewhere. ...
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 242193213
The Refrigerator Door Gasket is an OEM part for Frigidaire refrigerators, designed to seal the door of the refrigerator compartment, ensuring an airtight closure. This door gasket plays a crucial role in maintaining the efficiency of the refrigerator by preventing cold air from escaping and warm air from entering.
Common causes for a Refrigerator Door Gasket to fail include normal wear and tear from opening and closing the door, damage from cleaning or misuse, and aging of the material, which can lead to hardening and loss of elasticity.
Symptoms of a bad Refrigerator Door Gasket include:
- Noticeable gaps or tears in the gasket
- The refrigerator door does not close as tightly as it should, or it requires more force to close.
- Condensation or frost buildup around the door edges
- An increase in energy consumption
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Door gasket was torn at botton of refrigerator Rahn T. • Wayne City , IL • October 11, 2014
This door gasket presses into slot around door pull off old and press in new a five minute repair
Read more
More
$125.60
- Compare At:
-
$149.46
- You Save:
-
$23.86
Genuine Ge part
By: Ge
Part Number: WE03X37317
The Dryer Front Bearing Drum Slide (Green, 2-Pack) is an OEM replacement part for GE dryers. These slides are located on the front panel of the dryer and work to support the drum as it rotates. The green slides are designed to reduce friction between the drum and the panel, ensuring smooth operation and helping to prolong the life of the appliance.
Over time, these slides can wear out due to constant movement, heat, and friction. When worn or damaged, the drum may not rotate as intended, leading to noise and reduced efficiency.
Symptoms of bad dryer front bearing drum slides include:
- Squeaking or grinding noises during operation
- The drum appearing loose or sagging at the front
- Clothes not drying evenly or taking longer to dry
- Visible wear or thinning on the existing drum slides
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer began to take much longer to dry clothing what once took 30 minutes now took 2 hours Steven M. • Monett , MO • July 10, 2015
We cleaned out all ducts carefully and did other basic troubleshooting but it did not help.
Began to research the problem on-line and discovered that this dryer has two heating elements. One can fail while the other continues to provide heat - but with a large impact on drying time.
Watched youtube videos and how to take apart the dryer to reach the heating coils.
Tested the heating elements for continuity with tester and the outer loop had no continuity indicating it was broken somewhere. ...
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507199
The Door Gasket is an OEM replacement part for Frigidaire refrigerators. It ensures a tight seal around the door, preventing cold air from escaping and warm air from entering the refrigerator.
Over time, the door gasket may become worn or damaged due to frequent use, accidental tears, or exposure to extreme temperatures. A compromised gasket can lead to increased energy consumption as the refrigerator works harder to maintain its internal temperature, spoiling of food due to improper cooling, and condensation or frost buildup inside the refrigerator or freezer.
Symptoms of a bad Door Gasket include:
- Noticeable gaps around the door
- Difficulty in closing the refrigerator door
- Condensation or frost buildup around the door
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The frost & ice building up inside upright freezer. Jackie R. • De Leon , TX • January 13, 2023
Frost & ice were building up inside the top of our upright freezer, so I replaced the door gasket. First I'll make my long story short, then I'll tell the longer story for those who might be interested and might benefit from my experience.
Short version - The whole project took about three hours, but less than an hour of that would have been required if I were more of a handyman and if the freezer hadn't had prior work done on the door for the same frost buildup problem.
Long version - When...
Read more
More
$116.95
- Compare At:
-
$140.34
- You Save:
-
$23.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 809006501
The Bottom Gasket is an OEM replacement part for Frigidaire dishwashers. It is a critical component that seals the gap between the bottom of the dishwasher tub and the door, preventing water leaks and ensuring efficient operation.
Causes of a bad bottom gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.
Symptoms of a faulty Bottom Gasket include:
- Water leaks around the base of the dishwasher
- Failure to maintain proper water levels during cycles
- Condensation buildup or moisture issues under the dishwasher
- Visible cracks, wear, or damage to the gasket material
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
Leaking from the bottom of the tub door Joseph P. • Palmyra , PA • April 10, 2015
The dishwasher is 4 years old, so I figured since it was leaking from the bottom, replacing the Tub Gasket PN: AP5690109, Splash Shield Kit PN: AP4338941 , and the bottom Door Seal/Gasket PN: AP5809675 was a good idea; the machine probably has around 1200 cycles in 4 years. There's no telling how much the door had opened and closed!? The bottom Door Seal/Gasket was badly worn, and the entire job took me around 30 minutes which included the detailed cleaning of the mating flanges. Take your...
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Ge part
By: Ge
Part Number: WD08X21894
The Lower Door Gasket is an OEM part for GE dishwashers. It is placed at the bottom of the dishwasher door to create a water-tight seal during operation, preventing leaks and ensuring that water remains within the unit during the wash cycle.
Symptoms of a bad Lower Door Gasket include:
- Water leaking from the bottom of the dishwasher door
- Signs of mold or mildew near the gasket area
- Frequent puddles or drips underneath the door after a wash cycle
- The gasket becoming hard, cracked, or visibly damaged
Causes of a bad Lower Door Gasket can include regular wear and tear, exposure to harsh detergents and high temperatures, or improper installation that leads to uneven sealing.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower door gasket on GE dishwasher had deteriorated and come apart. Juan S. • Benton , LA • February 28, 2023
I went to your web sight. I entered the GE dishwasher model # and found the gasket was available. While looking up the needed gasket I happened to see an applicable how-to replace the gasket video and watched it. It was easy to follow and VERY helpful. As I watched, I wrote down the gasket replacement procedure step-by-step. I ordered the needed gasket and received it in 2 days (AMAZING). The replacement entailed disconnecting the water supply, the power supply and the discharge hose. I removed...
Read more
More
$17.95
- Compare At:
-
$21.18
- You Save:
-
$3.23
Genuine Frigidaire part
By: Frigidaire
Part Number: 242193206
The Refrigerator Door Gasket is an OEM replacement part for Frigidaire refrigerators. This crucial component is responsible for creating an airtight seal around the refrigerator door, ensuring efficient temperature control and energy conservation. This gasket is "approximately" 28” by 41”, and may require a screwdriver to remove the old gasket.
Symptoms of needing to replace the refrigerator door gasket include:
- Difficulty in closing the refrigerator door properly
- Visible gaps or gaps around the door gasket area
- Condensation buildup or frost formation around the door gasket
- Increased energy consumption due to inefficient sealing
Causes of a faulty door gasket can include normal wear and tear over time, exposure to extreme temperatures or UV light, or physical damage due to impact or mishandling.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Refrigerator door gasket Robert L. • West Bridgewater , MA • November 24, 2017
Very easy to do.
Read more
More
$125.95
- Compare At:
-
$149.88
- You Save:
-
$23.93
Genuine Whirlpool part
By: Whirlpool
Part Number: W10909089
The Lower Door Seal is an OEM replacement part for Whirlpool dishwashers. This seal runs along the bottom edge of the dishwasher door, creating a tight seal against the tub when closed to contain water inside during cycles. This seal measures approximately 22 inches in length
Causes of lower door seal failure commonly involve repeated compression stresses from opening/closing actions gradually stiffening the flexible gasket material. Drying out and cracking occurs over years of heat exposure as well.
Symptoms of a worn lower door seal include:
- Water leaking out from beneath dishwasher door during cycles
- Difficulty latching door completely from warped seal edges
- Visible cracks, splits or brittleness along the length of the seal
- Gaps allowing water intrusion beneath door perimeter
This versatile OEM part is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
The dishwasher leaking out the bottom of the door. Daniel L. • Boscawen , NH • February 10, 2023
My Whirlpool dishwasher was leaking out the bottom of the door. I replaced the gasket and the lower door seal. When I ran a test wash, it was still leaking. After reading more online, I found that it could be a cracked washer arm. The initial inspection of the washer arm looked normal but when I used my faucet to slowly pour water into the inlet of the arm, I noted that water was leaking through a seam and not just the holes where it should come out. I then tried running a wash without the...
Read more
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10497235
The Lower Door Seal is an OEM replacement part for Whirlpool refrigerators. It plays a crucial role in maintaining the proper seal between the refrigerator door and the cabinet, ensuring energy efficiency and consistent temperature control.
Causes of needing to replace the lower door seal can include normal wear and tear over time, exposure to extreme temperatures or UV light, or physical damage due to impact or mishandling.
Symptoms of a faulty lower door seal include:
- Difficulty in closing the refrigerator door properly
- Visible gaps or gaps around the door seal area
- Condensation buildup or frost formation around the door seal
- Increased energy consumption due to inefficient sealing
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Dishwasher needed a new bottom door seal Daniel F. • Englewood , FL • April 03, 2016
Thanks to Jason and his tech people at Appliance Parts Pro, I was able to remove and replace the seal and eliminate all leaks at the bottom of the door. I have a Kitchenaide (Whirlpool) dishwasher model KUDC10IXBL1. Here is how to replace the bottom door seal.
1) Shut off breaker to dishwasher on the electrical panel.
2) Open the dishwasher door completely, and while supporting the door, remove the hex head screws that hold the outside cover.
2) Close the door carefully and slip the outside...
Read more
More
$10.46
- Compare At:
-
$12.45
- You Save:
-
$1.99
Genuine Ge part
By: Ge
Part Number: WD08X23476
The Tub Gasket is an OEM part for GE dishwashers. It is installed around the perimeter of the dishwasher door to create a water-tight seal during operation, effectively preventing water leaks. This gasket ensures that the dishwasher can maintain the necessary water level and pressure to clean dishes effectively, while also protecting your kitchen from water damage.
Causes of a bad Tub Gasket can include natural wear and tear from regular use, exposure to harsh cleaning chemicals that can degrade the rubber material, or improper installation leading to gaps or loosening.
Symptoms of a bad Tub Gasket include:
- Water leaking from around the dishwasher door
- Signs of mold or mildew on the gasket
- The gasket becoming hard or cracked
- Visible gaps between the gasket and the dishwasher door
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ge dishwasher gdf520pgd2ww leak slow drip from door Kay S. • Madison , AL • July 03, 2016
I ordered door seal and bottom strip seal:
GASKET TUB PLASTIC Number: WD08X22094
GASKET BEACH PLASTIC: WD08X21894
I had done this once previously and removed the door. That was not too bad but trying to put the door back on the hinges by myself was a bit of work. This time I:
1) removed the 2 screws at the bottom of the door.
2) opened the door all the way
3) slowly pulled the door back on the hinges till I could pull out the bottom gasket
4) slid the new gasket back in place
5) pushed the...
Read more
More
$15.38
- Compare At:
-
$18.30
- You Save:
-
$2.92
Genuine Whirlpool part
By: Whirlpool
Part Number: W10830162
Grey for Right Hand Door
The Refrigerator Door Gasket is an OEM replacement part for Whirlpool refrigerators. It creates an seal between the refrigerator doors and the body, helping to maintain proper temperatures inside. The gasket is a soft, pliable material designed to tightlen without allowing air or warm moisture to infiltrate the refrigerator. Measures approximately 39 by 16 inches
Causes of a bad door gasket include cracking, splitting, or compression from repeated opening and closing of the door over time. Deterioration leads to diminished sealing and temperature control performance.
Symptoms of a bad door gasket are:
- Difficulty keeping items cool or frozen
- Frost or moisture buildup between the door and refrigerator body
- Higher energy costs from the refrigerator working overtime
- Food odors transferring between compartments
This OEM Whirlpool gasket is also compatible with Maytag, Jenn-Air, Amana, Norge, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator door gaskets were cracked and moldy Allison O. • Sussex , NJ • June 29, 2019
I bought new gaskets, which were expensive! At least the repair was easy. Pulled out the old ones, pressed in the new ones. Had to redo them because I didn't notice the little flaps that need to be covering the space in the middle, between the doors. So, pulled them off, and turned them around, and pressed them on again. Maybe 10 minutes?
Read more
More
$135.35
- Compare At:
-
$161.07
- You Save:
-
$25.72
Genuine Whirlpool part
By: Whirlpool
Part Number: W10612022
The Felt Drum Seal is an OEM part for Whirlpool dryers. This part creates a tight seal along the edge of the dryer drum, preventing hot air from escaping and ensuring efficient operation. The felt seal helps to minimize noise and vibration during the drying cycle by cushioning the space between the drum and the dryer body.
Over time, the felt drum seal can wear out, become compacted, or tear, leading to potential issues such as increased drying times, higher energy consumption, and excess noise.
Symptoms of a bad Felt Drum Seal include:
- Clothes taking longer to dry
- Unusual noises or increased vibration during operation
- A visible gap between the drum and the dryer body
- Excessive lint buildup inside the dryer beyond the lint trap
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
$40.95
- Compare At:
-
$48.73
- You Save:
-
$7.78
Genuine Frigidaire part
By: Frigidaire
Part Number: 241786013
The Refrigerator Door Gasket is an OEM replacement part for Frigidaire refrigerators. This gasket forms a tight seal around the refrigerator door, keeping cold air inside and preventing warm air from entering. By maintaining an airtight seal, it helps ensure consistent cooling and energy efficiency, preserving food quality.
Over time, gaskets can wear out due to frequent use, temperature changes, or exposure to cleaning chemicals. A damaged or degraded gasket can lose its flexibility or develop cracks, leading to an improper seal that affects the refrigerator's performance.
Symptoms of a bad refrigerator door gasket include:
- Warm spots or uneven cooling inside the refrigerator
- Excess condensation or moisture around the door
- Difficulty in securely closing the refrigerator door
- Increased energy consumption as the appliance works harder to maintain temperatures
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
S or 5 e ce later that changes to s or 5 y ce Amritt V. • Yorkyown , VA • October 21, 2017
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest...
Read more
More
$64.95
- Compare At:
-
$77.55
- You Save:
-
$12.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304500204
The Dishwasher Door Bottom Gasket is an OEM part for Frigidaire dishwashers. This gasket is installed along the bottom of the dishwasher door, ensuring a tight seal to prevent water from leaking out during operation.
Causes of a bad Dishwasher Door Bottom Gasket can include natural degradation over time, exposure to harsh cleaning chemicals that can erode the material, or improper installation leading to uneven wear or tearing.
Symptoms of a bad gasket include:
- Water leaking from the bottom of the door
- Visible wear or damage to the gasket
- Problems with the dishwasher cycle due to water escaping
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking from the front corner of the door Megan D. • Shelbyville , TN • October 14, 2016
A quick google search lead me to the problem - the plastic door gasket had become loose and broken. Received the part very quickly and installed it that night after a little trial and error. What the videos don't tell you is that to properly 'seat' the gasket you need to angle it UP when you push it into the little gap. If you angle it up, it will catch and seat properly, if you just push it in normally, it won't catch on the right part and it'll just hang loose at the bottom of the door and...
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49
Genuine Ge part
By: Ge
Part Number: WE09X27634
The Lower Drum Felt seal is an OEM replacement part for GE dryers. The Lower drum felt seal is responsible for creating a seal between the drum and the front panel of the dryer.
This part fixes the following symptoms:
- Air leaking from the dryer drum
- Reduced dryer efficiency and increased energy costs
- Clothes becoming caught in the gap between the drum and front panel
- Potential damage or snags to clothes or the dryer
Causes of a bad Lower Drum Felt Seal can range from normal wear and tear, which degrades the felt material over time, to excessive load sizes that strain the drum and seal. Additionally, over time, the seal can become compressed or damaged, leading to a less effective seal and the potential for heat loss and inefficiency in the drying process.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Loud squeaking noise from front top area of ge dryer as drum turned Christopher S. • Closter , NJ • July 12, 2016
Found the entire top bearing support plastic piece was completely worn through, the bearing slides had all disappeared some time ago. So it was obviously the problem. The felt trap duct (which is actually a drum seal along bottom front of drum so I don't know why they call it felt trap duct) had also disappeared, so a lot of lint was getting inside the front panel too. It's a very easy repair to change the bearing support; everything just pops out just like the video shows. Make sure you...
Read more
More
$24.29
- Compare At:
-
$28.66
- You Save:
-
$4.37