Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker producing broken cubes or leaking? The ice cube tray often cracks over time. Simple DIY repair—remove 2 screws, unplug, and replace. Video guide.
The amount of water being dispensed into the ice cube tray was excessive, causing overflow of the tray. The water then ran into the collection bin and even down the side walls of the freezer creating a huge block of ice in the bin, and ice all over the lower shelves as well. The excessive build up of ice caused the cube tray to crack and also split the little silicone water grommet that connects to the water delivery tube which directs water into the cube tray. Look out for that little tube... Read more
Plastic cover that protects the ice maker temperature sensor. Replaces broken, cracked, or missing covers to secure the sensor wire and foam insulation.
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket... Read more
Freezer won't cool below 50°F or has frost buildup? This defrost sensor regulates temperature readings. Moderate DIY repair for most home models.
Sensor near coils replaced did not need anything else. Read more
If your refrigerator won't cool properly or freezes food, the temperature sensor may be faulty. Moderately easy DIY repair with our video guide.
Customers temp sensor and defrost heater went out in his fridge and we replaced both parts bought thru yall and it works great. another satisfied customer. were completely satisfied with your products. we only use yall :) Read more
Fixing frost buildup in your freezer? This defrost thermostat regulates defrost cycles to prevent ice accumulation. Common DIY repair, takes 30-45 minutes.
I found freezer thermal link was open and not closing when cold. Replacement fixed problem. Read more
Refrigerator not cooling or making noise? A failed fan motor stops airflow, causing warm temps and ice buildup. Moderate DIY repair with multimeter testing.
Ordered the two motors plus ordered the fan blades since I was afraid one might break during replacement. Changed out without breaking Freezer and both ice makers now working fine Read more
Illuminates appliance interior. Replace when burned out or dimming. Verify wattage and base type match your model before ordering. Easy DIY fix.
Dropped light panel by removing two screws with socket set. Unplugged two terminals and unclipped the light socket from the base. Then just clipped the new socket onto the base, plugged the connectors onto the terminals and remounted the base. Total job was less than 15 minutes. Read more
Ice maker producing clumped cubes or ice sheets? The temperature sensor bracket ensures proper ice formation. Simple DIY fix with video guide available.
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
If your refrigerator runs hot, makes squealing noises, or isn't cooling properly, the condenser fan motor may have failed. DIY repair in 15 minutes.
I bought new parts, motor and fan. Replace the old one. Took me no more than 15 minutes to fix it. Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
No water or ice from dispenser? Leaking water? This water inlet valve controls water flow to your dispenser and ice maker. DIY-friendly, 10-15 min install.
I have a Samsung fridge and I had a problem were low pressure water kept coming out of the dispenser and would not stop. At first I thought it was the dispenser switch until I read reviews on the App Pro sight and the issue pointed to the water valve. I ordered the part from App Pro (very quick delivery) installed the new water valve in 15 minutes. Turned water back on plugged fridge back in wall and problem solved. Water dispenser working normally. (part DA62-00914B) Read more
Ice maker not dumping ice or overflowing? This assembly fixes rotation and release issues. DIY-friendly installation takes about 10-15 minutes.
I replaced the ice maker assembly was pretty simple process Applianceparts made it easy and even told me they would take the part back if it wasn't the problem. Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Fixes ice maker not producing ice, freezing over, or leaking water into freezer. Direct replacement assembly restores ice production. 5-10 minute DIY repair.
I ordered a complete ice maker from appliance parts after watching a few YouTube videos I was sure that I could replace the icemaker. Upon the arrival of the icemaker I removed two screws slid the icemaker out disconnected the wiring harness and replace the icemaker in less than five minutes. I estimate I saved between 150 and $200 and service fees. Very Happy. Howard from Sparks, Nevada Read more