Tank For Ce Line Mover V-Belt Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392067
Silence the squeaks and keep laundry moving - upgrade your dryer with the Whirlpool 4392067 OEM Repair Kit.
Why choose this kit?
- All-in-one fix: OEM belt 661570V, 4 heavy-duty rollers WPW10314173, idler pulley 279640, tri-rings & washer - everything factory-fresh in one box.
- Wide compatibility: Fits 27" Whirlpool-family dryers—Cabrio, Duet, Bravos XL, Thin Twin, Kenmore 110-series, Maytag, Roper, Estate & more.
- Pro-grade durability: Roller bearings & reinforced belt deliver whisper-quiet tumbling and longer service life.
Fixes these common dryer problems
| Problem |
How the kit solves it |
| Loud squeaking / thumping |
Worn rollers or idler pulley replaced |
| Drum won’t turn |
Broken or stretched belt replaced |
| Extended dry times |
Restores proper drum speed & airflow |
| Burning-rubber smell |
New belt & pulley eliminate slippage |
DIY install in about 45 minutes
- Unplug dryer and remove front panel.
- Lift drum to release belt; remove old rollers & idler.
- Install new rollers, pulley & belt following the routing diagram.
- Re-assemble, run test cycle - enjoy quiet, smooth tumbling.
Note: Belt may differ from your dryer's model—Double-check compatibility before purchase.
Do-It-Yourself Stories from Customers like You
Very loud squeak inside whirlpool duet sport dryer model wed8300sw0 Steve W. • Boone , NC • September 27, 2014
Our Whirlpool Duet Sport Dryer, 6.7 cu. ft, Model WED8300SW0, bought new 8 years ago (2006), developed a VERY loud squeaking noise inside the dryer. Removing the top panel did not isolate the problem. I researched the problem and through the videos appearing on Appliance Parts Pros (APP) website and a few others, determined that the problem was either the drum belt, one or more of the 4 drum support rollers, or idler pulley or any combination of these. I ordered the kit to allow for...
Read more
More
$37.65
- Compare At:
-
$47.83
- You Save:
-
$10.18
Genuine Whirlpool part
By: Whirlpool
Part Number: 341241
Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.
Why this belt?
- Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
- Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
- Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.
Fixes these common dryer problems
| Problem |
How the belt solves it |
| Drum won’t turn |
Transfers motor rotation to drum |
| Loud squealing / thumping |
Replaces stretched or frayed belt |
| Burning-rubber smell |
New belt stops slippage & heat build-up |
| Damp clothes / long cycles |
Restores correct drum speed & airflow |
DIY install — about 15 minutes
- Unplug dryer; remove lint screen housing & front panel.
- Release belt tension at idler pulley; lift drum slightly to slide old belt off.
- Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
- Re-assemble, run test cycle - enjoy quiet, consistent tumbling.
This part fixes the following symptoms
-
Heat stays on after drum has stopped
-
Will not tumble
-
Touchpad does not respond
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Broken dryer belt Bob B. • St Louis , MO • September 12, 2015
Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back...
Read more
More
$14.64
- Compare At:
-
$17.42
- You Save:
-
$2.78
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392065
The Dryer Repair Kit is an OEM replacement part for Whirlpool 29-inch large capacity dryer models. It is a kit designed to provide various essential components and hardware needed for common dryer repairs or maintenance tasks.
The kit includes:
Please note: Some parts in this kit may not fit your specific model. Use your model number to check for your specific parts.
Causes of needing a dryer repair kit can include worn-out or damaged components due to normal wear and tear, accidental impact or mishandling, or maintenance requirements after a certain period of use.
Symptoms that may indicate the need for a dryer repair kit include:
- Excessive noise or vibrations during operation
- Difficulty in opening or closing the dryer door
- Clothes becoming tangled or wrapped around the drum
- Leaks or air drafts affecting drying performance
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
This part fixes the following symptoms
-
Will not tumble
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer belt burned up due to wedged sneaker Benjamin E. • Marietta , GA • September 30, 2014
I was out of the country when the damage occurred but based on my wife's description I knew what had happened. Upon returning to the 1st World, i verified a totally free-spinning drum and ordered a full rebuild kit (rollers, belt & idler). The instruction video was very helpful - especially in listing every single tool needed so i only made one trip to the workshop and brought up exactly what i needed, the first time. Everything went pretty much according to the instructions except that...
Read more
More
$34.49
- Compare At:
-
$48.30
- You Save:
-
$13.81
Genuine Ge part
By: Ge
Part Number: WE03X29897
The Belt Drive is an OEM replacement part for GE dryers. It is responsible for transferring power from the motor to the drum. A bad belt drive can be caused by normal wear and tear over time, as well as excessive load or strain on the dryer drum.
Symptoms of a bad belt drive include:
- The dryer drum not spinning or rotating.
- Unusual noises coming from the dryer during operation.
- The drum not tumbling smoothly or consistently.
- The belt appearing frayed, cracked, or broken.
Causes of a faulty Belt Drive can include normal wear and tear over time, excessive tension or stretching, or physical damage from improper installation or foreign objects.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Broken drum drive belt Bourque, N. • Rosenberg , TX • October 31, 2016
First, I did a search based on the problem I had with my model of dryer. The model number was on the door frame and was visible when I opened the dryer door. The problem was, when I pressed the button to start a dryer cycle, I heard a clicking noise and the indicator text changed to "Drying", but I could not hear or see the dryer drum turning. The search led me to a page that indicated my problem was usually one of 3 common causes. 1. Faulty door switch 2. Broken Drum drive belt 3. burned out...
Read more
More
$39.52
- Compare At:
-
$46.63
- You Save:
-
$7.11
Genuine Samsung part
By: Samsung
Part Number: 6602-001655
The Dryer Drum Drive Belt is essential for maintaining the smooth and efficient operation of your Samsung dryer. This genuine OEM part ensures reliable performance by providing consistent drum rotation, which helps in evenly drying your clothes and reducing overall drying time. Crafted from high-quality materials, this belt is built to withstand the demands of regular use, minimizing the risk of breakage and extending the lifespan of your appliance. Compatible with a wide range of Samsung dryer models, the Dryer Drum Drive Belt offers a perfect fit and straightforward installation, making it an ideal choice for both DIY enthusiasts and professional technicians. By choosing this genuine OEM part, you can be confident in achieving optimal functionality and restoring your dryer to like-new condition. Enhance your dryerGÇÖs performance and enjoy the benefits of efficient, quiet drying with this reliable Dryer Drum Drive Belt.
Do-It-Yourself Stories from Customers like You
The idler wheel bearings were shot and the dryer was making high pitch squeaks because of it Douglas S. • Kennesaw , GA • March 06, 2016
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be...
Read more
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 134503600
The Dryer Drum Belt is an OEM replacement part designed for use with Frigidaire dryers. This critical component is responsible for turning the drum of your dryer, allowing your clothes to tumble freely and dry evenly.
Causes of a bad Dryer Drum Belt can include wear and tear from regular use, overloading the dryer, which puts extra strain on the belt, or exposure to excessive heat, which can cause the belt to become brittle and break.
Symptoms of a bad Dryer Drum Belt include:
- The dryer motor running but the drum not turning
- Unusual noises, such as thumping or squealing, coming from the dryer when it is running
- The dryer not starting at all, in some cases
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring a wide range of users can benefit from its reliable operation.
NOTE: Please note that this dryer drum belt is sold individually. Any additional parts or hardware will require additional purchases.
Do-It-Yourself Stories from Customers like You
After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing.
I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation.
I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years...
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Whirlpool part
By: Whirlpool
Part Number: 661570V
The Drive Belt is an OEM replacement part for Whirlpool dryers. This essential component is responsible for transferring power from the dryer's motor to the drum, allowing it to spin and tumble the clothes during the drying cycle.
Symptoms of needing to replace the drive belt include:
- The dryer drum not spinning or rotating
- Loud squeaking or grinding noises during the drying cycle
- Excessive vibration or shaking from the dryer
- Clothes taking longer to dry or remaining damp
Causes of a faulty drive belt can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or mishandling.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
I had no error code, it is just that when you press start you would hear a click and no actions. Nicholas M. • Miami , FL • June 12, 2020
It was the day of my birthday June 6th when my wife came to me to tell me that the dryer was not working. Immediately I started to look for a new dryer from Best Buy and the rest. Then I said It would be better if I waited for 4th of July at which time I could find a better deal. This is when I decided to take it apart to see what was wrong. Initially, I thought of the belt that could be broken and I rotated the drum by hand and I heard a noise of the belt at times falling on the drum. I was...
Read more
More
$39.29
- Compare At:
-
$47.15
- You Save:
-
$7.86
Genuine Lg part
By: Lg
Part Number: 4400EL2001F
The Belt is an OEM replacement part for LG dryers that is responsible for connecting the motor to the drum to allow it to tumble. Over time, dryer belts can stretch, wear out, or even break, leading to a drum that won't turn and clothes that don't dry properly.
Symptoms of a bad Dryer Belt include:
- The dryer motor running but the drum not turning.
- A squealing or thumping noise coming from the dryer.
- The dryer not starting at all.
Causes of failure can include regular wear and tear from the dryer's operation, overloading the dryer beyond its capacity, which puts extra strain on the belt, or a misalignment that causes uneven wear. A damaged belt can prevent your dryer from functioning correctly, leading to inefficiency in drying clothes and potential motor damage due to unnecessary strain.
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Lg dryer dle5799b would start shutting down while drying after cooling down for a while it would start again and shut down after a few minutes; smelled like it was overheating Robert N. • Issaquah , WA • March 12, 2016
I disassembled/reassembled the dryer according to the ApplianceParts Youtube video. With my limited electrical knowledge (just enough to be dangerous) I initially figured it was a problem with the heating unit, sensor(s), or the control board. After diagnosing the problem (bad thermistor), I had to order the parts and was able to repair and reassemble the dryer several days later. After removing the drum, I cleaned all the dust etc. out of the inside (it gets dirty in there!) and inspected,...
Read more
More
$33.44
- Compare At:
-
$39.79
- You Save:
-
$6.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002535
The Dryer Drum Belt is an OEM replacement part for Whirlpool electric dryers. This belt rotates the tumbling drum to fluff and dry clothing loads efficiently. Continuous, uninterrupted drum movement is necessary for effective drying performance. This high-quality belt features 4 grooves and 5 ribs, with a width of 5/16" and a length of 91 5/8".
Causes of a faulty belt include breakage from age, cracks developing as rubber dries out, or slipping off the pulleys due to looseness or worn grooves.
Symptoms of a bad dryer belt include:
- Drum fails to turn or rotates slowly during cycles
- Loud squealing, screeching noises originating from inside
- Smoky smells from belt slipping against fast-turning pulleys
- Possible jolts, jerks or prevented operation of dryer
This belt is also compatible with KitchenAid, Maytag and Jenn-Air models too.
Do-It-Yourself Stories from Customers like You
Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015
I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things...
Read more
More
$25.95
- Compare At:
-
$30.88
- You Save:
-
$4.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY312959
The Dryer Drum Belt is an OEM replacement part for Whirlpool dryers. It is a crucial component that connects the dryer's motor to the drum, allowing the drum to rotate and tumble the clothes during the drying cycle.
Symptoms of needing to replace the dryer drum belt include:
- The dryer drum not spinning or rotating
- Loud squeaking or grinding noises during the drying cycle
- Excessive vibration or shaking from the dryer
- Clothes taking longer to dry or remaining damp
Causes of a faulty drum belt can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or mishandling.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
Dryer belt broke from over 30 years of wear in a maytag Keith K. • Phoenix , AZ • October 18, 2014
I watched your initial video which gave me some insight into the repair. I removed power from the dryer and positioned it for maintenance. Since my dryer was a Maytag, I needed to remove to two front bottom Phillips screws from the front panel of the dryer prior to pulling the panel and door assy. from the unit. The top of the dryer now needs to be removed. Two screws, one on each side holds the top of the dryer in place accessible from within and under the top of the dryer. Once those two...
Read more
More
$24.95
- Compare At:
-
$32.19
- You Save:
-
$7.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP40111201
The Belt is an OEM replacement part for Whirlpool dryers that is responsible for connecting the motor to the drum to allow it to tumble. Over time, dryer belts can stretch, wear out, or even break, leading to a drum that won't turn and clothes that don't dry properly. Length: 93 3/8" Width: 3/8" has 5 ridges.
Symptoms of a bad Dryer Belt include:
- The dryer motor running but the drum not turning.
- A squealing or thumping noise coming from the dryer.
- The dryer not starting at all.
Causes of failure can include regular wear and tear from the dryer's operation, overloading the dryer beyond its capacity, which puts extra strain on the belt, or a misalignment that causes uneven wear.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
The dyer belt and dryer belt tension pulley needed to be replaced Freddrick G. • Lawrenceville , GA • July 30, 2015
I went to the local Home Depot and Lowes, but they did not have the parts because they do not carry parts for the items they actually sell to people. Jumped on the phone and did a quick search for parts and came across appliancepartspros.com. I put in the make and model of my dryer and all the parts for the dryer where listed. I ordered the items on a Wednesday night. I opted for the two day shipping. I thought the items would be at my house by Friday but they did not arrive until Monday. I...
Read more
More
$14.64
- Compare At:
-
$25.35
- You Save:
-
$10.71
Genuine Ge part
By: Ge
Part Number: WE12X10014
The Dryer Drive Belt is an OEM part for GE dryers that connects the motor to the drum, allowing the drum to rotate during the drying cycle. The belt measures approximately 87 inches long and 0.25 inches wide, with 4 ribs.
Over time, the Dryer Drive Belt can wear out or break, leading to the drum not turning.
Symptoms of a bad Dryer Drive Belt include:
- The drum not spinning or rotating
- A squealing or thumping noise coming from the dryer
- The dryer stopping unexpectedly during a cycle
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Will not tumble
-
Won't start
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016
My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ...
Read more
More
$15.38
- Compare At:
-
$27.08
- You Save:
-
$11.70
Genuine Ge part
By: Ge
Part Number: WR17X11440
The Water Tank Assembly is an OEM part for GE refrigerators, designed to store and chill water before it's dispensed through the refrigerator's water dispenser. This integral component ensures that you have immediate access to cold, fresh water without the need to open the refrigerator, helping to conserve energy and maintain the internal temperature.
Over time, the water tank assembly can experience issues such as leaks, cracks, or the buildup of contaminants, all of which can affect the quality and taste of your water.
Symptoms of a bad Water Tank Assembly include:
- Leaks or puddling water beneath the refrigerator
- A noticeable drop in water flow from the dispenser
- Unpleasant taste or odor in the dispensed water
- Visible cracks or damage to the tank or its connections
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Water tank leak Gordon T. • Jonesboro , AR • January 27, 2017
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a...
Read more
More
$42.34
- Compare At:
-
$50.81
- You Save:
-
$8.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 134719300
The Drive Belt is an OEM replacement part for Frigidaire dryers. It plays a crucial role in transferring the rotational motion from the dryer's motor to the drum, enabling the tumbling action necessary for drying clothes.
Symptoms of a need to replace the drive belt include:
- The dryer drum not turning or rotating during cycles
- Loud thumping or squeaking noises coming from the dryer
- Visible wear, cracks, or fraying on the existing belt
Causes of a faulty drive belt can include general wear and tear over extended use, exposure to high temperatures or lint buildup, physical damage from foreign objects, or manufacturing defects in the belt material or construction.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
Noisy electric dryer on startup John B. • Wenatchee , WA • January 29, 2018
Disassembled dryer. Installed new belt, drum rollers, idler arm and blower.
Read more
More
$53.72
- Compare At:
-
$63.93
- You Save:
-
$10.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10198086
The Belt is an OEM replacement part for Whirlpool dryers. This belt wraps around the drum, motor pulley, and idler pulley, allowing the drum to rotate smoothly during the drying cycle.
Over time, the belt can wear out or break due to regular use, friction, or exposure to heat. Physical damage, overloading the dryer, or improper installation can also contribute to belt failure.
Symptoms of a bad belt include:
- The dryer drum not spinning
- A squealing or thumping noise during operation
- The dryer starting but stopping shortly after
- The motor running, but the drum remaining stationary
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The belt broke Joel V. • Delano , CA • April 23, 2014
I end up take the top and front lid of the dryer in order to gain access to the drum, belt, and motor.
i put the belt on and closed it all back up again.
Read more
More
$50.24
- Compare At:
-
$59.28
- You Save:
-
$9.04
Genuine Speedqueen part
By: Speedqueen
Part Number: D511255P
The Dryer Cylinder Belt is an OEM replacement part for Speed Queen dryers. It is a critical component that transmits the rotational force from the drive motor to the dryer drum, enabling it to spin during the drying cycle. This drum belt is approximately 99" long. This drum belt is flat and has 5 ribs and 4 grooves.
Symptoms of a faulty dryer cylinder belt include:
- The dryer drum not rotating or rotating intermittently
- Squeaking or grinding noises during operation
- Visible wear, cracks, or fraying on the belt
Causes of a bad cylinder belt can include normal wear and tear over time, exposure to high temperatures, misalignment or improper tracking, or physical damage from foreign objects or debris.
This OEM Speed Queen part helps maintain optimal washing performance on standard, heavy-duty, and commercial machines.
Do-It-Yourself Stories from Customers like You
Broken dryer belt Joshua L. • Glen Allen , VA • June 11, 2014
Third try was a charm!!!!
Read more
More
$54.28
- Compare At:
-
$65.14
- You Save:
-
$10.86