Diffuser Parts

Remove upper and lower baskets for access. Remove 4 Torx screws holding drain/filter assembly, accessing last screw by rotating the water duct clockwise. Be sure to first un-clip the water duct at top and rear of dishwasher so that it can be moved. (Take the opportunity to remove accumulated deposits behind the water duct). Remove the drain/filter assembly and then remove the single screw holding the food chopper housing. Then remove the chopper assembly which is likely to be in pieces if it... Read more

The dishwasher is 4 years old, so I figured since it was leaking from the bottom, replacing the Tub Gasket PN: AP5690109, Splash Shield Kit PN: AP4338941 , and the bottom Door Seal/Gasket PN: AP5809675 was a good idea; the machine probably has around 1200 cycles in 4 years. There's no telling how much the door had opened and closed!? The bottom Door Seal/Gasket was badly worn, and the entire job took me around 30 minutes which included the detailed cleaning of the mating flanges. Take your... Read more

First, I paid for two-day shipping, but the part arrived the day after I ordered. Awesome service!! For reference, I am a 28-year-old female with little repair experience (though I'd consider myself pretty handy in general and able to figure out most things in life - not a damsel in distress.) This was a relatively easy fix once you figure out how to take down the motor housing, unsure of correct terminology, hard to find a diagram out there that provides a name for all of the parts, where the... Read more

• Noisy
• Will not drain

I had previously disassemble the pump assembly to find what I at first thought was an oddly shaped spring, which it was. What I learned by researching the parts was that the spring's odd shape was a result of something having gotten caught in the pump and jamming the impeller. After ordering the parts, I watched the "repair video" a few time and proceeded to remove and replaced the affected parts. Reassembly went pretty much as described with the one small glitch being the seating of the new... Read more

Replaced the damper control. It took only 10-15 minutes. Since replacement, the clicking noise has stopped. Very happy with the result. However, want to share that there was probably nothing wrong with the original damper other than the original faulty design. The flap opens and closes and believe the clicking noise was the result of plastic against plastic. Noticed the new damper control is exactly the same as the original except that one of the flap sides now has a thick piece of rubbery... Read more

After watching several YouTube videos on similar problem, I decided to replaced the air diffuser. Read more

• Fridge too warm
• Noisy

I determined that the motor that drives the damper valve that allows cold air into the refer was noisy. I ordered the replacement part from AppliancePartsPro.com. It arrived within 3 days and I changed the units out, which took about 10 minutes total. All is quiet with the refer now. Read more

Ordered new insulation from AppliancePartsPros. It was delivered quickly and easy to install. Read more

I went on line and read your advice page. Based on that, I removed the damper assembly (six screws counting the miserable light fixture) and found the damper door broken as predicted. I went back to your page and ordered the new part. Nice breakdown to get number. After that, I disassembled the damper assembly, found that the ABS plastic damper had broken from the actuator probably as a result of fatigue from cycling back and forth for twelve years. I used super glue to re-attach the damper... Read more

My dishwasher quit cleaning dishes and lost all pressure. The food screen would keep clogging up and I would have to take it out and clean it by hand. After putting a new impeller in, the "gears" on the impeller connected with the screen blades, the old impeller the "gears" were stripped off. And the new impeller comes with new seals, after taking old one out I noticed it wasn't long before my old seals would have started leaking. Very simple repair if you watch the great video that... Read more

I started by removing and cleaning the sump filter and drain adapter at the bottom of the tub. The manual said nothing about these filters, but they were almost completely clogged after 5 years of use and no cleaning. After reassembling with the cleaned filters, the problem persisted. I did some more research and found others said the food chopper had disintegrated and caused the same issue with the top rack not getting cleaned. I then pulled the dishwasher out and tipped it on its door to... Read more

I replaced the thermistor and the damper control. I couldn't have done it without the videos showing me how to get stuff apart Read more

Replaced fan motor in fresh food section, easiest repair I have ever made, took longer to get shelves out than replacing motor.. Read more

• Fridge too cold
• Fridge too warm

The site came up on a Google search suggesting a new air diffuser which was indeed the problem. I got a thermistor too just in case but probably want needed. Saved a fortune compared to a repair man and was able to cancel an order I had for a new unit saving over $1200+! Very happy with the whole process and videos on you tube etc. Great site! Thanks! Read more

The video made this repair simple and quick. Quick shipping too. Thank you!! Read more

The evaporator fan had stopped working and caused the entire area around it to ice up. No air flow was getting from the freezer to the fridge. I replaced the damper control (it was rusted, not sure if it was workign or not) and the evaporator fan. It was a very quick repair once I diagnosed the problem. The most time consuming part was taking all the compartments apart to get to the affected area. Read more