Ge Dishwasher Control Top Parts

The Main Control Board Kit is an OEM part for GE dishwashers. This electronic control board manages various dishwasher functions, including water intake, temperature settings, wash cycles, and drying times. It's the brain behind the efficient operation of your dishwasher, ensuring that all components work in harmony for optimal cleaning results.

The primary causes of control board failure often involve power surges, moisture damage, or component wear and tear, which can disrupt the electrical pathways and circuits within the board.  

Symptoms of a bad Main Control Board include:

• Dishwasher failing to start or stopping mid-cycle
• Unusual error codes displayed on the dishwasher panel
• Non-responsive controls or settings that don’t change appropriately

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This middle spray arm hub secures the dishwasher's middle spray arm to the feed tube and lets it spin smoothly, helping deliver even spray coverage so dishes in the upper rack area get properly cleaned.

• Connects the middle spray arm to the water feed/manifold and serves as its rotating center
• Keeps the arm aligned so jets can distribute water evenly
• Wear or cracks can cause the arm to wobble, fall off, bind, or stop spinning
• Symptoms include poor cleaning on the upper rack and unusual noise from the arm area

• Disconnect power and water supply before servicing
• Remove the middle spray arm per your model's design and note its orientation
• Transfer and reuse any original screws, clips, or washers; install the new hub without overtightening
• Spin the arm by hand to ensure free movement before running a brief test cycle

This dishwasher control module assembly is the appliance's electronic brain, directing cycle timing and power to the motor, pumps, water valve, and heater. Replace it to restore proper operation when cycles won't start, advance, or the controls are unresponsive.

• Manages cycle timing and coordinates wash, rinse, drain, and dry operations
• Distributes power to key components based on inputs from the user interface and sensors
• Helps resolve issues such as no start/no response, cycles that won't advance or complete, or recurring error codes/beeping
• Restores consistent control of wash performance and cycle sequencing

• Disconnect power at the breaker or unplug the dishwasher before servicing
• Handle the board by the edges and use ESD precautions; avoid touching components
• Move wiring harnesses over one connector at a time to match positions on the new module
• After installation, restore power and run a test/service cycle or control reset per your model's tech sheet

This part is a tactile control assembly kit that is used on a dishwasher. The tactile control assembly is the system that uses touch to make adjustments. For example, the buttons are connected to this tactile control assembly, and when the buttons are pressed, it is activated. A new tactile control assembly kit may be needed if the dishwasher keypad is entirely unresponsive when the buttons are pressed. If this is the case, the dishwasher will not be able to be used at all. The replacement process is relatively easy and takes anywhere from 30 to 60 minutes to complete. A screwdriver will be needed for the replacement.This tactile control assembly is a genuine General Electric part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific tactile control assembly is compatible with dishwashers that are manufactured by the General Electric brand.

This dishwasher timer controls the timing and sequence of wash, rinse, drain, and dry operations. Replacing a failed timer ensures the machine advances through each stage properly for complete cycles and reliable cleaning results.

• Advances the cycle and routes power to pumps, valves, and heater at the correct times
• Can cause cycles to run unusually long/short or skip steps when failing
• Intermittent start/stop behavior during a cycle can also indicate a worn timer

• Disconnect power at the breaker before servicing
• Access the control console; document wire locations and transfer one lead at a time to the new timer
• Mount securely and route wires clear of sharp edges or moving parts
• Restore power and run a short test cycle to proper advancement

This electronic control module replaces the oven/range control board that manages user inputs, timers/clock and heating cycles so the appliance responds correctly and restores control functions. What it does:

• Receives inputs from the front console and controls bake, broil, timers and display functions
• Regulates oven cycles and relays commands to power components (elements, ignitors, fans)
• Common symptoms of failure: unresponsive touchpad/controls, blank or erratic display, oven not heating or not following selected cycles
• Replacing a faulty module often resolves intermittent operation and control-related error codes

• Disconnect power to the appliance before starting any service to avoid shock or injury
• Access typically requires removing the console or control panel; handle the board and connectors carefully
• Avoid touching circuitry or terminals; ground yourself to reduce static risk
• Follow the appliance service manual and wiring diagrams

The Timer is an OEM part for GE dishwashers. It regulates the various cycles of the dishwasher, such as washing, rinsing, and drying, ensuring each phase occurs for the appropriate amount of time.

Causes of a bad timer can include electrical failures, wear and tear over time, or mechanical issues that disrupt the timer's ability to accurately control the dishwasher's cycles. A malfunctioning timer can result in incomplete washing or rinsing, affecting the dishwasher's overall performance.

Symptoms of a bad timer include:

• Dishwasher cycles running too long or too short
• Dishwasher not advancing to the next cycle
• Dishwasher stopping mid-cycle
• Inconsistent cleaning results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement main control board and tactile board kit restores control and user input when the original electronics or buttons become unresponsive, helping return oven/range controls and display responsiveness. What it does:

• Primary control board: manages the appliance's electronic control functions and communicates with the user interface.
• Tactile board: provides the button interface so touch or press inputs register with the control module.
• Common symptoms addressed: unresponsive or intermittent buttons, unresponsive or blank display, or controls that do not respond reliably.
• Replaces both the main module and its associated keypad in one kit for a matched repair.

• Disconnect power at the breaker before starting any repair to avoid shock or injury.
• Handle circuit boards by the edges and avoid static discharge; use an ESD strap if available.
• Replacement typically requires removing the control panel and unplugging/reconnecting wiring harnesses; keep track of connector locations.

This kit replaces both of the dishwasher's primary electronic controls: the main control board and the tactile board. Replacing them together can restore reliable cycle selection and overall operation when control failures occur. What it does

• Main control board directs cycle logic and powers pumps, valves, heater, and sensors
• Tactile board registers button presses and communicates selections to the main control
• Can address erratic lights/tones or cycles that won't advance due to control faults

• 1 main electronic control board and 1 tactile board

• Disconnect power at the breaker before servicing
• Use ESD protection and handle boards by the edges
• Photograph wiring; transfer one connector at a time to the new board
• Fully seat all ribbon/plug connectors; match any jumper/DIP settings to the original if present

Electromechanical timer that controls a dryer's cycle selection and timing, restoring correct cycle progression and automatic shutoff. Ideal when cycles won't advance or the dryer runs irregularly. What it does:

• Advances the dryer through selected cycles and signals timed shutoff.
• Replaces a faulty timer that prevents cycle selection or stops cycles from advancing.
• Can resolve symptoms like dryer not advancing through cycles, running continuously, or failing to start selected cycles.
• Works with the dryer's control circuitry to coordinate timed and automatic functions.

• Disconnect power at the breaker or unplug the appliance before starting any repair.
• Remove the control panel to access the timer; keep track of mounting screws and wire locations.
• Transfer wires exactly as removed; take a photo before disconnection to aid reassembly.

The Timer regulates the sequence and duration of dishwasher cycles. It advances power to each component in order so the machine washes, drains, and dries at the correct times for dependable operation.

• Controls and advances the dishwasher through each programmed step
• Routes power to the fill valve, wash motor, drain pump, and heater in sequence
• Failure can cause the cycle not to start or advance, to stop mid-cycle, or to run too long
• Intermittent contacts may lead to skipped steps or inconsistent drying/heating

• Disconnect power at the breaker before servicing
• Access the control/console area; remove the knob and mounting hardware as needed
• Label or photograph wire positions; transfer wires to the new timer one at a time
• Mount securely, reassemble panels, restore power, and run a test cycle

The control module assembly is the dishwasher's electronic brain. It manages cycle timing and powers key loads so the unit starts, runs, and completes wash and dry functions reliably when the original board fails. What it does

• Controls cycle timing and distributes power to the wash motor, drain pump, heater, and water inlet valve
• Interfaces with the door latch and user keypad to start/stop cycles
• Monitors inputs to manage heating and drying functions
• Replacement may help if the dishwasher is dead/no lights, won't start, stops mid-cycle, or runs erratically
• May also address intermittent beeping or error indications traced to a failed control

• 1 control module assembly

• Disconnect power at the breaker before servicing; verify no voltage is present
• This is an ESD-sensitive board—use anti-static precautions and handle by the edges
• Access location varies by model; label/photograph wiring and move connectors one at a time
• After installation, ensure all connectors are fully seated and run a test cycle to confirm operation

A replacement electronic control module that manages the appliance's cycle functions and user commands, restoring reliable control and timing when the original module fails. Replaces a faulty control assembly to help return normal operation. What it does:

• Controls cycle timing, power distribution, and signals between sensors and the user interface.
• Replaces a failing control when the appliance won't start, is unresponsive to button presses, or stops mid-cycle.
• Works as the central command board that interprets inputs and runs programmed cycles.

• 1 Module control assembly

• Disconnect power (and water supply for washers) before attempting any repair.
• Handle the board by its edges and avoid touching components; use anti-static precautions if available.
• Reconnect all wiring harnesses and secure mounting hardware before restoring power.

This rotary timer controls the sequence and length of dryer cycles so your machine advances through timed heating, cool-down, and drum-turn stages. It restores reliable cycle progression and timing when the original timer fails. What it does:

• Advances the dryer through selected cycles and timing intervals
• Turns power to the heating and motor circuits on/off at the correct points in a cycle
• Helps resolve symptoms like cycles that won't advance, the dryer stopping mid-cycle, or no heat occurring during timed cycles
• Works as the main user-programmable timing control for mechanical/timer-based dryers

• Turn power to the appliance off at the breaker before starting work to avoid shock.
• Handle the timer carefully to avoid bending terminals; match connector locations during reassembly.
• Some disassembly of the dryer console or control housing is required; keep track of screws and panel clips.

The module control assembly is the appliance's electronic control board that manages cycles, timers and control functions. Replacing a failing board can restore responsive controls and correct cycle operation. What it does:

• Directs cycle selection, timers and communication to components so the appliance runs the selected programs.
• Manages signals between the user interface and internal parts; failures often cause unresponsive or intermittent controls.
• Common symptom linkage: unit won't start, cycles won't advance, erratic operation, or display/control errors.
• Interfaces with the control harness and panel to coordinate motors, valves and other driven components.

• Disconnect power to the appliance before servicing to avoid shock or damage.
• Handle the control board by its edges and avoid touching circuitry; use anti-static precautions if available.
• Verify harness connectors, fuses and wiring before replacing the board; confirm connector orientation and secure mounting.

This electronic control module assembly manages the dryer's cycle selection, timing and user interface so the dryer runs the selected program reliably. Replaces a failed control board to restore normal operation and controls. What it does

• Receives user inputs and starts selected dryer cycles
• Controls cycle timing, motor and heating signals per program
• Communicates status to the display and keypads/buttons
• Common symptom link: dryer won't start, won't advance cycles, shows control/display errors, or has intermittent operation

• Disconnect power before service to avoid shock—this is an electrical assembly.
• Handle the board by the edges and avoid static discharge; use proper ESD precautions if available.
• Verify harness connections and mounting before powering up; do not force connectors.