Ne5ne595roabsr Parts

• Will not tumble

I went to the local Home Depot and Lowes, but they did not have the parts because they do not carry parts for the items they actually sell to people. Jumped on the phone and did a quick search for parts and came across appliancepartspros.com. I put in the make and model of my dryer and all the parts for the dryer where listed. I ordered the items on a Wednesday night. I opted for the two day shipping. I thought the items would be at my house by Friday but they did not arrive until Monday. I... Read more

• Doesn't shut off
• Won't start
• Will not tumble

The timer knob simply pulls off the shaft with a solid, steady pull. Cleaned the timer cavity of lint/dust buildup. Aligned the keying flat of the shaft and knob and pushed the new knob on with careful, steady pressure until it was obviously seated. No tools required other than a vacuum. The door switch would sometimes not shut the dryer off when the door was opened. New switch came with new fast-on connectors. Replacement required opening the top cover of the dryer and hinging it up. This... Read more

• Will not tumble
• Noisy

I've had this dryer apart a few times over the years, always got my parts here. Squeaks and igniter if memory serves. I ordered the two drum rollers that have a bearing in the center..they sit on metal shafts and freeroll. I ordered two..only one was bad but I needed the dryer up in one day, no time to disassemble and decide what to order then wait for parts. Tip: if you order the rollers, there are little washers (nylon?) between the roller and the c clips..don't lose them..they are hard to... Read more

Order the one part (sensor) Read more

Diagnosed the problem by seeing the lower fan was not turning. Didn't have any squeaks or sounds as a warning sign... It just stopped working. Went to AppliancePartsPros.com typed in my make & model number (Samsung NE58F9710WS). The web site pulled up the parts schematic, I navigated to the part on the schematic (Assembly #8 - Assy Motor Convection-Re DG96-00110B / AP5580897) and ordered it "Express Shipping" because I need the oven for Thanksgiving. When the part arrived, it looked identical... Read more

I replaced the energy regulator. Read more

• Will not agitate
• Pumps but will not spin
• Will not tumble
• Noisy

Upon removal of the lower inspection panel on the front of the machine, my 20 year old son thought the motor was bad by the smell. But he did discover what turned out to be the belt tensioner pulley laying inside the machine. After he pronounced it dead, without a thought to the idler pulley, I looked at the machine and determined the lack of movement was due to the idler pulley having "fallen" off the shaft by looking at the illustrated parts break down provided on this website. Ordered the... Read more

I ordered the 2 energy switches from Appliance Parts Pros with the model number. After receiving parts I started. 1st disconnected the range cord. Remove the control panel at the front. Then one switch at a time removed connection & reconnect to the new switch one by one. Then removed knob & old switch. Secured the new switch & knob to panel. Did the same to the other switch. Secured panel & reconnect. Tested radiant cook tops at different settings & both front heated up. Took approx. 30... Read more

We sent an email to AppliancePartsPros.com asking for their help in fixing our range. We gave them the model number (NE58F9500SS) of our Samsung Electric Range and told them about the faulty/dangerous two dual burners. We hated to get close to the range because the burners would turn on if you barely brushed by the range or if you would reach across it and accidentally touch the burner knobs all of a sudden you would feel heat or just see the light indicating the burner was on. We were... Read more

• No heat or not enough heat
• Takes too long to dry

Since finding out pulley on motor is factory installed, I had to order a new motor with new pulley on it. I could not remove old blower wheel from old motor, no matter how hard I tried so I had to purchase new blower wheel and new blower housing. I am super happy finding Appliancepartspros.com the prices, and my experience was great! I basically removed everything step by step, and then replaced with the new parts step by step. I had help by watching videos that were provided online before and... Read more

Checked the three door switches; used ohm meter to see if there was resistance or if a switch was bad. 2 out of 3 switches showed resistance with the ohm meter. The last one tested (of course the last one) NO (normally open) did not show resistance; I.e. the ohm meter reading did not change when the switch was depressed. Appliance parts pros was the only company that had the same model number I was looking for (SZW-V16-FD-63). I ordered the relay switch, 2 days later it arrived (regular... Read more

• Won't start
• No heat

Unplugged range, removed back panel. Loosened plug block from range, unhooked wires from existing element, then sliced through insulation between element ends with sharp knife. Removed screws holding element ends then removed element. Inserted new element, screwed it in place, connected wires and replaced plug block. Vacuumed up fiberglass insulation dust and replaced back panel. Replaced plug then tested. Read more

With the help of several You Tube videos I was able to diagnose the problem. Diagnosis was confirmed with the help of a multi-meter. The thermo fuse was dead. I ordered the part from Appliance Parts Pros on Wednesday and it arrived via UPS on Friday afternoon. The fuse was very easy to remove and replace and my range was up and running in less than 15 minutes. Local repair service wanted $100 to do the diagnosis plus parts plus a return trip for installation. I got the part from Appliance Parts... Read more

For about the last month or so the clothes (especially sheets) would just roll into a ball (like a big sausage) the wouldn't dry. Kept readjusting the clothes. I went on the internet to see what the issue could be and found lots of advise about shaking out the sheet and clothes first, using tennis balls, and using fuller or smaller loads. None of that worked. But I finally figured out that the reason they roll into a ball is because the belt around the drum is slipping or stretched. This... Read more

• Oven not heating evenly
• temperature not accurate

First I did a search for my model stove, I read the discriptions of what it was doing and came to the conclusion it was the fan motor. I then called an appliance dealer in my local area to find out that the fan motor cost all most double what I could get it online. I called to see how much it would cost to have a repair man come out and fix it, which would have cost 260 dollars. So in one of the suggested comments that someone previously left it stated that it could be done in about 20... Read more

• Door won't close
• Shuts off too soon
• Doesn't shut off
• Takes too long to dry

Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done. Total time was less than 10 minutes. Works like new. Read more