Vdsc536 Parts

Note: The factory recommends ordering 2 new screws, part# PD020033 when replacing the hinge. 

This 25-amp relay switches high-current components in your appliance on and off as directed by the control system. Replacing a failing relay restores consistent power to elements or motors and helps resolve intermittent, no-heat, or non-running issues.

• Controls power to high-demand components when signaled by the control
• Opens/closes the circuit to keep heavy current away from sensitive electronics
• Common failure symptoms: no heat or fan operation, intermittent cycling, or clicking without activation
• Helps correct erratic operation caused by pitted or stuck contacts

• Disconnect power at the breaker and verify no voltage before servicing
• Photograph and label wiring; transfer leads to matching terminals one at a time
• Mount securely in the original orientation; ensure tight, clean spade connections and replace any heat-damaged terminals
• Restore power and test operation

This burner igniter is the surface spark electrode that lights a gas burner on your range. Replacing a worn or cracked electrode restores dependable ignition so burners light promptly when you turn the knob.

• Produces a high-voltage spark at the burner head to ignite the gas
• Activates when a burner knob is turned; interfaces with the unit's spark ignition system
• A cracked insulator or worn tip can result in weak or no spark
• Symptoms may include clicking without lighting, intermittent ignition, or needing a match to light

• Disconnect electrical power and shut off gas before servicing
• Remove grates, caps, and the burner head as needed to access the electrode
• Transfer any mounting hardware from the old electrode; position the tip at the same gap and orientation as original
• Route and connect the lead to the correct terminal; keep wiring clear of heat and sharp edges, then test for spark before reassembly

A flat hot-surface ignitor that replaces a worn oven ignitor to restore reliable burner ignition. Heats to ignition temperature so gas burners can light more consistently and help the oven reach operating temperature. What it does:

• Heats to a high temperature to ignite the oven or range gas burner
• Common failure symptoms: oven won't light, long ignition delay, or intermittent ignition
• Direct replacement for flat-style hot-surface ignitors used in compatible gas ovens and ranges
• Matches electrical connector and mounting style of the original flat ignitor design

• Always shut off electrical power and the gas supply before starting repair
• Handle the ceramic element carefully — it is fragile; avoid touching the element surface with bare hands
• Verify connector/wire compatibility and use the original mounting hardware or manufacturer-recommended fasteners

This hinge assembly is the replacement door hinge that supports and guides the appliance door for secure opening and closing. It restores proper door alignment and helps eliminate sagging or uneven sealing. What it does:

• Replaces a worn or damaged door hinge to restore smooth door movement
• Helps correct door sag, misalignment, or gaps that affect sealing
• Reduces binding, sticking, or uneven closing caused by a failed hinge
• Provides the mounting point between the door and cabinet for stable operation

• Disconnect power to the appliance before beginning any repair.
• Support the door while removing/installing the hinge to prevent dropping or damage.
• Use appropriate hand tools and follow manufacturer's torque recommendations where available.

This is a top burner knob that is used on oven ranges that were manufactured prior to 2003. A burner knob is what the user turns to adjust the temperature on the burner. This part is manufactured out of a black plastic material and has white lettering on it.A new top burner knob may be needed if the original is cracked, broken, or damaged in any way. If any of the letters wear off of the knob, the user may wish to replace it. If the back of the knob is stripped out and it just spins without activating the range, then it will need to be replaced.This top burner knob is a genuine Viking part and is an OEM part sourced directly from the manufacturer. It is sold individually. This particular top burner knob is compatible with oven ranges that are manufactured by the Viking brand.

This bake element is the oven heating element that provides the lower radiant heat for baking. It replaces a failed or damaged 240-volt element to help restore even baking performance and proper oven heat. What it does:

• Heats the oven cavity during bake cycles by producing the required radiant heat.
• Replaces a burned-out or visibly damaged element that won't glow, causing little or no heat.
• Helps correct uneven baking when the original element is blistered, broken, or has open electrical continuity.
• Intended for use in 240V household ovens.

• Disconnect all power at the circuit breaker before starting any service.
• Element typically mounts at the back of the oven and connects to terminal screws.
• Handle carefully to avoid sharp metal edges; allow the element to cool fully before touching.

This pressure regulator controls incoming natural gas pressure to the appliance, helping maintain steady burner performance and proper combustion. It replaces a worn or faulty regulator to restore correct gas flow and consistent heat. What it does:

• Regulates downstream natural gas pressure for safe, consistent burner operation
• Can correct symptoms such as weak or uneven flames, difficulty maintaining a flame, or a burner that won't light reliably
• Works with the appliance's gas valve and manifold to balance fuel delivery to burners
• Designed to meet OEM fit and function for compatible Viking gas ranges

• Turn off gas supply and electricity before starting any repair
• After installation, perform a proper gas leak test and check for correct burner operation
• Do not modify the part; use the OEM-specified regulator for safe operation

The Burner Cap is an OEM part for Viking ranges. It sits atop the burner head, distributing the flame evenly for optimal cooking performance and protecting the burner head from spills and debris.

Causes of a bad burner cap can include prolonged exposure to high heat, accidental impact from cookware, or buildup of food residues and grease.

Symptoms of a bad Burner Cap include:

• Uneven flame distribution or yellow flames
• Difficulty in igniting the burner
• Visible cracks, chips, or warping on the cap
• Persistent odors or smoke from burnt residues

This OEM Viking part ensures your range maintains its high cooking efficiency and safety.

Thermostat for the griddle and bake surface that regulates cooking temperature to restore consistent heat. Replacing a faulty thermostat can stop under-heating, overheating or irregular temperature cycling so food cooks evenly. What it does:

• Senses and regulates griddle/bake temperature by switching heater circuits to maintain the set heat level.
• Stops symptoms like a griddle or bake surface that won't reach temperature, runs too hot, or cycles on and off erratically.
• Helps restore predictable cooking performance and prevents unevenly cooked food.
• Works as the temperature control element for the griddle/bake function on compatible ranges.

• Disconnect power to the appliance before starting work and allow all surfaces to cool.
• Compare new part to the old thermostat and follow the appliance wiring diagram for correct connections.
• Use proper tools and fasteners; secure mounting so the sensor/shaft is positioned as originally installed.
• After installation, restore power and verify proper temperature control and safe operation.

This panel-mounted indicator light signals oven operation. Replace it to restore clear status feedback when the original lamp fails, stays on, flickers, or is damaged.

• Illuminates on the control panel to indicate the oven is heating or in use
• Common replacement signs: light does not turn on, remains lit when oven is off, flickers/intermittent, or physical damage
• Restores visible status confirmation during preheat, bake, or broil
• Indicator only; it does not control oven temperature or heating

• Disconnect power at the breaker before servicing
• Access the rear of the control panel to remove the old indicator
• Note wire locations; transfer the leads to the new light and seat it fully
• Restore power and test operation before reassembly

This door latch secures the oven/door in the closed position so the appliance can operate safely and maintain temperature. It replaces a worn or broken latch to restore proper door closure and reliable oven use. What it does:

• Secures the oven door closed so the appliance can complete cooking cycles
• Stops the door from popping open or failing to stay latched
• Resolves issues where the oven won't start or complete cycles due to an unlatched door
• Replaces a damaged, bent, or broken latch that prevents proper closure

• Disconnect power (and gas if applicable) before starting any repair
• Handle door and any glass parts carefully; remove the oven door if needed for access
• Verify latch alignment and striker engagement when installing; adjust as required

This control board operates the oven's self-clean cycle and timer functions, restoring reliable control of cleaning, timed cook settings, and related control signals. Replaces a failed electronic module to return normal oven control behavior. What it does:

• Manages the oven self-clean sequence and related safety interlocks
• Controls clock and timer functions used for delayed or timed cooking
• Sends/receives control signals to the oven's temperature and door systems
• Commonly replaces a board that causes self-clean to fail, timers to not run, or control errors to appear

• Disconnect power at the breaker before starting; this is an electrical/ESD-sensitive module
• Handle the board by edges and avoid static discharge; wear an anti-static strap if available
• Installation typically requires removing the console or rear panel and reconnecting wiring harnesses exactly as found

Orifice hood (#57) is the burner component that centers and protects the burner orifice, helping deliver a steady, correctly-shaped gas flame for even cooking. Replacing a damaged hood restores reliable burner operation and flame control. What it does:

• Positions and shields the burner orifice to ensure correct gas flow to the burner.
• Helps maintain proper flame shape for even heat distribution across the burner.
• Can cause uneven or weak flames, delayed ignition, or irregular heating when damaged or corroded.
• Use as a direct replacement when the existing hood is bent, cracked, or excessively worn.

• Shut off the appliance power and gas supply before attempting any service.
• Replace only when the burner is cool; do not force or over-tighten parts.
• Inspect the burner head and orifice for damage or debris when installing this hood.

Light bulb socket assembly includes: Light bulb socket, light bulb and light lens.

This black griddle control knob replaces a worn, broken, or missing control on compatible Viking griddles and ranges, restoring reliable manual temperature selection and a finished look. Easy-to-swap for a quick cosmetic and functional repair. What it does

• Fits onto the griddle control valve stem to allow safe, tactile adjustment of heat settings.
• Replaces cracked, stripped, or missing knobs that prevent proper control or accurate setting selection.
• Restores a secure grip and visible setting indicator for repeatable temperature control.
• Helps eliminate intermittent contact or slipping caused by damaged knobs.

• One black griddle control knob

• Turn burners/griddle off and allow unit to cool before replacing the knob.
• Pull the old knob straight off the valve stem; align the new knob's splines and push on until fully seated.
• Do not force or hammer the knob; if it does not fit, verify correct part number and valve stem orientation.