Vgic305 Parts

This spark module controls ignition for the surface burners on gas cooktops and ranges. When a knob is turned, it generates the high-voltage spark needed to light the gas, restoring fast, consistent burner ignition across four positions.

• Generates high-voltage pulses to ignite up to four surface burners
• Activates when a burner switch is turned to provide reliable sparking to the igniters
• Common symptoms include no spark on any surface burner
• Intermittent or weak sparking across multiple burners
• Burners only lighting with an external flame

• Disconnect electrical power and shut off gas before servicing
• Photograph or label all wire positions; move wires to the new module one at a time to avoid miswiring
• Mount the module securely in the original location; keep leads dry and routed away from heat/sharp edges
• High-voltage hazard: do not touch igniter outputs during testing; verify all connections are fully seated before restoring power

Note: The factory recommends ordering 2 new screws, part# PD020033 when replacing the hinge. 

This bimetal gas control valve regulates gas flow to the oven burner as part of the ignition circuit, helping ensure safe light-off and steady, reliable heat so your range reaches and maintains the set temperature.

• Regulates gas to the burner in response to the igniter/thermostat signal
• Bimetal safety design keeps gas closed until proper ignition heat is present
• Helps maintain consistent heating once the burner is lit
• Can address cases where the igniter glows but the burner won't light
• Resolve ovens that heat intermittently or take unusually long to preheat

• Disconnect power and shut off gas supply before servicing.
• Note valve orientation; transfer any required fittings/orifices from the original.
• Use approved gas-rated thread sealant on NPT threads only; never on flare connections.
• After installation, leak-test all joints and verify proper ignition and burner operation.

The Oven Burner is an OEM part for Viking ovens, designed to deliver the heat necessary for baking, roasting, and other oven-based cooking processes. This part is a crucial component of the oven's heating system, generating the flame that heats the oven chamber.  

Causes of a bad Oven Burner can range from a clogged burner port, preventing gas from being emitted evenly, to wear and tear that affects the burner's ability to ignite or maintain a flame. Damage to the burner assembly, such as bending or corrosion, can also impair its function and efficiency.

Symptoms of a bad Oven Burner include:

• The oven failing to heat up properly or evenly.
• A noticeable delay in ignition when the oven is turned on.
• An uneven flame or a flame that goes out unexpectedly during operation.
• The presence of gas odor when the oven is on, indicating incomplete combustion.

This burner igniter is the surface spark electrode that lights a gas burner on your range. Replacing a worn or cracked electrode restores dependable ignition so burners light promptly when you turn the knob.

• Produces a high-voltage spark at the burner head to ignite the gas
• Activates when a burner knob is turned; interfaces with the unit's spark ignition system
• A cracked insulator or worn tip can result in weak or no spark
• Symptoms may include clicking without lighting, intermittent ignition, or needing a match to light

• Disconnect electrical power and shut off gas before servicing
• Remove grates, caps, and the burner head as needed to access the electrode
• Transfer any mounting hardware from the old electrode; position the tip at the same gap and orientation as original
• Route and connect the lead to the correct terminal; keep wiring clear of heat and sharp edges, then test for spark before reassembly

Restore smooth, controlled movement to your appliance door or lid with this hinge assembly. Replacing a worn hinge corrects sagging, binding, and poor closure so the door aligns and closes properly for reliable everyday use.

• Provides the pivot and support for the door or lid
• Controls opening/closing motion for smooth, consistent operation
• Helps maintain alignment so the door closes flush with the frame
• Common symptoms of a failing hinge: sagging, binding, squeaking/popping, or a door that won't close fully or evenly

• Disconnect power and, shut off gas/water before servicing
• Support the door; mark hinge positions; remove mounting screws carefully
• Transfer any brackets or covers from the original hinge if needed
• After installation, check alignment and closure; adjust per the service manual

A flat hot-surface ignitor that replaces a worn oven ignitor to restore reliable burner ignition. Heats to ignition temperature so gas burners can light more consistently and help the oven reach operating temperature. What it does:

• Heats to a high temperature to ignite the oven or range gas burner
• Common failure symptoms: oven won't light, long ignition delay, or intermittent ignition
• Direct replacement for flat-style hot-surface ignitors used in compatible gas ovens and ranges
• Matches electrical connector and mounting style of the original flat ignitor design

• Always shut off electrical power and the gas supply before starting repair
• Handle the ceramic element carefully — it is fragile; avoid touching the element surface with bare hands
• Verify connector/wire compatibility and use the original mounting hardware or manufacturer-recommended fasteners

This pressure regulator controls incoming natural gas pressure to the appliance, helping maintain steady burner performance and proper combustion. It replaces a worn or faulty regulator to restore correct gas flow and consistent heat. What it does:

• Regulates downstream natural gas pressure for safe, consistent burner operation
• Can correct symptoms such as weak or uneven flames, difficulty maintaining a flame, or a burner that won't light reliably
• Works with the appliance's gas valve and manifold to balance fuel delivery to burners
• Designed to meet OEM fit and function for compatible Viking gas ranges

• Turn off gas supply and electricity before starting any repair
• After installation, perform a proper gas leak test and check for correct burner operation
• Do not modify the part; use the OEM-specified regulator for safe operation

Replacement thermostat control knob in black that restores precise temperature selection and safe operation for compatible Viking ranges and cooktops. Simple, direct replacement for a cracked, loose, or missing control knob. What it does:

• Replaces a worn, cracked, stripped, or missing thermostat/control knob so you can set temperature or heat levels as intended.
• Provides a clear pointer for accurate selection of heat or temperature settings.
• Helps prevent accidental changes from a loose or broken knob.
• Fits onto the control stem to restore normal user control.

• Ensure the appliance is turned off and cool before replacing any control parts; disconnect power for electric ranges or switch gas off for gas models when applicable.
• Remove the old knob by pulling it straight off the control stem; align the new knob opening with the stem and push until fully seated.
• If the knob does not seat easily, inspect the control stem for damage or debris and clean or replace the control if needed.

The Burner Cap is an OEM part for Viking ranges. It sits atop the burner head, distributing the flame evenly for optimal cooking performance and protecting the burner head from spills and debris.

Causes of a bad burner cap can include prolonged exposure to high heat, accidental impact from cookware, or buildup of food residues and grease.

Symptoms of a bad Burner Cap include:

• Uneven flame distribution or yellow flames
• Difficulty in igniting the burner
• Visible cracks, chips, or warping on the cap
• Persistent odors or smoke from burnt residues

This OEM Viking part ensures your range maintains its high cooking efficiency and safety.

Thermostat for the griddle and bake surface that regulates cooking temperature to restore consistent heat. Replacing a faulty thermostat can stop under-heating, overheating or irregular temperature cycling so food cooks evenly. What it does:

• Senses and regulates griddle/bake temperature by switching heater circuits to maintain the set heat level.
• Stops symptoms like a griddle or bake surface that won't reach temperature, runs too hot, or cycles on and off erratically.
• Helps restore predictable cooking performance and prevents unevenly cooked food.
• Works as the temperature control element for the griddle/bake function on compatible ranges.

• Disconnect power to the appliance before starting work and allow all surfaces to cool.
• Compare new part to the old thermostat and follow the appliance wiring diagram for correct connections.
• Use proper tools and fasteners; secure mounting so the sensor/shaft is positioned as originally installed.
• After installation, restore power and verify proper temperature control and safe operation.

This is a thermostat made by Viking and is meant for use with ovens. If the current thermostat is faulty or worn, this part can be used for repair or replacement. Without a working thermostat, the oven heat will not be able to be properly maintained at the temperature set by the user. If the oven is struggling to stay hot enough, or cannot heat up at all, the thermostat should be immediately replaced. Special tools are required to replace this thermostat, and the oven will need to be completely disconnected from all power sources. Work gloves are recommended for protection during any repair or replacement process.This is an authentic OEM replacement part made of high-quality materials. This thermostat can be used with a variety of different models of ovens that have been manufactured by Viking and some other brands. This part is sold individually.

This panel-mounted indicator light signals oven operation. Replace it to restore clear status feedback when the original lamp fails, stays on, flickers, or is damaged.

• Illuminates on the control panel to indicate the oven is heating or in use
• Common replacement signs: light does not turn on, remains lit when oven is off, flickers/intermittent, or physical damage
• Restores visible status confirmation during preheat, bake, or broil
• Indicator only; it does not control oven temperature or heating

• Disconnect power at the breaker before servicing
• Access the rear of the control panel to remove the old indicator
• Note wire locations; transfer the leads to the new light and seat it fully
• Restore power and test operation before reassembly

This left-hand single thermal valve controls gas flow to one burner assembly, helping restore safe, consistent operation in affected ovens or ranges. It replaces a faulty valve to re-establish proper temperature regulation and ignition behavior. What it does:

• Regulates gas flow to the left-side burner or oven pilot as part of the appliance's gas control system
• Helps prevent unwanted gas flow when the burner is off and allows normal ignition when called for
• Commonly used when burners fail to light, spark but no gas, or flame is irregular on the left side
• Works with existing mounting and gas line connections as the OEM replacement component

• Turn off the appliance's gas supply and electrical power before starting any repair
• Only connect or adjust gas fittings with proper tools and thread sealant rated for gas; check for leaks after installation
• Do not modify the valve; replace with the correct left-hand unit to ensure safe operation

This door glass seal strip replaces the rubber/foam seal that fits between the oven door and its inner glass to help keep heat and odors inside the oven. Restores a tighter door seal for more consistent cooking and reduced heat loss. What it does:

• Seals the gap around the inner door glass to reduce heat escaping from the oven cavity
• Helps prevent smoke and odors from leaking into the kitchen during use
• Cushions and stabilizes the inner glass to reduce rattling or vibration
• Supports oven temperature consistency by improving the door seal

• Disconnect power and allow the oven and door to cool completely before starting
• Removing the oven door or inner glass panel may be required; follow the manufacturer service instructions
• Inspect the seal channel and glass edges for damage or debris before installing the new seal
• Use only manufacturer-recommended fasteners or adhesives; do not overtighten clips or screws

This valve and bolt kit is a direct replacement assembly that secures the valve to the appliance and restores the proper seal and connection at the valve mounting point. Use it when a worn or damaged valve mounting is causing leaks or operational issues. What it does:

• Secures the valve to the appliance chassis with the correct mounting hardware
• Restores a tight seal at the valve connection to help prevent leaks
• Re-establishes reliable flow/control through the valve assembly
• Commonly used when the valve mounting is loose, damaged, or corroded

• Shut off power and fuel (gas or liquid) supply before beginning service
• Inspect surrounding gaskets and seals and replace if cracked or damaged
• After installation, test for proper operation and check all connections for leaks per local codes