Wfw97hedco Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Water Pump is an OEM replacement part for Whirlpool washing machines. This component is responsible for circulating and draining water during the wash and rinse cycles, ensuring proper cleaning and rinsing of clothes.

Causes of needing to replace the water pump can include normal wear and tear over time, clogging or obstruction by debris or foreign objects, or mechanical failure due to excessive strain or motor burnout.

Symptoms of a faulty water pump include:

• Failure to drain water from the washer tub
• Leaking or standing water in the washer drum
• Unusual noises or vibrations during operation
•  Incomplete or insufficient water circulation during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.

The Washer/Dryer Door Hinge is an OEM replacement part for Whirlpool washer and dryer units. It is a component that allows the appliance door to open and close smoothly while providing a secure attachment point to the main cabinet.

Symptoms of a bad washer/dryer door hinge:

• Difficulty in opening or closing the door
• Door sagging or not aligning correctly when closed
• Excessive noise or rattling when the door is opened or closed
• Water leaks or air leaks around the door area

Causes of a bad door hinge can include mechanical wear and tear over time, physical damage due to impact or mishandling, or improper installation or alignment of the hinge components.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer and dryer models.

The Water-Level Pressure Switch is an OEM part for Whirlpool washing machines. It is responsible for detecting the water level inside the washer and communicating this information to the control board to regulate the filling and draining processes. This switch ensures that the washer has the correct amount of water for each cycle, contributing to efficient and effective washing.

You should replace the water-level pressure switch if it malfunctions or fails. Causes of a bad switch can include electrical issues, blockage in the pressure hose, or wear and tear over time.

Symptoms of a bad pressure switch include:

• Incorrect water levels during cycles
• The washer not filling or overfilling
• The washer not advancing to the next cycle
• Error codes related to water level issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hinge Pin Bushing is an OEM part designed for Whirlpool washing machines that is responsible for providing a pivot point for the hinge pin and ensuring the door opens and closes smoothly and securely. Over time, this bushing can wear out or become damaged, leading to issues with the door's alignment and opening.

Symptoms of a bad Hinge Pin Bushing include:

• Difficulty in opening or closing the door
• Noise when the door is moved
• Loose or wobbly door 
• The door not staying closed

Causes of a bad hinge pin bushing can range from normal wear and tear to excessive force used on the door or lid. 

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Water Inlet Flow Meter is an OEM part for Whirlpool washing machines. It is responsible for monitoring and regulating the flow of water entering the washing machine during the fill cycle, ensuring the correct amount of water is added for efficient and effective cleaning.

Causes of a faulty Water Inlet Flow Meter include sediment buildup, physical damage, or electrical issues with the meter's sensors or connections.  

Symptoms of a bad Water Inlet Flow Meter include:

• Incorrect water levels in the wash tub
• Washing machine not filling properly with water
• Error codes related to water inlet flow or water level issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Latch is an OEM part for Whirlpool washing machines. It is designed to secure the washer door during operation, ensuring it remains closed and locked throughout the wash and spin cycles. This latch is essential for the safe and efficient operation of the washing machine, preventing the door from opening mid-cycle and avoiding water leaks.

 Causes of a bad door latch can include regular wear and tear, damage from forceful closing or opening, or electrical issues within the latch mechanism. A malfunctioning door latch can prevent the washer from operating correctly and may lead to safety concerns.

Symptoms of a bad door latch include:

• The washing machine door not latching or locking properly
• The washer not starting or stopping mid-cycle
• Error codes related to door lock issues
• Difficulty in opening or closing the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Outer Door Boot Seal Clamp Washer is an OEM replacement part specific to Whirlpool-brand washing machines. Multiple washers are used behind the outer boot seal clamp to create a uniform, compressed seal around the washer door opening. 

Symptoms of worn or damaged clamp washers include:

• Water leaks occurring around the outer door seal 
• The door not sitting flush or sealing tightly when closed
• Water intrusion indicated by interior mold/mildew buildup

Causes may involve deterioration of clamp washer material over extended washing machine use cycles. Washers crack or fail to adequately cushion and compress the door seal.

The part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Inner Door Boot Seal Clamp is an OEM replacement part for Whirlpool front-loading washing machines. This clamp is responsible for securely holding the inner door boot seal in place. The door boot seal helps to prevent water leaks and contain washing processes. Its proper placement is ensured by this specialized clamp.

Causes of a bad clamp can include damage from over-tightening during installation and breaking or cracking over time due to normal use.

Symptoms of a bad Inner Door Boot Seal Clamp include:

• Gaps appearing around the edges of the door where water can seep or leak
• The inner boot seal not fitting or sitting flush any longer
• Developing puddles or drips of water outside the washer
• Visible water buildup inside the door seal cavity

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Some Kenmore models.

The Dispenser Actuator is an OEM part for Whirlpool washing machines. It is responsible for controlling the release of detergent and fabric softener during the wash cycle, ensuring that these cleaning agents are dispensed at the correct times.

Causes of a bad dispenser actuator can include wear and tear over time, damage from detergent residue build-up, or electrical faults within the actuator mechanism. If the actuator fails, it can disrupt the washing cycle and prevent proper dispensing of cleaning agents.

Symptoms of a bad dispenser actuator include:

• Detergent or fabric softener not being dispensed
• The washer displaying error codes related to the dispenser
• Intermittent or inconsistent dispensing
• Unusual noises during the dispensing phase

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

• Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
• A desire to refresh or update the appearance of the appliance without the need for complete replacement
• Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Strike is an OEM part for Whirlpool washing machines. This component engages with the door latch to securely close the washing machine door. Ensuring a tight seal, the door strike plays a pivotal role in the appliance's safety mechanisms, preventing the washer from operating if the door is not properly shut. 

Causes for replacement often stem from physical damage, such as breaking or bending due to forceful closing of the door, normal wear and tear, or manufacturing defects that prevent the door from latching correctly. 

Symptoms of a bad Door Strike include:

• The washing machine door won't latch or lock properly.
• The washer fails to start due to the door not being recognized as closed.
• Visible damage or wear to the strike, indicating it may not engage correctly with the latch.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

• Visible scratches or chips on the appliance surface
• Areas of exposed metal prone to rust
• Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.

Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.

Symptoms of a bad Front Leveling Foot include:

• The washing machine rocking or wobbling during operation
• Increased vibration and noise
• The washer being unlevel, affecting wash performance
• Difficulty in adjusting the foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Valve is an OEM component for Whirlpool and KitchenAid washing machines. As part of the water supply system, the water inlet valve controls the flow of water into the washer during fill cycles.

Causes of a bad water inlet valve include mineral buildup or sediment accumulation inside the valve mechanism over time. This can restrict its ability to open and close properly.

Symptoms of a bad water inlet valve are:

• The washer fails to fill or fills slowly 
• Water leaking from the valve area
• Loud knocking or clanking sounds coming from the valve

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Temperature Sensor is an OEM part for Whirlpool washing machines. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle. Note: The sensor does not include the seal WP8540766. Order separately if needed. 

Causes of a bad temperature sensor can be failures over time due to mechanical wear, thermal stress on electronic components, or damage from leaks/flooding inside the unit.

Symptoms of a bad water temperature sensor include:

• Inability to switch between wash steps or advance through the cycle
• Erratic or inconsistent temperature readings
• Failure alarms or error codes displayed
• Improper or incomplete washing even on high heat settings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.