Whirlpool Cabrio Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Bearing and Tub Seal Kit is an OEM part for Whirlpool washing machines. It includes high-quality bearings and a tub seal designed to ensure smooth operation and prevent water leaks. The bearings allow the tub to spin freely and quietly, while the seal protects the bearings from water and detergent, extending their life and the overall efficiency of the washing machine.

Causes of failure for these components can vary but often include water infiltration that leads to rust and deterioration of the bearings, or wear and tear from heavy or unbalanced loads that put additional stress on the seal and bearings. 

Symptoms of a bad bearing and tub seal kit include:

• Noisy operation, especially during the spin cycle
• Water leaking from the bottom of the washer
• The washing machine tub struggling to spin or not spinning at all

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Washer Basket Hub is an OEM part for Whirlpool washing machines. It is designed to connect the washer basket to the drive shaft, enabling the basket to spin during the wash and spin cycles. This component ensures that the basket rotates smoothly and efficiently, contributing to the overall performance and functionality of the washing machine.

You should replace the washer basket hub if it becomes worn out or damaged. Causes of a bad basket hub can include regular wear and tear from frequent use, corrosion due to water exposure, or damage from overloading the washer. A faulty basket hub can impair the spinning action, leading to inefficient washing and rinsing.

Symptoms of a bad washer basket hub include:

• The washer basket not spinning or agitating properly
• Loud noises such as grinding or clunking during spin cycles
• The washer failing to complete cycles or properly clean clothes
• The basket being loose or wobbling during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods designed to support the washing machine's tub assembly. By absorbing vibrations and stabilizing the tub during the spin cycle, these rods play a crucial role in reducing noise and preventing the washing machine from moving excessively. 

Causes of a bad Suspension Rod Kit can include normal wear and tear, overloading the washing machine, or frequent heavy cycles that put extra strain on the rods. 

Symptoms of a bad Suspension Rod Kit include:

• The washing machine is excessively noisy during the spin cycle.
• The tub seems unbalanced or moves more than usual, even with light loads.
• The washing machine "walks" or moves from its original position during operation.
• Unfinished cycles or error codes indicating an unbalanced load.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This Inner Cap is an OEM replacement part for Whirlpool washers that is responsible for keeping water, fabric softener, and debris from getting into the agitator assembly. The cap is located at the top of the agitator to protect the agitator's internal parts. Fabric softener dispenses through the holes in the agitator above the cap.

Description- For the O ring seal only order WPW10072840.

This part fixes the following symptoms-

• Water leakage from the agitator.
• Fabric softener not dispensing correctly.
• Poor washing performance.
• Unusual noises during agitation.
• Excessive wear on clothes.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Drain Pump is an OEM part for Whirlpool washing machines. This component is responsible for expelling water from the washing machine at the end of the wash and rinse cycles. Its motor and impeller system push water through the drain hose, helping to ensure that the washing machine empties completely.

Symptoms of a failing drain pump include:

• Water not draining out of the washing machine, leading to stagnant water pooled inside the tub
• Unusual noises, such as buzzing or humming, indicating that the pump motor is struggling
• The washing machine stopping mid-cycle due to inability to drain

Causes of drain pump failure typically include obstruction by foreign objects like coins or socks, motor burnout, or impeller damage. Regular maintenance, such as checking for debris in the pump's filter, can help prevent these issues.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lid Lock Assembly is an OEM part for Whirlpool washing machines. It ensures the washer lid is securely locked during operation, preventing it from being opened mid-cycle and ensuring safe and efficient washing.

Causes of a bad lid lock assembly can include wear and tear from frequent use, electrical issues such as short circuits, and physical damage from impact or mishandling. A malfunctioning lid lock can disrupt the washing cycle, leading to incomplete washes or safety concerns.

Symptoms of a bad lid lock assembly include:

• The washer not starting or stopping mid-cycle
• Error codes indicating a lid lock issue
• The lid not locking or unlocking properly
• The washer lid feeling loose or failing to stay closed

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hinge is an OEM part for Whirlpool washing machines. This component is essential for the proper function of the washing machine door, allowing it to open and close smoothly. The hinge ensures that the door stays aligned and securely closed during the wash cycle, preventing leaks and maintaining the safety of the machine's operation.

Causes of a bad hinge can include repeated use over time, accidental force or impact, or corrosion from exposure to moisture.

Symptoms of a bad hinge include:

• Difficulty opening or closing the washing machine door
• A door that does not stay closed properly
• Unusual noises when the door is moved
• Visible damage or misalignment of the hinge

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool top load washer agitator inner cap seal is an OEM replacement part responsible for providing a tight seal and preventing water from leaking in to the agitator. The inner cap seal is located underneath the agitator cap at the top of the agitator assembly.

Over time, the Inner Cap Seal can become worn, cracked, or damaged due to repeated exposure to water, detergents, and the high-speed spinning of the tub. A faulty seal can lead to water leaks, excessive noise, and potential damage to other components.

This part fixes the following symptoms:

• Water leaking from the agitator assembly during operation
• Excessive splashing or spraying of water during the wash cycle
• The agitator not moving or agitating properly
• Visible wear, tears, or damage to the inner cap seal
• Difficulty in removing or reattaching the agitator assembly

The Whirlpool inner cap seal can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Inlet Hose Screen and Gasket is an OEM part for Whirlpool washing machines. This component is designed to filter debris from the water entering the machine and ensure a tight seal between the hose and the water inlet valve. By preventing debris from entering the washing machine, it helps to maintain the appliance's performance and longevity.

Causes of a bad inlet hose screen and gasket can include clogging from mineral deposits or debris, wear and tear over time, or damage due to improper installation or removal. A compromised screen or gasket can lead to reduced water flow and potential leaks.

Symptoms of a bad inlet hose screen and gasket include:

• Reduced water flow into the washing machine
• Visible debris or buildup on the screen
• Water leaks at the hose connection
• The washing machine not filling properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Rotor Position Sensor is an OEM part for Whirlpool washing machines. It is responsible for monitoring the position and speed of the rotor, ensuring the motor operates correctly to perform various washing cycles. The sensor sends precise data to the washing machine's control board, which adjusts the motor's function accordingly.

Causes of a bad rotor position sensor can include electrical failures, wear and tear over time, or physical damage from impact or moisture exposure. When this sensor fails, it disrupts the communication between the motor and control board, leading to operational issues.

Symptoms of a bad rotor position sensor include:

• The washing machine not spinning or agitating
• Error codes indicating motor issues
• The machine stopping mid-cycle
• Unusual noises coming from the motor area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Spring Kit is an OEM part for Whirlpool washing machines. This kit includes multiple springs that support the washer tub, helping to absorb shocks and reduce vibrations during the wash cycle, ensuring smooth and stable operation.

Causes of a bad suspension spring can include wear and tear over time, heavy loads, or unbalanced loads that put excessive strain on the springs. Damaged or worn springs can lead to increased movement and instability, affecting the washer’s performance and potentially causing damage to other components.

Symptoms of a bad suspension spring include:

• Excessive shaking or vibrating during the wash cycle
• The washer tub appearing out of alignment or sagging
• Loud banging noises during operation
• The washer moving or "walking" across the floor

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bearing Installation Tool is an OEM part for Whirlpool washing machines. This tool is specifically designed to aid in the installation of bearings in the washing machine tub, ensuring proper alignment and secure placement.

This tool is essential for replacing worn-out or damaged bearings, which can affect the performance of the washing machine. Over time, bearings can wear out due to continuous usage, exposure to moisture, or heavy loads. Using this tool ensures that new bearings are installed correctly, preventing potential issues caused by misalignment or improper installation.

Symptoms of bad bearings include:

• Loud, grinding noises during the spin cycle
• Excessive vibration or movement of the washer
• Leaks from the tub area
• The drum not spinning smoothly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Used to install the bearings in the bearing and tub seal kit, part number: W10435302. When replacing this part, if you see that your motor stator is broken, search by your model number to make sure you get the right stator for your model.

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

• Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
• A desire to refresh or update the appearance of the appliance without the need for complete replacement
• Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

• Visible scratches or chips on the appliance surface
• Areas of exposed metal prone to rust
• Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.