Need Help?
Call or text
Show parts
This genuine Husqvarna screw can be used as a replacement part for chainsaws. The function of a screw for a chainsaw is to attach parts to one another through rotation that pierces through the components. Screws are often subject to replacement in the lifespan of a small engine appliance as they are small components that are easily lost or misplaced without any immediate impact on the appliance; additionally, screws can loosen themselves over time or can suffer damage from general wear and tear or through direct impact upon collision. Screws can also corrode over time, impairing their ability to keep components attached to one another. If this is the case with a screw in a chainsaw, the part should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following brands: Husqvarna, Craftsman, and Poulan.
Usually ships within 4 - 14 days
The ignition module is an assembly that includes the condenser and the ignition boot coil that connects to the spark plug. It creates the power to generate the spark as the flywheel magnet passes the module. Then it transfers that energy into the spark plug, which will power the engine and keep it running. If the engine is idling rough or starts and then dies, it could be a sign that the spark plug or ignition module are bad. In severe cases, the engine might not start at all. Since spark plugs are a part of routine maintenance, it's usually the later issue. This ignition module can provide an exact fit for select machines. This genuine OEM ignition module is manufactured by Husqvarna to exact standards. It can be used with a number of chainsaws from Poulan, Craftsman, and Mcculloch. This durable unit is made of plastic, rubber, and metal and is sold as an entire assembly. No hardware or other accessories are included with the purchase. Always wear gloves and allow the engine to cool before performing any parts repairs or replacements.
This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.
This part is a replacement ground strap. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a damaged or defective ground strap in a variety of chainsaw models. The ground strap works to ground a live current and is an important safety feature. Equipment should not be operated without a working ground strap. This part connects to the ignition module of the chainsaw, which transfers an electrical current to the spark plugs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this ground strap, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this ground strap is suitable for use on several different models of chainsaws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.
This wire harness assembly is an authentic replacement for chainsaws. It is supplied from the manufacturer. The wire harness assembly connects to the ignition module. It is made of two wires. One of the wires carries the power from the coil to the switch, while the other wire attaches to the engine ground on one side and has a switch contact on the other side. The wires have a rubber insulated coating that helps to protect them from high heat. These wires can suffer damage in many ways. They could become frayed or cut, they could have been subject to extremely high temperatures, and more. When they are damaged, it can cause a continuity loss in the circuit which can shut off the saw. Owners should look for broken or frayed wires. They can also use a multimeter to check the wires for continuity. If there are issues, the wires should be replaced right away. The chainsaw wire harness assembly is a genuine OEM replacement part for use with chainsaws. The assembly is sold individually. It will work with select chainsaws from Craftsman, Husqvarna, Poulan, and Poulan Pro.
This replacement part is a cylinder shield. This is a genuine replacement part made by Husqvarna. This shield is made of durable material to keep the cylinder of the lawnmower safe during use. This cover is responsible for repelling flying debris or other objects to ensure that the engine runs smoothly and effectively. A new cylinder shield might be needed if the current one is at all damaged. This might include being dented, cracked, or bent. If the shield is unable to completely cover the cylinder it would be best to replace this part as soon as possible. The repair should be simple as most shields are able to click easily into place. This part is a genuine OEM replacement part to ensure proper fit. It is also sold individually and is sourced directly from the manufacturer.
This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.
This part is a lever ignition switch, often called an ignition lever. The lever ignition switch is used on chainsaws. This part is a switch starts and stops the chainsaw. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.A new lever ignition switch may be needed if the engine will not start, if the engine suddenly dies, if the chainsaw only runs intermittently, or if the kill-switch is not engaging. A Phillips screwdriver, Torx driver, flat-head screwdriver, and ratchet/socket set will be needed to perform this replacement.This lever ignition switch is a genuine Husqvarna part. It is sold individually. This particular lever ignition switch is compatible with gas chain saws that are manufactured by Husqvarna, Poulan, and Jonsered.
This part is a replacement spring ignition switch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or faulty spring ignition switch in a variety of gas chainsaw models.This part is essential for applying tension to the throttle control lever. If the spring ignition switch is malfunctioning, the chainsaw will not work properly, and the user will not have sufficient control over the throttle. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. Proper tools are required to replace this part. For more accurate information on how and where to install this spring ignition switch, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this spring ignition switch is suitable for use on several different models of gas chain saws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.
This is a genuine OEM replacement choke lever is sourced from the manufacturer for use on chainsaws. The choke lever is triggered by the choke knob to open the choke when cranking the chainsaw's engine. The choke is used to limit airflow into the carburetor when starting the engine. In cold temperatures, this enriches the mixture of fuel to air and forces this into the carburetor.Normal wear and tear can cause the choke lever to crack and possibly break. Accidents such as dropping the chainsaw may also cause the lever to break. Without the choke lever, the choke cannot be engaged when needed and the engine may not start in cold weather. When this occurs, the lever will need to be replaced. This is a simple repair that requires a Phillips head screwdriver, flat head screwdriver, ratchet and socket set, and torque drivers. Remove the top cover to access the choke knob. Remove the cover from the air filter and the ignition switch lever. Disconnect the choke from the carburetor linkage and remove the lever. Install the new lever. Connect the new lever to the carburetor linkage. Reinstall the ignition switch lever, air filter cover, and outer covering. This choke lever is designed for use on chainsaws. It is sold individually. This choke lever is manufactured for Poulan chainsaws.
This part is discontinued by the manufacturer and is no longer available for purchase.
This quality air filter cover protects and secures the air filter to the chainsaw. If the air filter cover is not in place, the air filter could become excessively dirty or damaged. Through use or impact, the air filter cover can become damaged and may need to be replaced. A quick visual inspection will tell whether there are holes or cracks in the cover that necessitate a replacement.This air filter cover replacement requires no tools. The air filter cover comes with small tabs that can be used to secure it in place over the air filter. Tug on the original air filter cover and pull it out of its place before pressing the new one into place using its plastic tabs. Reassemble any other components before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The air filter cover is designed to be used with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.
This is an air filter that is intended for use with chainsaws. An air filter is designed to filter the air to remove any dust, debris, or other harmful contaminants that could harm the engine. A new air filter will be needed with regular use, and should generally be replaced as a part of normal care and maintenance on the chainsaw. Over time, the air filter will become clogged, which will inhibit airflow through the machine. At this time, it is essential to change out the air filter to ensure proper operation. Never perform care and maintenance on an outdoor power equipment machine that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. This air filter is a genuine OEM Husqvarna part. It is sold individually. This specific air filter is compatible with chainsaws that are manufactured by the Husqvarna and the Craftsman brands.
This screw is a genuine MTD part, sold individually. A screw can be used as a replacement part in a chainsaw. The purpose of this genuine OEM part is to pierce and rotate into one or more components such that the stability and placement of those components can be secured within the external or internal machinery of the chainsaw.The screw in a chainsaw might be lost or damaged within the typical lifespan of the appliance. If the screw is lost or damaged, it should be immediately replaced by this genuine OEM replacement part; the same replacement should occur if the screw has suffered enough damage to reduce or negate its typical functionality. Refer to the manual for detailed instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.
This air filter housing is a genuine Husqvarna part, sold individually. This air filter housing can be used as a replacement part for a chainsaw. This air filter housing provides stable placement for the air filter; the air filter protects the internal workings of the chainsaw from the accumulation of debris that might cause damage to the engine.The air filter housing might have to be replaced if it suffers damage that prevents it from protecting the air filter of the chainsaw. If the air filter housing is punctured, torn, ripped, or eroded to the point that it exposes the air filter to damage, the air filter housing should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter housing is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.
The chainsaw carburetor mixes air and gas before this mixture makes its way to the engine. If this is not working correctly, the engine receives a less efficient gas supply or no gas supply at all. If your chainsaw has a full tank of gas but will not start or stops just after starting, the carburetor may need to be replaced. While carburetors can be cleaned to get them working again, they often need to be replaced if they have become too clogged. Depending on what you can reuse from your old carburetor, you may need to order new gaskets as well to ensure an airtight seal. A screwdriver, a nut driver, and a socket wrench set may be needed to complete this repair. This chainsaw carburetor is sold individually from other parts, but it does include the primer bulb. It is compatible with Craftsman and Poulan chainsaws. This chainsaw carburetor is a genuine OEM part.
The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.
Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.
Symptoms of a bad Fuel Line include:
This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.
A primer bulb is a small rubber button-like component. This essential part pulls fuel through the fuel line and helps fill the carburetor with the right amount of fuel. Pressing the primer bulb will start the fuel flow and combustion. The primer bulb makes starting the engine easier, and without it, undue stress will be placed on the carburetor. There should be a slight resistance when pushing it and it should pop back out after depressing it. If the primer bulb is cracked or is not creating proper suction, replacement is necessary. The rubber material will eventually harden and crack over time. Stale fuel can also cause primer bulb deterioration. To replace a primer bulb, it is best to consult the equipment's manual for diagrams that show the bulb's placement. This is an OEM part made from high-quality material and is manufacturer-approved for use as a replacement. It can be used in lawn maintenance equipment such as string trimmers, leaf blowers, chainsaws, and pole pruners from brands like Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.
This is a complete set of gaskets designed as a set to make the most of chainsaw maintenance and repair. This OEM gasket kit contains seven unique gaskets that should be replaced whenever a chainsaw's motor is serviced or repaired. Gaskets are designed to ensure that fuel remains where it is intended within the engine and parts and does not leak or seep into other areas. The pressure is maintained in the machine through the use of effective gaskets and seals. This is a complete kit and comes with every gasket needed for chainsaws made by Craftsman, Husqvarna, Poulan, and McCulloch, among others. It does not come with any associated parts necessary for full chainsaw maintenance and will require disassembly of several systems to install the new gaskets.
This muffler kit can be used as a replacement part in chainsaws. It provides all the necessary pieces for muffler installation. On chainsaws, the muffler's purpose is twofold: it quiets noise, and it redirects the chainsaw's exhaust away from the user. The clearest sign that a muffler needs to be repaired or replaced is a change in noise level. Strange odors are another symptom of a damaged muffler, in which case the muffler should be removed and replaced immediately. A final symptom of damage in a muffler is reduced fuel economy, which can be attributed to a number of other factors but can point to muffler damage if paired with a change in noise or a strange odor. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This muffler kit is a genuine Husqvarna part, sold individually. It is compatible with the following brands: Husqvarna, Poulan, and Craftsman.
This is a genuine replacement spark arrestor kit that is used with certain styles and models of chainsaws. The spark arrestor kit will attach to the cylinder gasket and is designed to catch any particles that are coming from the engine that are hot or likely to create a fire risk. This ensures that the internal combustion engine can operate effectively. When the spark arrestor is damaged or worn, or if pieces go missing, it will not be able to give the engine the protection from flammable debris that it needs. A replacement is necessary for the safe operation of the chainsaw. This OEM authentic spark arrestor kit is manufactured by Poulan and compatible with over 50 of the chainsaws that are made by the brand. This kit includes the screen, the metal arrestor, and the nut that connects the components and helps secure the entire assembly to the engine's cylinder gasket. This part replacement will require a nut driver and a set of pliers. Allow the engine to cool completely and always disconnect the spark plug when performing engine repairs or internal replacements. Owners will want to wear gloves for hand protection, as well.
This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.
This replacement part is an insert transfer and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Insert transfers are small but very important to many different appliances like chainsaws. These parts reduce friction inside of the motor and piston. Without this part the engine could become damaged.A new insert transfer might be needed if the user hears noises coming from the equipment that are not normal. If there is excess heat coming from inside the appliance this might also be the cause. It is common that insert transfers become stripped overtime due to normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
This replacement part is a crankshaft and rod assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This crankshaft and rod assembly is used in chainsaws and helps the appliance operate smoothly. A new crankshaft and rod assembly might be needed if the current one is visibly damaged or missing. Be sure to refer to the proper owner's manual and guide for more detailed and specific instructions on replacing this part. Note that the engine should be completely turned off and cooled down before starting this repair. This crankshaft and rod assembly is made of durable material and is compatible with many types of appliances. This is a genuine OEM replacement part to ensure proper fit and long lasting use. This part is sold individually and is sourced directly from the manufacturer. Be sure to check the part number to ensure the correct item is purchased.
This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.
This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.
Combustion engines operate because of the chambers that seal in the tiny explosions caused by fuel, air and a spark. The pistons are part of the process of taking power from those explosions, and the piston rings seal the combustion chamber so that all of the gases created remain inside of the engine's crankcase. This replacement piston ring will ensure that a chainsaw's engine can do that, as well as maintaining the right amount of oil between the piston and the cylinder wall. An OEM replacement part, this piston ring works with Craftsman and Husqvarna chainsaws, among others. It will require a wrench set, screwdriver and a pair of pliers to make the replacement. Sold individually.
This replacement part is a transmission insert and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This transmission insert is used in chainsaws and allows the transmission to operate smoothly. A new transmission insert might be needed if the current one is damaged or missing. If there are noises coming from the inside or the appliance won't stop or start properly, it might be due to a bad transmission insert. Be sure the engine is completely turned off before attempting to start this repair. Because this part is close to other areas that can be dangerous, it is recommended that the user wear work gloves during the job to prevent injury. This transmission insert is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit. This part is sold individually.
This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective, misplaced, or stripped screw in outdoor power equipment. Screws are a standard piece of equipment hardware with different uses. They help to secure parts of the equipment together properly. If a screw becomes corroded, stripped, misplaced, or is otherwise defective, then it should be replaced. Wear work gloves and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.
This part is specifically designed for use with chainsaws. This tube intake is designed to create a flexible path between the adapter and carburetor, ensuring efficient equipment functionality. If the tube intake becomes worn, detached, or cracked, the carburetor may not be able to properly mix the correct ratio of air and fuel, causing the engine to misfire or underperform. This tube intake is a genuine OEM replacement part that has been sourced directly from the manufacturer. This tube intake is designed to fit various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.
This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.
This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.