Parts for Poulan PP4818A: Shield / Cylinder / Muffler Parts

This replacement part is an air filter cover and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Air filter covers are an important part to most lawn equipment. This specific part is intended to shield the air filter so that no dust or debris can get inside of it.A new air filter cover might be needed if the current one is damaged or broken in any way including being cracked or dented. It is possible that the airbox cover can become broken after years of normal wear and tear as typically they are exposed to rough terrain. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.

This part is a replacement spring ignition switch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or faulty spring ignition switch in a variety of gas chainsaw models.This part is essential for applying tension to the throttle control lever. If the spring ignition switch is malfunctioning, the chainsaw will not work properly, and the user will not have sufficient control over the throttle. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. Proper tools are required to replace this part. For more accurate information on how and where to install this spring ignition switch, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this spring ignition switch is suitable for use on several different models of gas chain saws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

This throttle control lever is a genuine Husqvarna part, sold individually. This throttle control lever can be used as a replacement part in a chainsaw.The throttle control lever could suffer from general wear and tear with long-term use or could be permanently damaged due to a collision with a hard object such as a rock, a curb, or a landscaping block. If this occurs, the throttle control lever should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This throttle control lever is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This choke knob is a genuine Husqvarna part, sold individually. This choke knob can be used as a replacement part in a chainsaw. The purpose of the choke knob in a chainsaw is to regulate the air pressure let into the intake manifold, which adjusts the airflow into the carburetor.The choke knob in a chainsaw might have to be completely replaced if the airflow can no longer be properly regulated by this vital component. This could occur if the choke knob is punctured, ripped, torn, dented, cracked, chipped, or damaged to the point of general lack of functionality. If this occurs, the choke knob should be removed and replaced by this genuine OEM replacement part before using the chainsaw again.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This choke knob is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This pleated filter or filter pleat is an OEM replacement part designed specifically for use in chain saws and gas chain saws made by Craftsman, Husqvarna, and Poulan, among others. The filter is designed to capture any debris or dirt from the air before it makes its way into the carburetor and engine. Any debris can cause the engine to malfunction or idle unevenly. This can also prevent proper cooling and allow engine overheating or damage. Replacing the filter is easy and requires a screwdriver and socket set. After the machine cools completely, remove the cover. Next the filter pleat is removed and replaced with this replacement part. Then, replace the cover. This part ships individually without any hardware or other components and is made of long-lasting, effective materials.

This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.

The air valve assembly here can work with certain models of chainsaws. The air valve is positioned next to the carburetor on the chainsaw. It will control the airflow from the air filter housing into the carburetor. It ensures that there is a proper amount of air so that the chainsaw can start and operate properly. If there is a problem with the air valve, it could cause problems getting the chainsaw started or it could have trouble continuing to run.The air valve assembly is made from metal and plastic. It is built to last, but there is the chance that it could break or corrode over time. Replace the air valve if there are any issues before they worsen. A screwdriver will be needed to replace the part. Be sure the chainsaw is cool before working on it. They may want to remove the chain to reduce the risk of injury.The air valve assembly will work with select models of chainsaws from Poulan and Husqvarna. It is a genuine OEM replacement part, and it is sold individually.

The carburetor is the part of the chainsaw that mixes air from the intake valve system and gas before the fuel mixture goes to the engine. This ensures that the chainsaw is capable of continuing to run while it is in use. A bad carburetor will cause problems with how the chainsaw runs, and it may stop running during work. If the engine does not start when the tank is full of fresh fuel, test the carburetor. Start by removing the air filter and pouring a teaspoon of fuel onto the carburetor. Then, pull the starter rope to start the engine. If the engine starts but quickly dies, it means that the carburetor will likely need to be replaced. The replacement of the new carburetor is fairly simple. Remove the rear cover on the chainsaw to remove the old carburetor. Once you have removed the old carburetor, you can then install the new carburetor. Replace the cover and test the chainsaw. This is an OEM sourced part that will work with several models of chainsaws from Poulan and Craftsman.

A primer bulb is a small rubber button-like component. This essential part pulls fuel through the fuel line and helps fill the carburetor with the right amount of fuel. Pressing the primer bulb will start the fuel flow and combustion. The primer bulb makes starting the engine easier, and without it, undue stress will be placed on the carburetor. There should be a slight resistance when pushing it and it should pop back out after depressing it. If the primer bulb is cracked or is not creating proper suction, replacement is necessary. The rubber material will eventually harden and crack over time. Stale fuel can also cause primer bulb deterioration. To replace a primer bulb, it is best to consult the equipment's manual for diagrams that show the bulb's placement. This is an OEM part made from high-quality material and is manufacturer-approved for use as a replacement. It can be used in lawn maintenance equipment such as string trimmers, leaf blowers, chainsaws, and pole pruners from brands like Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This is a replacement chainsaw fuel line kit that is compatible with a range of chainsaw models. Fuel lines are tubes used to feed fuel to the carburetor and to return unused fuel into the chainsaw's gas tank. If there is damage to the fuel line, it could present large problems including leaks. This will waste fuel and it can be dangerous. If there are issues with the fuel line, replace it right away.The plastic tubes can start to wear down over time. They might crack and break, or they may no longer have tight connections. Make sure that the chainsaw engine is cool before starting any repairs.The replacement chainsaw fuel line kit will work as a replacement for select models of chainsaws from Husqvarna and Craftsman. The kit is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a gasket kit intended to replace three interior engine gaskets for several models of gasoline-powered Craftsman chainsaws. Chainsaws are particularly rugged power tools that see a great deal of pounding and dropping, as well as engine vibrations. All of these routine usage events result in wear and tear on the moving parts of the engine. Beyond sharpening the chain, keeping the air filter and carburetor working, sometimes it becomes necessary to replace internal engine parts, as well. Signs that the interior gaskets need to be replaced are a loss of power, an inability to get adequate RPMs from the engine to cut through wood, and continued leaking of oil from the engine manifold. The three gaskets in question, the cylinder gasket, intake gasket, and exhaust gasket, should all be replaced at the same. Whenever a sealed part of the engine is removed, the gasket that secures it to the rest of the engine should be replaced to assure air and oil tightness. Make certain when replacing these parts to use genuine OEM replacements like these. OEM parts are manufactured according to the specifications of the original parts and thus are a perfect match.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective, misplaced, or stripped screw in outdoor power equipment. Screws are a standard piece of equipment hardware with different uses. They help to secure parts of the equipment together properly. If a screw becomes corroded, stripped, misplaced, or is otherwise defective, then it should be replaced. Wear work gloves and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.

This is a gasket kit intended to replace three interior engine gaskets for several models of gasoline-powered Craftsman chainsaws. Chainsaws are particularly rugged power tools that see a great deal of pounding and dropping, as well as engine vibrations. All of these routine usage events result in wear and tear on the moving parts of the engine. Beyond sharpening the chain, keeping the air filter and carburetor working, sometimes it becomes necessary to replace internal engine parts, as well. Signs that the interior gaskets need to be replaced are a loss of power, an inability to get adequate RPMs from the engine to cut through wood, and continued leaking of oil from the engine manifold. The three gaskets in question, the cylinder gasket, intake gasket, and exhaust gasket, should all be replaced at the same. Whenever a sealed part of the engine is removed, the gasket that secures it to the rest of the engine should be replaced to assure air and oil tightness. Make certain when replacing these parts to use genuine OEM replacements like these. OEM parts are manufactured according to the specifications of the original parts and thus are a perfect match.

This part is a cylinder kit that is used on chainsaws. The cylinder is the component of the engine that houses the piston. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.A new cylinder kit may be needed if the chainsaw is vibrating excessively, if the engine is misfiring, or if the chainsaw loses power during use. Over time, the cylinder may become worn so that it does not operate correctly. The cylinder may need to be replaced after normal wear and tear after a period of time. The cylinder is an essential component for the operation of a chainsaw. Never perform care and maintenance on outdoor power equipment that is powered on.This cylinder kit is a genuine Husqvarna part. It is sold individually. This particular cylinder kit is compatible with chainsaws that are manufactured by the Husqvarna and Poulan brands.

This part is a piston kit that is used on chainsaws. A piston is a moving component inside of the cylinder on a gas-powered chainsaw that moves forward and back at up to 14,000 RPM. The piston can idle at a much lower RPM which allows the chainsaw to remain on without the chain being engaged.A new piston kit may be needed if the engine is unable to achieve sufficient RPM to engage the clutch and turn the chain around the bar. The replacement process is not an easy one, so it is recommended that a trained repairman replace this part. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This piston kit is a genuine Husqvarna part. It is sold individually. This specific piston kit is compatible with chainsaws that are manufactured by Husqvarna, Craftsman, and Poulan.

This piston ring is a genuine Husqvarna part, sold individually. This piston ring can be used as a replacement part in a chainsaw. The purpose of the piston ring in a chainsaw is to seal off the combustion chamber from possible fuel leakages as well as to ensure the proper transfer of heat from the piston into the cylinder.The piston ring might have to be replaced if it suffers from signs of clear damage. This damage could manifest in the form of white or gray smoke pluming from the exhaust, reduced fuel economy, reduced acceleration ability, and overall weakened performance of the appliance. If any of these symptoms occur and are attributable to damaged piston rings, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. The operator of the appliance should be aware that this component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This piston ring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.

This crankshaft assembly is a genuine Husqvarna part, sold individually. This crankshaft assembly can be used as a replacement part in a chainsaw. The purpose of the crankshaft in a chainsaw is to channel the linear motion created by the pistons so that it can be transmitted into rotational motion that powers on the propulsion of the appliance.The crankshaft assembly in a chainsaw might have to be replaced if the crankshaft assembly suffers damage that renders it incapable of performing its typical function. If the crankshaft assembly is punctured, dented, cracked, chipped, scraped, warped, or eroded, the crankshaft assembly should be removed and replaced by this genuine OEM replacement part before using the chainsaw again in order to ensure safe use of the appliance at all times. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This crankshaft assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This is a high-quality assembly seal and bearing that is used on chainsaws by several manufacturers. The purpose of the ball bearing is to reduce friction between various moving parts in a chainsaw or another tool. The component is also used to stabilize and hold the position and angle of specific parts in lawn and garden equipment. The assembly seal and bearing experience substantial wear and may need to be replaced regularly. When replacing the assembly seal and bearing in a chainsaw, basic tools will be needed. A screwdriver, a pair of pliers, a socket set, and an impact wrench may be required for the process. First, take the chainsaw and place it on a stable and level surface. Make sure it is powered off before disconnecting the spark plug wire. The engine will need to be removed to replace the bearing and its seal. Test the tool before further use.This assembly seal and bearing are designed for use with Husqvarna, Craftsman, and Poulan chainsaws. The part is sold on an individual basis with one seal and one bearing. It is a genuine OEM replacement component that is directly sourced from the manufacturer.

This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.

This is a gasket kit intended to replace three interior engine gaskets for several models of gasoline-powered Craftsman chainsaws. Chainsaws are particularly rugged power tools that see a great deal of pounding and dropping, as well as engine vibrations. All of these routine usage events result in wear and tear on the moving parts of the engine. Beyond sharpening the chain, keeping the air filter and carburetor working, sometimes it becomes necessary to replace internal engine parts, as well. Signs that the interior gaskets need to be replaced are a loss of power, an inability to get adequate RPMs from the engine to cut through wood, and continued leaking of oil from the engine manifold. The three gaskets in question, the cylinder gasket, intake gasket, and exhaust gasket, should all be replaced at the same. Whenever a sealed part of the engine is removed, the gasket that secures it to the rest of the engine should be replaced to assure air and oil tightness. Make certain when replacing these parts to use genuine OEM replacements like these. OEM parts are manufactured according to the specifications of the original parts and thus are a perfect match.

This genuine OEM replacement ignition module is a type of electric switch used to send signals to the ignition cable and create a spark to fire up the engine in a gas-powered chainsaw. When the ignition coil creates a high-voltage charge, it triggers the spark plugs to create a spark and ignite some fuel so the engine will start. The ignition is usually one of the first things to check if an appliance's engine does not start, after checking for fuel and then the spark plugs. If the spark plugs are fine, though, the problem is likely to do with another part of ignition, namely the ignition module. As it is located near a high-voltage region of the ignition, the switch can fry and will need to be replaced. Using a pair of pliers, a screwdriver, and a wrench set, switch out the faulty ignition module and test the engine to see if it starts. This replacement ignition module is compatible with Craftsman chainsaws and does not include any addition hardware. As a high-quality part, it comes sourced directly from the original manufacturer.

This replacement part is a screw. This part is a genuine replacement part made by Husqvarna. Screws are small but important in many different types of machinery. Screws are able to hold different parts in place and help them stay secure during use so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is missing or damaged in any way. It is possible that the screw can become stripped over time and therefore not stay in place properly. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. Note that This is a genuine OEM replacement part.

This is a gasket kit intended to replace three interior engine gaskets for several models of gasoline-powered Craftsman chainsaws. Chainsaws are particularly rugged power tools that see a great deal of pounding and dropping, as well as engine vibrations. All of these routine usage events result in wear and tear on the moving parts of the engine. Beyond sharpening the chain, keeping the air filter and carburetor working, sometimes it becomes necessary to replace internal engine parts, as well. Signs that the interior gaskets need to be replaced are a loss of power, an inability to get adequate RPMs from the engine to cut through wood, and continued leaking of oil from the engine manifold. The three gaskets in question, the cylinder gasket, intake gasket, and exhaust gasket, should all be replaced at the same. Whenever a sealed part of the engine is removed, the gasket that secures it to the rest of the engine should be replaced to assure air and oil tightness. Make certain when replacing these parts to use genuine OEM replacements like these. OEM parts are manufactured according to the specifications of the original parts and thus are a perfect match.