Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Carburetor assembly for snow throwers. Mounts to the engine block to mix air and fuel. Replace if cracked, leaking, or worn to restore proper operation.
This is a carburetor rebuild kit that includes the gaskets, diaphragms, and small components needed to restore a worn or malfunctioning engine carburetor. It is designed for small engines commonly found on lawn and garden equipment. Replace using this kit if the engine is hard to start, runs rough, surges, stalls, or if fuel is leaking from the carburetor.
Carburetor assembly for snow throwers and gas snowblowers. Installs on the engine to mix air and fuel. Replace if cracked, leaking, or corroded.
The drive V-belt, manufactured by Craftsman, is used in one- and two-stage snow blowers as well as tillers. This is a drive belt that connects the engine to the auger of the tiller or snowblower via a pulley at either end. This turns the blades of the tiller or the auger blades of the blower to expel snow. As a flexible, hardened rubber part connecting other moving parts, a V-belt is considered “replaceable,” meaning that users should expect to have to replace this part during normal use of the equipment. Signs that a drive V-belt may be going bad are a squealing sound when the blower's auger or the tiller's blades are first engaged, or if the auger is slow to engage and loses power during use. To replace the V-belt, the equipment must be secured and the spark plug caps removed. Tilt the device to reveal the location of the belt. It must detached from the engine pulley and the transmission pulley. When replacing the V-belt, before tightening the pulley, make sure all moving parts are properly aligned. This genuine OEM part is compatible with machines sold by MTD, Yard Man, Craftsman, and Yard Machine.
This V-belt rotates the auger and impeller on your snow blower. Replace when worn, cracked, or slipping to restore throwing performance. Verify fit.
The variable speed belt goes around the engine pulley and the variable speed pulley. It is used on machines that have variable speed pulley drives and that need to be able to operate at different speeds. hese belts will wear down over time and need to be replaced. If the belt breaks, stretches too much or is worn down, replace it with a v-belt that fits properly. A screwdriver, pliers, socket set, and a wrench set will be needed to replace the belt. This is a genuine OEM part for lawn tractors, as well as other types of equipment with variable speeds, such as a snowblower, tiller, wood chipper, or log splitter. It is sold individually, and it will work on lawn tractors from many brands, including Ryobi, MTD, Craftsman, Yard Machines, Yard-Man, Turf King, and Mastercut.
Drive belt transfers power from engine to wheels on self-propelled mowers and snow blowers. Replace if slipping, worn, or cracked. Verify fit by model number.
This is a rubber V-belt designed for use in lawn and garden equipment drive systems. It transfers power from the engine pulley to the blade or drive mechanism, keeping the equipment operating smoothly. Replace this belt if it is cracked, frayed, stretched, or if the mower loses drive power or the blades fail to engage properly.
This V-belt is designed for use in snowblowers by several major manufacturers. It is used to rotate the blades in the blower and acts as the primary belt for the device. These belts are made of a rubber material, which means they can sometimes stretch out, break, or wear down. If this occurs, the V-belt needs to be replaced to ensure the snowblower continues to work at its best.The more frequently a snowblower is used, the more likely it is that a replacement V-belt will be needed. In some cases, a V-belt can wear out more quickly than expected due to faults like mechanical failures. When the belt is overly worn, it can cause the snowblower to act sluggishly since the belt can slip off of the pulley. If the belt breaks, the snowblower will no longer be able to operate. When replacing the belt, drain the fuel and remove the spark plug for a safe repair.This V-belt is a genuine OEM replacement part that is sourced directly from the manufacturer. It's made for use with snowblowers by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold as an individual component.
Drive belt for gas snowblowers and snow throwers. Replace if you notice slipping, cracking, or loss of power during operation. Verify fit with your model.
If your snow blower won't self-propel or drive forward, a worn friction wheel assembly is often the cause. This drive system transfers power to the wheels.
If your snowblower controls are unresponsive or broken, this control assembly restores full operation. Located at the handlebar for easy access.
Replacement shear pin for snow thrower auger assembly. Installs between auger and drive shaft to protect transmission. Replace if broken or missing.
A shear pin or shear bolt is specially made to provide auger connection to the shaft. When a foreign object comes in contact with the machine's moving part, the shear pin will break away. By doing so, the snowblower's auger system, as well as the gearbox, is safe from sustaining damage. This unique function of a shear pin means that it will need to be replaced sooner or later. To keep the shear pin in place, a retainer is inserted through. In some cases, when you hit a hard object, the retainer will bend and also need to be replaced. Replacement is easy. First, turn off the snowblower and let its engine cool down. Then, locate the bolts and remove them using a wrench. Insert the replacement. Make sure to align it properly. For replacement shear pins with retainers, you can get this genuine MTC replacement. It is compatible with snowblower models from MTD, Craftsman, Huskee, Yard-Man, Cub Cadet, Yard Machines, and Troy-Bilt snowblowers. These shear pins are original MTD-made products. Four shear pins with four retainers are included.
Shear pin kit for lawn tractor drive systems. Replaces broken or sheared pins that protect drivetrain components. Includes hardware for installation.
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.