Spindle

The Lawn Mower Spindle Assembly is an OEM part for MTD lawn mowers Located in the mower's lower deck, the spindle assembly connects the blade to the drive belt. This enables the mower to cut grass effectively. This assembly is comprised of an adapter and a spindle. It gets activated as a pulley spins the drive belt. While designed to withstand minor impacts, larger or harder objects may cause damage. Damage can lead to blade misalignment or detachment.

You should replace the spindle assembly if it becomes damaged due to impacts with rocks, roots, or other hard objects, or if it wears out over time from regular use. A faulty spindle assembly can lead to uneven cuts, excessive vibration, and potential damage to other mower components.

Symptoms of a bad spindle assembly include:

• Uneven or missed areas of grass during mowing
• Excessive vibration or wobbling of the mower deck
• Unusual noises such as grinding or squealing
• Blades not spinning properly or at all

This OEM part is compatible with various brands under MTD, including Cub Cadet, Troy-Bilt, Yard Machines, Bolens, and some Craftsman models.

This is a greaseable mandrel kit, also called a blade spindle assembly. It is the part of a riding lawnmower where the blade assembly fits. It's attached to the bottom of the engine with four self-tapping screws, which assure the stability of the spindle when the blades are turning. The mandrel assembly is a part of the riding mower that is intentionally meant to be the most breakable. This is by design, so the other, more expensive, more challenging to repair parts are spared. As a result, mandrels often need to be replaced. If you have to replace the mandrel, first take off the blade assembly and the mandrel cover. After removing the nut holding the pulley in place, remove the pulley. From there, it’s just a matter of unscrewing the four bolts holding the mandrel to the cutting deck. Replace the original mandrel with the new unit and walk back through the disassembly instructions. This is a genuine OEM part manufactured by Husqvarna and Poulan. The mandrel is also compatible with Ariens, Dixon, and Craftsman. This OEM part is sold individually.

This is a replacement mandrel assembly used for mowers. The mandrel assembly is one of the most important parts of the machine. This is the part that houses the shaft that the mower blades attach to. The mandrel assembly is mounted to the deck of the mower. The mandrel assembly is made from metal and it tends to be durable. However, it may need to be replaced at some point for any number of reasons. There could be corrosion, or it might no longer be functioning properly because of damage. Regardless of the reason the assembly is not working properly, it will need to be replaced to ensure the machine has full functionality. The replacement is relatively simple to do, but it should be noted that the bolt holes do not come tapped. The genuine OEM replacement part is high-quality and is sold individually. It does not come with the four bolts that will be needed to attach it to the deck. This part is used for lawn mowers and riding mowers. The brands compatible with the part include Craftsman, Husqvarna, and Poulan.

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

This is a replacement fixed line cutting head. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken, worn, or defective fixed line cutting head on various trimmer models. The cutting head cuts through weeds, plants, and grass. Due to the amount of contact this part has with the ground, rough surfaces, and debris, it can easily become worn and require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part. For more accurate information on how and where to install this fixed line cutting head, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fixed line cutting head is suitable for use on several different models of string trimmers manufactured by Husqvarna, WeedEater, and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This spindle assembly is a genuine MTD part, sold individually. This spindle assembly can be used as a replacement part for a lawn mower. The spindle assembly comes with all of the necessary components required to install the spindle. The purpose of the spindle is to rotate the blades so they cut the grass and greenery evenly when in operation.If the spindle is punctured, torn, or otherwise eroded from general wear and tear with long-term use or from a direct impact with a hard object, it should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spindle assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman.

This part is a replacement mandrel assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective mandrel assembly in a variety of lawn tractor models. The mandrel assembly attaches to the deck of the tractor and is what helps to rotate the blades. If this part is broken or faulty, the blades may not spin, thus it will need to be replaced as soon as possible. It's important when working on or near to any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this mandrel assembly, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this mandrel assembly is suitable for use on several different models of lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a spindle pulley, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Spindle pulleys work with other parts of the engine to help create the turning or spinning mechanisms inside the machine. A new spindle pulley might be needed if the turning mechanism inside the machine is not working to standard. The spindle pulley works with other devices in or near the engine so that the entire appliance runs smoothly. It is possible that the spindle pulley can become stripped overtime. Be sure the engine is completely shut down before attempting to replace this part. This part is sold individually. Some appliances may require more than one spindle pulley so be sure to purchase the correct amount. This is a genuine OEM replacement part.

KIT HSG ASM 52/61