Spindle

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This spindle assembly is made to be used with string trimmers. It is located on the mower's cutting deck and is responsible for working with the pulleys to ensure the blades rotate so the grass in a lawn is evenly cut. If the spindle assembly has parts that are broken, bent, or otherwise damaged, the part will need to be replaced. Signs that there may be an issue include blades that spin in an uneven manner or blades that stop spinning entirely.When replacing the spindle assembly, make sure the lawnmower is on a level surface, the brake is engaged, and the ignition has had the keys removed. The spark plug wire should also be removed for safety. Wearing a pair of work gloves will help protect the hands from the sharp edges of the mower blades. Remove the blade and pulley from the spindle and replace the broken part with the new spindle assembly. Reinstall the other parts before use.This is an authentic spindle assembly that is directly sourced from the manufacturer. It is sold as a single part. The component is made for use with a variety of string trimmers manufactured by MTD and Cub Cadet.

This is a jackshaft housing used in several types of Murray lawn and garden equipment. The housing connects to the drive shaft which then connects to the pulley that is driven by the engine and various belts. The blade, blade adapter, blade nut, and washers are connected to the drive shaft under the jackshaft housing. In some cases, the jackshaft housing can become damaged or broken and will need to be replaced.If the jackshaft housing has a crack, holes, or other damage, replacement starts with removing the nut from the jackshaft pulley. Remove the bolts from the jackshaft housing so it can be removed. The new jackshaft housing can be replaced using self-tapping bolts. Attach the pulley to the shaft and tighten the nut. Next, the blade can be installed. The deck can be removed from the machine to make it easier to reach the needed components.This is a genuine OEM replacement jackshaft housing sourced directly from the manufacturer. It's compatible for use with lawnmowers and string trimmers created by Murray. It is sold as an individual part. It comes with a bearing and a zerk fitting.