Valve & Float

This control valve is a genuine MTD part, sold individually. This control valve can be used as a replacement part for a log splitter or a wood chipper. The purpose of the control valve for a log splitter or a wood chipper is to facilitate and regulate the motion of the cylinder head.The control valve might eventually have to be replaced at some point within the standard lifespan of the equipment if the component is not functioning as it usually does. This could occur if the control valve has suffered damage that has rendered it broken, malfunctioning, or in some state of disrepair. If this is not able to be fixed by basic repair, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This control valve is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Yard Man, Bolens, Ryobi, Craftsman, Yard Machines, and MasterCut.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.

This valve stem is a genuine Husqvarna part, sold individually. This valve stem can be used as a replacement part in a lawn mower or an edger. The purpose of the valve stem in a lawn mower or an edger is to allow the flow of fuel and air into the carburetor of the appliance so that it can be mixed in the proper ratio to feed to the spark plugs and ignite the engine.The valve stem in a lawn mower or an edger should be replaced if the valve stem has been damaged. This could occur if the valve stem is punctured, dented, torn, scraped, warped, or eroded to the point that it cannot serve its usual function of sealing and opening up the combustion chamber of the appliance. If this occurs, the valve stem should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This valve stem is compatible with the following outdoor appliance brands: Husqvarna.

This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a log splitter valve, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This log splitter valve is used in log splitters and helps shunt oil from the pump of the machine to the base of the cylinder. This causes the splitter to extend and assist in the log splitting mechanism. A new log splitter valve might be needed if the current splitting mechanism is not working properly. This means that the valve is malfunctioning and might need to be replaced. Be sure the device is completely powered down and cooled off before replacing this part. Log splitters can be dangerous so also be sure to wear working gloves while completing this job.This is a genuine OEM replacement part and is told individually. This part is sourced directly from the manufacturer. Reference the appropriate user guide for more specific instructions on how to replace this part.

This valve spring retainer is a genuine OEM replacement part that is designed for use with select snowblowers and snow throwers. The valve spring retainer is responsible for holding the valve spring in place, which then controls the valvetrain. The retainer secures the spring so that it can provide the right amount of pressure to ensure that the system can operate without valve b, which can damage the engine or cause faulty operation. If the valve spring retainer fails or is damaged, which can happen with regular use over time, it will need to be replaced to ensure the spring remains in place during the operation of the machine. The retainer is a metal collar-type piece and although it is durable, it could wear out or break due to several different potential situations. Regardless of the cause, a replacement must be made with an OEM part like this. This genuine part is manufactured to specific OEM standards by MTD, and is compatible with more than 150 units from MTD, Yard Machines, Yard Man, Troy-Bilt, Husky, and Cub Cadet. It is sold individually. Be sure to wear gloves and allow the unit to cool completely before performing any type of repairs.

This part is a replacement breather valve. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, lost, or defective breather valve in a variety of outdoor power equipment models.Breather valves are essential for keeping the engine in proper working order. They can easily become lost, worn, or otherwise rendered ineffective and thus should be replaced with a genuine OEM part. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this part, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this breather valve is suitable for use on several different models of outdoor power equipment models manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

Husqvarna fuel tank vents are found in several of the chainsaws made by the Husqvarna company. The function of the fuel tank vent is to allow air into the fuel tank. It prevents a vacuum from being created while the fuel is being sent through the fuel line. When the fuel tank vent is no longer functioning correctly, there will be problems with the performance of the chainsaw. This can happen as a result of use and normal wear and tear. If the fuel tank vent malfunctions, a replacement part is necessary.Replacing a Husqvarna fuel tank vent is a simple repair. It requires no specialized tools to complete. Wear gloves and be sure that the chainsaw is cool before starting. Locate the old fuel tank vent on the fuel hose and disconnect it. Put the new replacement fuel tank vent in place.The Husqvarna fuel tank vent is a genuine OEM part. It is supplied directly from the manufacturer. It is sold as an individual piece. The fuel tank vent is made from a high-quality, durable plastic material. It is only compatible with Husqvarna brand equipment. It can be installed in many different models of chainsaws and saws made by the Husqvarna manufacturer.