We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Show parts
Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.
This part is discontinued by the manufacturer and is no longer available for purchase.
Washer top panel that installs on the cabinet to complete the exterior. Replace if your existing panel is cracked, rusted, corroded, or damaged.
Usually ships within 4 - 14 days
White top-load washer lid assembly that replaces cracked, dented, or discolored lids. Restores a secure, finished top and proper lid engagement.
These lid bumpers are sold individually.
Secures and guides your washer door for smooth opening and closing. Replace when the hinge is cracked, broken, or worn, causing door misalignment or sagging.
The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.
Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.
Symptoms of a bad washer lid screw include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Washer won't start because lid won't lock? This lid latch strike secures the washer lid during operation. Simple DIY fix in under 30 minutes.
This factory screw secures panels, brackets, and other components in your appliance. Replace a missing, stripped, or corroded fastener to restore a tight fit and keep parts properly aligned and rattle-free.
This is a bleach dispenser cup or tray that fits into the washer's dispenser housing and holds liquid bleach until it is automatically released into the wash cycle at the appropriate time. It ensures bleach is diluted and distributed evenly rather than being poured directly onto clothing. Replace this dispenser if it is cracked, stained beyond cleaning, or if bleach is not dispensing properly during the wash cycle.
Plastic trim bezel that mounts around the lid lock on your top-load washer's panel. Replace if cracked, broken, or missing to restore a clean finish.
This is a small bearing that fits into the right-side lid hinge on a top-load washer, allowing the lid to pivot open and closed smoothly. It reduces friction and wear on the hinge assembly. Replace this bearing if the lid feels stiff, wobbly, or makes grinding or squeaking noises when opening or closing.
Used from harness to top.
Lid won't lock or keeps clicking? This washer lid latch assembly fixes locking failures. DIY-friendly repair with video guide, typically done in 30-45 minutes.
Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.
Cushions components to reduce vibration, noise, and wear in your washer. Replace when pads wear, fall off, or noise increases. Confirm fit with model number.
Main outer cabinet housing for washers. Replaces cracked, dented, or damaged exterior panels. Provides structural support and finished appearance.
Replacement cabinet support brace that reinforces your laundry center's internal structure. Needed when the original is cracked, bent, or missing.
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Washer lid won't lock or stays locked? This tension spring restores proper locking action. Simple DIY fix when the lid lock clicks or flashes continuously.
Adjustable leveling leg screws into washer base to stabilize and level your machine on uneven floors. Replace worn, missing, or damaged legs for stability.
Replacement washer lid hinge that connects and supports the top lid. Needed when the existing hinge is cracked, broken, or no longer holds the lid properly.
Screw: 8-16 x 3/8 inch.
Molded protective cover that shields wiring from heat and abrasion in laundry centers. Replace if cracked, broken, or missing to protect wires safely.
The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.
Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads.
Symptoms of a bad screw include:
This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Sound-dampening foam padding attached to the interior walls of the washer cabinet to reduce noise and vibration. Replace if your washer has become noticeably louder during operation or if the padding appears compressed or damaged.
Flexible tube that drains used water from your washer tub to the standpipe. Replace if cracked, leaking at connections, or torn along the length.
Secures U-shaped drain hoses or heating elements in washers. Replace if cracked, broken, or missing to prevent hose movement and potential leaks.
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.
Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.
Symptoms of a bad mounting screw include:
This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.