Tractor

Shoulder screw for lawn mowers and tractors. Secures parts in place during operation. Replace if sheared off, stripped, or missing for safe use.

Fastener pin that secures nuts and bolts in lawn mower engines and assemblies. Replace if bent, missing, or damaged during maintenance or repair work.

This is a simple extension spring with an outside diameter of 0.38 and a slack length of 2.5. It is primarily used as an extension spring for snowblowers, but may be compatible with other lawn equipment. It’s designed to apply tension as the throttle is applied. The more gas there is, the more resistance will be present. Under most circumstances, replacement is easy. When the spring breaks or gets rusty, look at both points of attachment. Memorize where it’s attached, or take a picture, and remove the old spring using a pair of pliers if necessary. Install the new spring and the tool is ready to use. This is an OEM part sourced directly from MTD, and it is sold individually. It’s black in color and was initially designed for Troy-Bilt lawnmowers. However, because this is a versatile part, it has since been repurposed for a number of MTD and related machines in other brands. These include lawn tractors and snowblowers, as well as lawnmowers, in brands such as Ryobi, Yard Machines, Husky, and Cub Cadet.

Replacement muffler for lawn tractors. Installs on the exhaust system to reduce engine noise. Order a new one if your original is rusted, cracked, or damaged.

Replacement discharge chute deflector for 30-inch deck lawn tractors. Installs on mower deck to direct grass clippings. Replace if cracked or broken.

Plastic deck wheel for lawn mowers and lawn tractors. Attaches to the mower deck to prevent scalping and provide smooth gliding. Replace if cracked or worn.

This part is a lower steering bracket that is used on lawn tractors and riding lawnmowers. The lower steering bracket holds the steering pump in position. This part is essential for the proper operation of the machine. A new lower steering bracket may be needed if the original is cracked, broken, dented, or damaged in any way. If the steering pump is not being held in position, the steering bracket will need to be replaced. This component may wear out after normal use over a period of time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This lower steering bracket is a genuine MTD part. It is sold individually. This specific lower steering bracket is compatible with lawn tractors and riding lawn mowers that are manufactured by MTD, Craftsman, Yard Machines, Columbia, Murray, and Troy-Bilt.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

Excessive engine noise from your lawn tractor? This muffler reduces exhaust sound and directs fumes safely away. Moderate difficulty repair for quieter operation.

Replace a damaged starter front cover if your engine won't start or cranks poorly. Fits directly over the starter assembly for secure protection.

Oil filter removes harmful contaminants from engine oil to maintain optimal performance. Replace annually or every 100 hours. Confirm fit with your model.

Filters contaminants from engine oil to protect your lawn tractor's engine. Replace annually or per manufacturer schedule. Verify fit with your model number.