Tractor

Battery overcharging or draining quickly? This voltage regulator protects your lawn tractor battery from overcharge and extends its life. Direct fit.

Replacement wheel axle for lawn tractors and garden tractors. Supports wheel rotation and mounting. Replace if bent, worn, or damaged from use.

This blade is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn mowers and lawn tractors to cut grass and weeds. The blade is located underneath the deck of the lawnmower and rotates while the mower is in operation. The blade is sharp on all sides, and when it comes in contact with the grass and weeds, it cuts them. The blade can be sharpened many times before it will need to be replaced with a new blade. Park the lawnmower on a flat surface and remove the spark plug for safety purposes. Wear gloves when working on the lawnmower. Raise the deck to its highest position. Remove the deck from the lawn mower and tilt it on its side to access the blade. Remove the nut holding the blade on the shaft. Take the blade off the shaft and put the new blade on. Tighten the nut. Reattach the deck to the lawnmower. Install the spark plug and test the mower. This blade is a metal part that is sold as an individual unit. It is designed for use in lawnmowers and lawn tractors manufactured by MTD and Yard Machines.

Front deck lift link for lawn tractors. Connects mower deck to front axle bracket for smooth deck height adjustment. Replace if bent, damaged, or worn.

Piston ring set seals the engine cylinder to maintain compression and prevent oil leaks. Replace when you notice power loss, excessive smoke, or oil consumption. Verify fit with your model number before ordering.

Muffler for front-engine lawn tractors and riding mowers. Replaces cracked, rusted, or damaged mufflers. Mounts to the engine exhaust port.

This valve kit is a genuine MTD part, sold individually. This valve kit can be used as a replacement part for a snowblower. The valve kit comes with all of the components necessary to replace the valves of a snowblower. The valve kit comes with a metal needle, a spring clip, and a plastic seal. The valves on a snowblower provide a safe passageway for the fuel to reach the carburetor.Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This valve kit is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Craftsman, Cub Cadet, Yard Machines, Huskee, and Yard Man.

Engine losing compression or making knocking sounds? This piston pin snap ring secures the piston pin in place. A small but critical engine component.

Intake valve seal prevents air and fuel from escaping during engine operation. Replace if you notice oil consumption or reduced performance. Verify fit with your engine model number before ordering.

This is a replacement ex. valve spring retainer for use with snow blowers, lawnmowers, and log splitters. The function of a valve retainer is to fit on top of a valve spring and to keep it in place. This seal ensures that there is no oil leaking into the combustion chamber of the engine. Signs that the valve could be bad or going bad include misfiring, ticking sounds, and compression loss.The metal retainers are built to last, but they could fail over time. They could crack or break, which would affect the performance of the machine. This could eventually cause damage to the engine if it is not replaced.The ex. valve spring retainer This is compatible with a range of models of yard equipment from MTD, Yard Machines, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. This is a genuine OEM replacement part that has been sourced from the manufacturer. It is sold individually.

This is a clutch cover for a lawn tractor. The clutch cover attaches to the flywheel and either connects or disconnects the power through the clutch disc. A well-balanced clutch cover ensures proper rotation and heat radiation. The disc is pressed against the flywheel by the clutch cover to allow for rotation. This is a genuine OEM part and is sold individually. Generally, a clutch assembly should be replaced when there are symptoms of clutch wear. Clutch slippage can manifest by shuddering or shaking, while chirping or grinding noises also indicate there are issues. This indicates that the pressure plate is worn. As a result, all the clutch parts should be replaced together, including the clutch cover. This will ensure proper power to the engine. To replace the clutch assembly, be sure to check the owner's manual, as not all are assembled the same. This part is compatible with several brands, including Cub Cadet, Husky, Troy-Bilt, Yard Machines, and Yard Man.

Engine running louder than normal? This muffler assembly reduces exhaust noise on lawn tractors. Metal construction for long-lasting performance.

Replacement muffler mounting stud for lawn mowers and tractors. Secures exhaust muffler to engine block. Needed when original stud is stripped or broken.

Complete carburetor rebuild kit with gaskets and seals for small engines. Replace when engine runs rough, won't start, or idles poorly. Verify fit.

This is a variable speed pulley, designed as a genuine replacement part for use in select lawn tractors and riding mowers. The variable speed drive pulley is designed to control the drive belt, in combination with the throttle and choke, to help control the engine speed and provide the right level of movement during the mowing process. The pulley is subject to repetitive motion and constant stress, which can cause it to wear. It can become bent or damage from impact, as well. A damaged or broken pulley will cause the engine to malfunction or not work at all, rendering the tractor useless until it is replaced. Using a genuine OEM replacement like this model is essential. This specific drive pulley fits select models from Craftsman, Cub Cadet, Troy-Bilt, and Murray. It is sold as an individual unit. Be sure to disconnect the spark plug before working on the engine. Allow the engine to cool completely and wear gloves for safety. Several tools will be required for this job, including flathead and Phillips screwdrivers as well as a socket or wrench set.

This part is a right-hand brake assembly bracket that is used on lawn tractors. The brake assembly is the component that stops the blade from moving.A new right-hand brake assembly bracket may be needed if the existing bracket is cracked, broken, dented, bent, or damaged in any way. Use extreme caution when attempting to replace any components near the blade of a lawn tractor. Allow the lawn tractor to cool off completely prior to attempting any care or maintenance on any component. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This right-hand brake assembly bracket is a genuine MTD part. It is sold individually. This specific right-hand brake assembly bracket component is compatible with lawn tractors that are manufactured by Yard Machines, MTD, Craftsman, Columbia, Mastercut, Murray, Yard-Man, and Husky.