Trimmer

Throttle housing and trigger assembly for gas line trimmers. Includes plastic housing, trigger, and spring. Replace if cracked, broken, or worn out.

24.932" boom assembly for gas line trimmers. Includes internal drive shaft. Replace if boom tube is bent, cracked, or damaged from impact or wear.

This replacement part is a blade guard, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This blade guard is typically found in edgers and is used to shield the blade so that if something where to happen during use, the person using the appliance and those in the vicinity will be protected from the open blade. A new blade guard might be needed if the current one is damaged or missing from the appliance. If the blade of the edger is completely exposed it is recommended that a replacement blade guard be installed as soon as possible. This part is used to protect the user and those around them while using the appliance.This blade guard is sold individually and is a genuine OEM part. Be sure to wear gloves while attempting to replace this part as the user will be working close to the blade of the appliance.

17-inch guard and blade assembly for gas line trimmers. Protects operator and controls cutting diameter. Replace if cracked, broken, or damaged.

Replace a broken recoil spring when your gas trimmer, edger, or blower won't pull-start or the cord won't retract. Simple DIY repair in under 30 minutes.

Fastening nut for tillers, trimmers, blowers, and edgers. Secures components by working with bolts. Replace if stripped, corroded, or missing.

Protective cover assembly that shields the muffler on gas tillers and trimmers. Replace if cracked, broken, or missing to safely house exhaust components.

Engine won't start when you pull the cord? This recoil starter assembly includes the rope, pulley, and spring needed to restore pull-start function.

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.

Flywheel assembly for tillers and outdoor power equipment. Replaces cracked, damaged, or worn flywheels that affect engine timing and cooling fan operation.

This fuel tank support is a genuine MTD part, sold individually. A fuel tank support can be used as a replacement part for outdoor appliances including tillers, string trimmers, leaf blowers, and edgers. This genuine OEM part is made out of high quality, durable materials that are specifically designed to last and hold up to possible general wear and tear over long-term usage.The fuel tank support might be subject to various forms of damage that can reduce or negate the efficacy of its function. If this occurs, the fuel tank support should be removed and replaced by this genuine OEM replacement part in order to guarantee safe continued usage of the appliance over its typical lifespan.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuel tank support is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

This is an ignition coil/module assembly for a string trimmer. Ignition coils are generally found on yard equipment that uses a motor, like lawnmowers and trimmers. It sends electric pulses to the spark plug so that the equipment can start.A faulty ignition coil can cause an array of problems. If the machine isn't starting it may need to be replaced. Sometimes, engine problems may be caused by other parts, so be sure to confirm that it is the ignition coil causing the trouble. An ignition tester can be used to tell if it needs to be replaced. The clutch and the engine will have to be removed to access the old ignition coil, once it has been accessed it can be aligned on the magnets of the engine and put back together for the machine to work again.This is an OEM replacement part sourced directly from the manufacturer and it is sold individually. It is for use with these brands: Yard-Man, MTD, Cub Cadet, and Troy-Bilt.

This replacement part is an oil tank assembly. This is a genuine replacement part made by MTD. This part is responsible for holding the oil or fuel that is needed for many types of machines that run using this type of engine. A new oil tank assembly might be needed if the current one is damaged or broken in any way. This can be due to normal wear and tear after years of use. If the tank is cracked it may be leaking oil. If this is the case it is recommended that it be replaced as soon as possible. The repair should be fairly simple and only require common household tools. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a replacement cutting chain designed for the pole saw attachment on a string trimmer. It wraps around the guide bar and performs the actual cutting of branches and limbs. Replace the chain if it has become dull, stretched, or has damaged or missing teeth, resulting in poor cutting performance or difficulty making clean cuts.

This genuine replacement part is a MTD 8” bar for use with chainsaws.This chain bar is for use with chainsaw attachments. It is used to provide a seat for the chain. It is responsible for guiding the movement of the chain, the chainsaw's cutting element. A properly functioning chain bar is essential for the safe and reliable use of a chainsaw. The chain bar may become worn out or damaged due to extended use, and will require replacement. Wear on the guide bar is usually most severe on the underside of the bar. Remember to check the bar periodically to spot any wear or damage. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench or allen key may be needed for installation of this part. Please note: For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with Troy-Bilt and Cub Cadet chainsaws.

Carburetor assembly for gas leaf blowers. Mounts between engine and fuel system to regulate air-fuel mixture. Replace if cracked, leaking, or worn.