Trimmer

Fix engine running rough or hard starting issues with this carburetor adapter. Connects the carburetor to the engine cylinder. Simple DIY repair.

Air filter foam catches dirt and debris before entering your edger's engine. Replace when foam becomes clogged or damaged. Check your model for fit.

The ignition module, also called an armature magneto or a magneto charger, is an integral part of handheld gasoline lawn and landscape tools like grass trimmers, leaf blowers, power vacuums, hedge trimmers, and edgers. The ignition module provides a high voltage jolt to the spark plug of a handheld tool when a pull cord is yanked. This in turn fires the fuel/air mixture in the carburetor, bringing the engine to life. Typically, the ignition module is durable and can last as long as the effective life of the tool. Sometimes, however, heavy usage can result in the magneto not being able to deliver the necessary voltage to the spark plug. When repeated pulling of the starter rope yields no sign of combustion, often the culprit is a faulty ignition module. Because this part is used on so many different types of equipment, it is impossible to give simple replacement instructions. It should be noted, however, that the part is easily located since one end of the ignition modules is the spark plug cap. Be sure to replace this part with one like this, which is a genuine OEM replacement part, manufactured to replicate the original part exactly. This ignition module is compatible with device sold by Husqvarna, Jonsered, Weed Eater, Paramount, and Poulan.

Fix engine speed issues or poor performance with this line trimmer flywheel. Regulates motor speed and stores energy. Direct replacement part.

Secures the muffler in place and reduces vibration on leaf blowers and trimmers. Replace if spring is stretched, broken, or missing for proper exhaust.

This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

Can't start your leaf blower or trimmer? A broken starter handle prevents the pull cord from engaging the engine. This replacement handle restores easy starting in minutes.

Insulation for carburetor adapter on gas line trimmers. Replaces worn, cracked, or damaged insulation between carburetor and adapter on small engines.

Shield bracket secures the debris deflector to your trimmer shaft. Replace if cracked, broken, or missing to properly mount the shield and protect you.

Replacement air box cover for gas and grass line trimmers. Snaps over air box housing to protect filter from dirt, debris, and moisture. Needed when original is cracked, broken, or missing.

Replacement assist handle for line trimmers. Mounts to the shaft to provide steering control and grip during operation. Replace if cracked or broken.

Primer bulb pushes fuel into the carburetor for easier cold starts. Replace if cracked, stiff, or not pumping fuel. Verify fit with your model number.

Secures the muffler to the cylinder on gas trimmers, blowers, and hedge trimmers. Replace if the original bolt is lost, stripped, or damaged.

Secures the air filter cover on gas leaf blowers and trimmers. Replace if knob is cracked, stripped, or missing to keep filter cover properly fastened.

This authentic OEM replacement on/off switch is a safety measure that manufacturers install to prevent the chainsaw or trimmer from starting before the operator is ready. It also allows the operator to stop their appliance at a moment's notice if they lose control of it. The on/off switch is located in or near the handle of the appliance and must be in the on position for the appliance to start. If hit to the off position, the appliance will immediately stop running. Switches can slowly wear out over time due to repeated use. When it wears out, the switch will no longer give the same amount of resistance and may be tripped more easily. This can be frustrating as it means that the operator would have to continually restart their appliance. To replace the switch, use a screwdriver to access the handle interior and detach the wiring from the old switch. Install the new part and reassemble. This switch is a high-quality replacement part for Craftsman chainsaws and trimmers, and as such, it comes sourced directly from the original manufacturer. This part ships individually.

Engine won't start, stalls, or runs rough? This gas line trimmer carburetor controls the fuel-air mixture for proper engine performance. Moderate DIY.