Trimmer

Engine won't start or runs rough? This spark plug ignites the fuel-air mixture in tillers, blowers, and trimmers. Simple DIY fix in under 15 minutes.

This is a high-quality retainer that is typically used in string trimmers. It is made of durable metal and fits in the area between the outer spool assembly and the spring on the trimmer. The purpose of the retainer is to ensure the spool stays in the correct location while the string trimmer is being used. This component can become damaged, break, or be lost and will need to be replaced in order to be sure the spool is supported and secure.If there is an issue with the string trimmer retainer, it can cause excessive noise during use. It also may prevent the trimmer from starting if other components are affected. A wrench and work gloves may be required to replace the part. Gain access to the retainer and remove it using the wrench. The new replacement part can be installed in the same place. Reassemble other parts, and the trimmer will be ready to use.This retainer is designed to fit string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, MTD, and Yard-Man. It is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer.

This replacement part is a rope guide, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This rope guide allows the user to pull start the engine. The rope is connected to the transmission inside the engine that allows it to be turned off and on when desired. A new rope guide might be needed if the current one is damaged or missing. If the user is unable to start the lawn mower, then the rope guide might not be connected and should be replaced. Be sure that the engine is completely powered off while attempting this repair as this part is close to the engine inside the appliance. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer to ensure proper fit in all appliances. Reference the owner's manual for more specific guidance.

Replacement shoulder strap for line trimmers and leaf blowers. Attaches to equipment for comfortable, hands-free operation. Replace if worn, frayed, or broken.

Reel spool assembly for gas line trimmers. Holds and feeds trimmer line during operation. Replace if spool is cracked, worn, or missing components.

Seals the connection between muffler and engine on gas leaf blowers and trimmers. Replace if exhaust leaks or engine runs loud. Verify fit with model number.

Air cleaner cover assembly for gas leaf blowers and trimmers. Protects the air filter from debris. Replace if cracked, broken, or missing clips.

This is a genuine MTD air cleaner cover that is designed for use with select models of outdoor lawn and garden engines. The air cleaner cover is designed to fit over the air cleaner and keep debris from getting into the filter and the engine. Over time and even with the best care, air filters can become clogged, dirty, and even damaged, and they should be checked during regular routine maintenance. For those who want to replace a damaged cover or housing at the same time as the cleaner filter, this part is going to do the job. A screwdriver will be needed to install the part. Be sure to allow the unit to cool and wear gloves when performing repairs.This is an OEM replacement from MTD that is manufactured to specific standards. It can be used with select trimmers from Troy-Bilt, Cub Cadet, Yard Machines, and MTD. It includes the filter cover and the two bolts that hold it in place. The air cleaner element is also included in this assembly, which is sold as an individual unit.

Engine won't start or runs rough? This spark plug provides reliable ignition for small engines in trimmers, blowers, and tillers. Easy DIY replacement.

This is a fuel tank assembly that is made to be used with several models of leaf blowers from various manufacturers. It works with handheld blowers and includes a full assembly with the fuel tank, fuel cap, and fuel lines. This component is part of the fuel system and should be replaced immediately if it is damaged or cracked as it can be dangerous to use it in that state. When replacing the fuel tank assembly, make sure the leaf blower is turned off. Disconnect the spark plug wire and drain the gas from the tank before moving forward with this project. A screwdriver is needed to make the repair and work gloves will also be useful. Take out the screws that hold the fuel tank and then remove the fuel lines. The new replacement fuel tank can be installed before the fuel lines are added and the cap is placed on top.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The fuel tank assembly is sold as an individual item. It is made to be compatible with several leaf blowers manufactured by Yard-Man, Troy-Bilt, Craftsman, MTD, and Cub Cadet.

The carburetor replacement part here can work with several types of gas-powered machines for use in lawn care and gardening. The carburetor is one of the most important parts of an engine. It is where the air and fuel are mixed before the fuel goes into the engine. The correct ratio helps to ensure that the engine starts easily and functions properly. If the engine is difficult to start, if there are gas leaks, or the engine has trouble continuing to run after being started, the carburetor could be at fault. Over time, parts of the carburetor could fail. When there are issues with the carb, it should be replaced as soon as possible. This genuine OEM replacement carburetor is sold individually. It can replace the carburetors in certain models of edgers, trimmers, and tillers. Compatible brands include MTD, Bolens, Yard-Man, Yard Machines, Ryobi, Cub Cadet, Troy-Bilt, and Craftsman. Owners must ensure they are choosing the correct carb for their make and model.

This flywheel assembly mounts on the engine crankshaft and provides the magnetic field needed for ignition timing. It also stores rotational energy to keep the engine running smoothly between power strokes. Replace this part if the engine has no spark, misfires, or if the flywheel has a cracked or damaged magnet.

The cam is a part used in trimmers to counterbalance the blades. This is a small, 1 x 1 inch, circular part with a small cutout in it. When a trimmer is used on a regular basis, it will cause wear and tear to the cams. Over time, these parts can fail and will need to be replaced to ensure the trimmer is working and cutting properly. This is an OEM part sourced directly from the manufacturer. It is sold individually.The cams in a trimmer are mounted on one side of a drive member with the axis of the two cams lying on the opposite sides of the axis of the drive member. The axis of one cam should be spaced further away from the axis of the other cam. This cam engages a cutting blade of lower mass and then the other blade in order to counterbalance the inertial forces created by the reciprocating cutting blades.There are several manufacturers of this part. These include Craftsman, ClickLink, Trimmer Plus, MTD, and Cub Cadet. This replacement part is compatible with hedge trimmers and string trimmers. Remember to always wear protective gear, such as work gloves and eye protection, when operating this type of machinery.

This blade guard is a genuine MTD part, sold individually. This blade guard can be used as a replacement part for a string trimmer. This blade guard protects the blades of the string trimmer so that they are not damaged upon impact with the surface on which the string trimmer is being operated.The blade guard might have to be replaced at some point within the standard lifespan of the appliance in the event that the component suffers damage. This could occur if the blade guard is chipped, torn, punctured, or sufficiently eroded to the point that the blades are directly exposed to potential impact with hard surfaces. The blade guard needs to be removed and replaced with this genuine OEM replacement part if the blades are exposed or are at risk of exposure over general long-term usage.This is an OEM part sourced directly from the manufacturer. It is sold individually. This blade guard is compatible with the following brands: MTD, Craftsman, and Cub Cadet.

The momentary switch is a part that is unique to self-propelled lawn mowers and used to control the power of the self-propelled movement. The momentary switch provides power when pressed and held, and will ensure that the unit operates properly while in use. Over time, the momentary switch can become worn, short out, or just stop working as it should. This will require a replacement with a compatible part or the self-propelled part of the machine will not work properly. This genuine OEM part is compatible with self-propelled mowers from Cub Cadet, Bolens, MTD, Murray, and Troy-Bilt. It is made of durable materials and sold individually. Replacing this switch requires a wrench and screwdriver, as well as a socket set. Without a self-propelled switch, the mower will still operate but it will require the user to push the machine with their entire body weight. This can make the process of mowing much more difficult and often cause further unnecessary wear to the machine, which is why a replacement is essential.

Boom assembly with flexible shaft for gas line trimmers. Connects the engine to the cutting head. Replace if cracked, bent, or worn from impact damage.