Parts for Whirlpool WFW97HEXW2: 05 - Tub And Basket Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This stator is the stationary motor component that creates the magnetic field needed for the washer's drive motor to operate. It restores motor function so the appliance can agitate and spin normally. What it does:

• Generates the magnetic field that interacts with the rotor to drive the motor.
• Enables proper agitation and spinning when the motor and rotor are functioning.
• Commonly replaced when motor runs poorly, makes unusual noises, or the washer fails to spin.
• Works as part of the motor assembly to maintain consistent motor performance.

• One stator

• Disconnect power and water supply before beginning any repair.
• Access typically requires removing the washer cabinet or motor housing; follow the service manual for your model.
• Inspect the rotor/motor and wiring for damage when replacing the stator.

This replacement screw secures appliance components such as panels, brackets, and trim. Replacing a missing or damaged fastener restores a tight, rattle-free fit and helps keep your appliance assembled correctly after service or routine maintenance.

• Fastens panels, brackets, or covers to the cabinet/frame for proper alignment and support
• Replaces a stripped, corroded, or missing screw that no longer holds securely
• Helps reduce vibration and rattling caused by loose parts
• Useful when reinstalling components after repairs or part replacements

• Disconnect power; turn off water or gas to the appliance if applicable
• Use the correct driver size; hand-start threads to avoid cross-threading
• Tighten snugly—do not overtighten into plastic or thin sheet metal
• Inspect the mating clip/threads and replace damaged hardware

This counterweight is a replacement door balance weight that helps stabilize an appliance door for smoother, more controlled opening and closing. It restores proper door balance and reduces sagging or uneven movement. What it does:

• Adds counterbalance weight to a refrigerator/freezer door assembly for correct alignment
• Helps prevent door sag, slamming, or uneven closing that can compromise the seal
• Reduces strain on hinges and ensures doors operate smoothly
• Quietly stabilizes the door during normal use

• One counterweight

• Disconnect power and empty/remove door contents before starting
• Follow the appliance service manual for door removal/installation; some steps may require two people
• Use appropriate hand tools and avoid forcing parts; retain fasteners for reuse

The Bellow is an OEM part for Whirlpool washing machines. It acts as a flexible seal between the washer's door and drum, preventing water from leaking out during wash and spin cycles. The bellow also helps to absorb vibrations, ensuring smooth and quiet operation of the washer.

Causes of a bad bellow can include wear and tear from frequent use, exposure to harsh detergents, or physical damage from sharp objects or overloading the machine. A damaged bellow can lead to water leaks and operational inefficiencies.

Symptoms of a bad bellow include:

• Water leaking from the door area during washing
• Visible cracks, tears, or wear on the bellow
• Increased noise and vibration during operation
• Difficulty in maintaining a proper seal when the door is closed

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Inner Door Boot Seal Clamp is an OEM replacement part for Whirlpool front-loading washing machines. This clamp is responsible for securely holding the inner door boot seal in place. The door boot seal helps to prevent water leaks and contain washing processes. Its proper placement is ensured by this specialized clamp.

Causes of a bad clamp can include damage from over-tightening during installation and breaking or cracking over time due to normal use.

Symptoms of a bad Inner Door Boot Seal Clamp include:

• Gaps appearing around the edges of the door where water can seep or leak
• The inner boot seal not fitting or sitting flush any longer
• Developing puddles or drips of water outside the washer
• Visible water buildup inside the door seal cavity

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Some Kenmore models.

This drum baffle mounts inside the rotating drum and lifts items so they tumble evenly through the cycle. Replace a cracked, loose, or missing baffle to reduce noise and restore consistent tumbling performance. What it does:

• Lifts and separates laundry as the drum turns for even tumbling
• Helps prevent clumping that can lead to poor results or longer cycles
• Maintains balanced drum movement; damage or looseness can cause rattling or scraping
• May help if items aren't tumbling well, you hear thumping, or garments snag inside the drum

• 1 drum baffle

• Disconnect power before servicing; for gas dryers, also shut off gas. For washers, turn off water supply.
• Open the door and rotate the drum to access the baffle's mounting screw(s).
• Remove the screw(s), disengage the baffle from its slots, and lift it out.
• Seat the new baffle in the slots and secure with the screw(s). Hand-spin the drum to confirm clearance before use.

This spring-style hose clamp secures flexible appliance hoses to fittings, preventing leaks and keeping connections tight during operation. It's a small but critical fastener for reliable fluid containment. What it does:

• Holds a rubber or plastic hose firmly to a barb or nipple to stop leaks
• Keeps drain, inlet, or recirculation hoses seated under pressure and vibration
• Helps prevent water damage and performance issues caused by loose hose connections

• Use pliers or a clamp tool to expand the spring clamp and slide it into position; release slowly to seat
• Inspect hose and fitting for damage and replace if cracked or worn before installing the clamp
• Disconnect power and water and follow appliance safety procedures before servicing

This air trap assembly replaces the factory air trap that helps control air in the refrigerator water line, restoring steady water flow to the dispenser and ice system for more reliable fills and reduced sputtering. What it does:

• Creates a controlled air pocket in the water line to prevent sputtering or intermittent flow at the dispenser and ice maker.
• Helps maintain consistent water delivery so the ice maker can fill reliably.
• Reduces the chance of air-related filling issues and noisy gurgling from the water line.
• Fits into the appliance's water plumbing as a dedicated inline assembly.

• Always unplug the appliance and shut off the water supply before beginning service.
• Inspect tubing and fittings for damage; replace any brittle or cracked lines to ensure a leak-free connection.
• Use hand tools; avoid overtightening fittings which can damage the part or tubing.
• After installation, restore water and power, run several dispense/fill cycles, and check all connections for leaks.

This small black clamp secures a hose, tube or wiring harness to prevent movement and abrasion. It's a direct-fit replacement used to keep connections stable so lines stay routed and protected during normal appliance operation. What it does

• Holds small hoses, tubing or wiring harnesses firmly in place
• Prevents chafing and accidental disconnection from vibration or movement
• Helps maintain routing to reduce stress on attached components
• Commonly used where a compact, non-corrosive clip is required

• Disconnect power before servicing any electrical appliances
• Use appropriate hand tools; avoid over-tightening which can damage hoses

The Suspension Springs are an OEM replacement part for Whirlpool washing machines. This set contains two heavy-duty coil springs designed to absorb vibrations caused by unbalanced or off-center loads inside the washer tub.

Causes of bad springs can include cracks or fractures from extended use, overloading, mineral buildup hampering flexibility, or rust accumulating over many years.

Symptoms of bad or broken suspension springs include:

• Excessive vibration and shaking even with balanced loads
• Loud banging or thumping noises during cycles
• Hissing or squeaking that worsens over time
• Gradual misalignment of the tub on support rails

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Vent Hose is an OEM part for Whirlpool washers. This flexible hose is used to vent hot, moist air from the washer to the outside of your home, ensuring efficient operation by removing humidity and preventing mold growth inside the washer.

Over time, the vent hose can become clogged with debris, develop kinks, or suffer damage such as tears or holes. 

Causes of a bad vent hose can include the accumulation of lint or debris, physical damage from moving the washer, or general wear and tear over time.

Symptoms of a bad Vent Hose include:

• Longer drying times in washer-dryer combos
• Excessive humidity or mold growth inside the washer
• The washer feeling hotter than usual during operation
• Visible damage or kinks in the hose

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This tub clamp secures a flexible seal or hose to the appliance's tub, maintaining a tight, leak-resistant connection. Replace a weakened or damaged clamp to stop leaks and keep the tub joint stable during operation.

• Applies even clamping pressure around the tub connection
• Helps prevent water leaks at the tub-to-seal or tub-to-hose joint
• Restores proper fit when the original clamp is stretched, stripped, corroded, or missing
• Common symptoms: water at the base/front, loose seal or hose, visible clamp damage

• Disconnect power and turn off water before service
• Access the tub connection; remove the old clamp and inspect the seal/hose for wear
• Clean mating surfaces; seat the seal evenly, position the clamp, and tighten until snug without pinching the rubber
• Run a quick fill/drain test and check for leaks

Push-in nut that secures panels, trim, or small components to studs or shafts. Restores a firm, vibration-resistant fastener to help stop loose panels and rattling caused by a worn or missing nut. What it does:

• Secures panels, trim or small assemblies to mounting studs or shafts.
• Helps keep parts aligned and reduces vibration or rattling during operation.
• Common symptom: loose or shifting panels, audible rattling, or components that won't stay in place.
• Designed for a push-fit installation to replace worn or missing fasteners.

• Always disconnect power to the appliance before servicing.
• Push the nut fully onto a clean, undamaged stud until seated; replace damaged studs or mounting hardware.
• If needed, use pliers or a socket to press the nut on evenly—avoid deforming surrounding plastic or sheet metal.

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Includes water temperature sensor.

The Water Temperature Sensor is an OEM part for Whirlpool washing machines. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle. Note: The sensor does not include the seal WP8540766. Order separately if needed. 

Causes of a bad temperature sensor can be failures over time due to mechanical wear, thermal stress on electronic components, or damage from leaks/flooding inside the unit.

Symptoms of a bad water temperature sensor include:

• Inability to switch between wash steps or advance through the cycle
• Erratic or inconsistent temperature readings
• Failure alarms or error codes displayed
• Improper or incomplete washing even on high heat settings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Shock Absorber Washer is an OEM replacement part specific to Whirlpool-brand washing machines. It is a hydraulic device that absorbs the vibrations of the outer washer tub. Note: This is only one shock absorber.

Symptoms of worn or cracked shock absorber washers include:

• Noisy operation as the washer shakes or moves during cycles
• Physical signs of deterioration
• Over time, increased stresses can damage connected components

Causes involve many cycles of compression and release and solvents inside the washer degrading natural rubber. Deteriorated washers no longer absorb vibrations properly.  

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This vent fan assembly replaces the exhaust blower that circulates air through the vent system, helping remove smoke, steam and odors from the cooking area. Restores proper ventilation and airflow in compatible range/microwave units. What it does:

• Spins the blower wheel to pull air through the vent and out the exhaust path
• Helps reduce cooking smoke, steam and lingering odors when operating
• Addresses symptoms like weak or no exhaust airflow and unusual fan noise
• Works with the existing housing, ducting and motor connections when compatible

• One vent fan assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle the blower wheel carefully to avoid bending fins or damaging the housing
• Verify fit and electrical connector match the appliance before final assembly

This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does

• Fastens brackets, panels, and internal sub-assemblies in the appliance
• Helps maintain alignment to reduce vibration and rattling
• Replaces missing, rusted, or stripped screws that no longer hold
• Useful when a part won't mount securely or a screw backs out during use

• One screw

• Disconnect power; for gas appliances, also shut off the gas supply
• Compare to the original for length and thread style for the location
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Do not overtighten; if the mounting hole or clip is worn, replace it

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.