Wall Oven Blower Wheel Or Fan Blade

I found the one at great price at Appliance Parts Pro. Fan came fast! TaDa fixed within days! Thanks!! Read more

• Noisy

I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the... Read more

Changed out the Fan. Oven turns all heaters on to quickly get to temperature - the sensor probe is next to the broil heater - it quickly senses the broil element heat and claims a false oven temperature and "reaches" set temperature at the sensor probe. Changing the fan causes the air to circulate during this time - so the entire oven heats up. The Fan is supposed run in Bake mode during heat up. The Fan blade nut is a left hand thread - turn CCW to tighten and Clockwise to loosen - RIGHTY... Read more

Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out. Read more

The oven was so loud, it was hard to talk to someone in the kitchen. We replaced the motor and the fan blade. 1. Turn off power to the oven. 2. Remove the oven doors 3. Remove the cover for the fan. 4. Turn the fan blade nut clockwise to loosen( it's opposite of normal) - Save the nut and the small clip that is behind the fan as you'll need them again. 5. Remove the screws that hold oven to the kitchen cabinet frame. 6. Slide oven out of kitchen cabinet and place on the floor - it takes 2... Read more

I removed oven panel and found the fan blades had warped and were hitting the base that fan was mounted to.I turned off the power via circuit breaker,removed fan mounting screws,removed two wires and installed new fan.Reset breaker,oven is nice and quiet now. Read more

At first, I thought that it was the defrost timer, but when I took apart the freezer, I found that the evaporator fan motor wasn't running, so I replaced it. Read more

I replaced the downdraft fan and fan motor of my 25 year old JennAire C301 cooktop. The issue was getting the fan/motor assembly out in such a tight place. I had to first remove the fan cover, cut the wires, then the assembly came out. Putting back wasn't as tough although getting the cover back on (over the motor) was a bit of a strain. Wired it back, turned it on, and was thrilled. Now I'll replace the knobs and burners and we're back in business. Read more

Ordered fan assembly. Not difficult to install at all. Remove the back cover, remove the fan cover inside the oven, remove the motor/fan assembly and put it all together. Easy. Read more