Wall Oven Parts

This square drip pan is used on gas ranges. Color: chrome. It measures about 8 inches wide by 8 inches deep.

This is a double drip pan is made for ranges, stoves, and cooktops. This is a genuine replacement part made by General Electric. The double drip pan is situated underneath two heated elements and is able to catch any food or debris that fall when cooking. The double drip pan is there to catch any and all waste so that the user may easily clean up after the heat is turned off and the appliance is cooled down.A new double drip pan might be needed if the current one is damaged in any way including being broken or bent so that is it not fully secure under the burner. This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with ranges, stoves, or cooktops made by General Electric.

This drip bowl catches and channels excess moisture or drips to help keep the area under the dispenser or ice/water outlet clean and dry. Durable molded plastic resists staining and is shaped for correct fit and drainage. What it does:

• Collects and directs drips from the dispenser or outlet to prevent pooling
• Helps reduce water on the cabinet floor and in the drip tray area
• Restores proper alignment and containment when the original bowl is cracked or warped
• Compatible with units that use an 8" black drip bowl as the dispenser/collector component

• One 8" black drip bowl

• Remove power to the appliance before beginning any service
• Typically snaps or slides into place; check for retaining clips or mounting tabs
• Inspect surrounding seals and gaskets; replace if damaged to prevent leaks

A decorative trim ring that restores the original finish and helps secure surrounding components on your appliance. Replaces cracked, faded or loose trim to improve appearance and maintain a proper fit. What it does

• Covers and finishes the edge of a control or opening to give a clean, factory look.
• Holds adjacent trim or components in place to prevent gaps and rubbing.
• Hides wear, scratches or discoloration for an improved appearance.
• Common symptom: visible cracks, chips, or a loose/misaligned trim piece.

What's included

• One trim ring.

Install notes

• Disconnect power to the appliance before starting any work.
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the trim.
• Handle plastic trim carefully to avoid scratches; align tabs/clips before fastening.

Small trim ring for electric range surface elements that provides a finished appearance and helps hold the coil in place while reducing gaps where food and debris can collect. What it does

• Secures the small heating coil and centers it in the cooktop opening.
• Covers the cooktop cutout for a cleaner, finished look.
• Helps reduce debris buildup around the element and can limit burner wobble or rattling.
• Common symptom fix: replaces a warped, cracked, or visibly damaged trim ring that leaves a gap around the element.

• Disconnect power to the range before servicing to avoid shock or injury.
• Typically installs by lifting the coil element and seating the trim ring into the cooktop opening; the element is then set back into place.
• Inspect the cooktop and element for damage; replace damaged components before use.

Chrome

The Burner Bowl MD is an OEM part for GE ranges and cooktops. It is designed to sit beneath the burner element, catching spills and drips during cooking while also helping to direct heat upwards towards the cookware. This component helps maintain cleanliness and efficiency in the cooking area.

Causes of a bad burner bowl can include wear and tear from frequent use, staining or charring from spills, and corrosion from exposure to moisture and cleaning chemicals. Physical damage or warping from high heat can also impair its functionality.

Symptoms of a bad Burner Bowl MD include:

• Visible rust or corrosion
• Difficulty in properly fitting the burner element
• Accumulation of food debris or stains that are hard to clean
• Heat being unevenly distributed or directed away from cookware

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: black. It measures about 11-1/2 inches wide by 20 inches deep.

This drip pan sits beneath a surface burner to catch spills and boil-overs, protecting the cooktop and making cleanup easier. Replacing a stained or damaged pan helps the burner seat correctly and restores a clean appearance.

• Collects drips and splatters under the burner area
• Shields the cooktop surface from heat and residue buildup
• Provides proper seating/alignment for burner components
• Common signs it's time to replace: rust, heavy discoloration, pitting, warping, or a missing/ill-fitting pan

• Allow the appliance to cool; disconnect power or shut off gas per your model's instructions
• Remove the components above the pan (grate/ burner parts or element, as designed for your model)
• Lift out the old pan, clean the area, and position the new pan with alignment features oriented correctly
• Reinstall components and verify proper seating and operation

This is a medium burner pan that is used with ranges and stoves. The burner pan is located under the heating unit to catch any drips and spills. This prevents the drips from reaching the internal components of the stove where they could cause additional damage. Over time, the burner pan can be overly soiled and damaged and may need to be replaced. The process of replacing the medium burner pan takes only a few minutes. The first step is to unplug the stove or range. Next, the elements on the cooktop need to be lifted to access the parts underneath. The burner pan will be found in one of the cavities under the burners. These can be removed by hand and set aside. When replacing the burner pan, make sure the hole on the side is oriented to fit the terminals. Plug the elements back in and plug in the stove.The medium burner pan is made for use with ovens, ranges, and stoves manufactured by Kenmore and Frigidaire. It is sold as an individual product. This is an authentic OEM replacement part that is sourced directly from the manufacturer.

This 6" porcelain bowl is a direct-replacement interior bowl used in compatible appliances to restore a smooth, easy-clean surface and secure containment for food or liquids during operation. Durable porcelain helps maintain appliance appearance and function. What it does:

• Replaces a cracked, chipped, or stained porcelain bowl to restore a sealed, easy-to-clean surface
• Provides a stable container for holding food or liquids during normal appliance use
• Helps prevent leaks or drips from a damaged interior bowl
• Maintains the appliance's original finish and resists everyday wear

• One 6" porcelain bowl

• Disconnect power to the appliance and allow all surfaces to cool before handling
• Handle porcelain carefully to avoid chipping; wear gloves if needed
• Seat the bowl in the appliance according to the OEM alignment or mounting points

This replacement tray catches and channels water and debris to help prevent leaks and puddling under the appliance. It restores the original containment path so fluids drain where intended and keeps the appliance base cleaner. What it does:

• Collects and directs water or condensate away from sensitive components
• Helps contain minor spills and prevents pooling under the unit
• Reduces risk of water-related stains, odors, or damage to flooring
• Supports adjacent components and ensures proper fit in the appliance base

• Disconnect power and water supply before beginning any repair
• Remove surrounding panels or access covers to reach the tray per your model's service instructions
• Replace tray carefully, ensuring it seats fully and any seals or clips engage
• Check for leaks after reinstalling panels and restoring power/water