White Westinghouse Dryer Fuse Or Sensor
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204267
The High Limit Thermostat is an OEM part for Frigidaire dryers. It serves as a critical safety device, designed to cut off the power to the heating element if the dryer overheats. This thermostat helps prevent potential fire hazards by maintaining a safe operating temperature within the dryer.
Symptoms of a bad High Limit Thermostat include:
- The dryer not heating up at all, indicating that the thermostat may have tripped or failed permanently.
- Dryer repeatedly shutting off during cycles, which can be a sign that the thermostat is tripping too frequently due to overheating issues.
- Excessive heat in the dryer, suggesting that the thermostat is not functioning properly and failing to regulate the temperature.
Causes of a bad high limit thermostat can include restricted airflow due to a clogged lint filter or venting system, malfunctioning heating elements that generate excessive heat, or simply the thermostat wearing out over time.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Shuts off too soon
-
Too hot
-
Takes too long to dry
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
The dryer did not heat! Linda R. • La Jolla , CA • November 30, 2014
My appliance repair guy checked out the problem, but the stack washer dryer required the contractor to dismantle the cabinet to allow the repair to occur. So i wanted the parts available for the repair, so we would not have to have the dryer pulled apart in a small space for an extended time i ordered the parts on Friday afternoon and they arrived at my home before noon on Saturday! The contractor and the repairman were able to coordinate the repair on Tuesday morning, and though the...
Read more
More
$38.95
- Compare At:
-
$62.47
- You Save:
-
$23.52
Genuine Frigidaire part
By: Frigidaire
Part Number: 134120900
The Thermal Limiter is an OEM part for Frigidaire dryers. It acts as a safety feature, designed to prevent the dryer from overheating by shutting down the appliance when the internal temperature exceeds safe limits.
Symptoms of a failing Thermal Limiter include:
- The dryer failing to start or stopping abruptly during a cycle
- No heat being generated while the dryer is running
- The dryer overheating or feeling excessively hot
Common causes for a bad thermal limiter include restricted airflow due to a clogged lint filter or venting system, component failure from age or faulty manufacturing, and unusually high operating temperatures from overloading the dryer or mechanical failures elsewhere in the system. When a thermal limiter trips or fails, it must be replaced to restore functionality to the dryer.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Shuts off too soon
-
Too hot
-
Takes too long to dry
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Frigidaire part
By: Frigidaire
Part Number: 137032600
The Inlet Thermal Fuse is an OEM part for Frigidaire laundry centers. It serves as a safety device to prevent the washer from overheating by cutting off electrical power if the temperature exceeds safe levels.
Causes of a bad inlet thermal fuse can include electrical issues such as short circuits, prolonged exposure to high temperatures, or wear and tear from regular use.
Symptoms of a bad inlet thermal fuse include:
- The washer not starting or stopping mid-cycle
- No power to the washer, even when plugged in
- Error codes indicating thermal issues
- The washer overheating during operation
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Electrolux dryer e64 error code Katherine S. • Apex , NC • January 05, 2015
I think I have a lemon of a dryer. I keep having to pay someone to replace my heating element about every year. So I already had the heating element, but I thought I would replace the thermostat and the limiter also. Yes, I am a 46 year old mom, and I replaced all three items. Thank goodness to youtube! Ha! I have ordered from you before and you always send promptly. Thanks!
Read more
More
$14.95
- Compare At:
-
$22.59
- You Save:
-
$7.64
Genuine Frigidaire part
By: Frigidaire
Part Number: 134587700
The Control Thermistor is an OEM part for Frigidaire dryers. This component plays a critical role in regulating the temperature inside the dryer by monitoring the internal conditions and sending temperature data to the control board. The control board then uses this information to adjust the heat cycle, ensuring clothes dry evenly and safely.
Symptoms of a failing control thermistor include:
- Clothes not drying properly or cycles running too hot or too cold
- Frequent stopping or starting of the dryer
- Error messages related to temperature or sensor issues displayed on the control panel
Causes of control thermistor failure generally involve faulty wiring, accumulation of lint and debris affecting the sensor's accuracy, or wear and tear from regular use that leads to degradation of the sensor components.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Constant beeping dryer kept restarting Jimmy L. • Del City , OK • February 15, 2015
Replaced control board. Did not need Control Thermistor in my case, but I'm keeping it as backup. Got the Drum Belt just in case it breaks on me since the dryer is aging.
To replace control board:
Disconnect power and pull dryer away from wall.
Take 2 black screws on the back off to remove the top lid.
Remove 2 screws on top that hold the control interface on.
Remove 2 screws on the bottom backside of the control.
Pull out control panel and pull off terminal connections and push to remove...
Read more
More
$54.26
- Compare At:
-
$65.11
- You Save:
-
$10.85
Genuine Frigidaire part
By: Frigidaire
Part Number: 134711401
The Outlet Thermal Fuse is an OEM part for Frigidaire dryers. It acts as a safety device that protects the dryer from overheating by cutting off the power if the temperature exceeds a safe level. This ensures the dryer operates safely and helps prevent potential fire hazards.
Causes of a bad thermal fuse can include lint buildup blocking airflow, overloading the dryer, or mechanical failures in the heating element. These issues can cause the dryer to overheat, leading to the fuse blowing as a protective measure.
Symptoms of a bad outlet thermal fuse include:
- The dryer not starting
- The dryer running but not heating
- Sudden stopping during a cycle
- No power to the dryer
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
E63 error code and dryer overheating William S. • Ladson , SC • May 03, 2014
Replaced exhaust thermal cutoff switch. Sears wanted to charge for a service visit + parts and labor. $17 part, $6 shipping and I received the part the following day. Repair complete in less than an hour at a fraction of the cost. Thanks appliance pros.
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281135
The Dryer Heat Sensor is an OEM part for Frigidaire dryers. This sensor monitors the temperature inside the dryer drum to ensure clothes are dried effectively and safely by regulating the heat levels during the drying cycle.
Causes of a bad heat sensor can include wear and tear from frequent use, buildup of lint or debris, or electrical issues. A malfunctioning sensor can result in incorrect temperature readings, leading to under-drying or overheating of clothes.
Symptoms of a bad Dryer Heat Sensor include:
- Clothes not drying properly or taking too long to dry
- Dryer overheating or shutting off unexpectedly
- Inconsistent drying cycles
- Error codes related to temperature control
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
$38.95
- Compare At:
-
$55.90
- You Save:
-
$16.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 137539200
The Limiter is an OEM replacement part for Frigidaire dryers. Also called a high-limit thermostat, it prevents the dryer from overheating in the event of an obstruction or blockage. The limiter monitors air temperature and airflow inside the dryer drum.
Symptoms of a bad limiter include:
- The dryer not heating up at all or heating intermittently
- Error codes or failure codes displayed
- Smelly exhaust from the dryer vent
- Slow or inefficient drying times
- Dryer will not start at all
Causes of a bad limiter can be normal wear and tear over time, failure of internal components, or exposure to overheating conditions from blockages or items not suitable for machine drying.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
E66 error code. Door open came on and dryer would not turn on at all other than display of error. Bruce H. • South Elgin , IL • March 15, 2014
I actually found a post from another brave soul who was willing to try to fix his, and had stated when he put the new limiter switch in, it fixed the problem.
Since the whole back of the dryer needs to come off to get to the burner, and the limiter switch is inexpensive it seemed like common sense to take this approach first. After all, you don't put a new engine in your car if all it needs is a new battery!
I also found posts that an overheating event could fry the main control board, and...
Read more
More
$25.95
- Compare At:
-
$30.88
- You Save:
-
$4.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 137116700
The Thermostat is an OEM replacement part for Frigidaire dryers. It plays a crucial role in monitoring and regulating the temperature inside the tumbler. The thermostat works closely with the heating element and controls to accurately sense temperature fluctuations and modulate heating levels accordingly.
Symptoms of a bad thermostat include:
- Clothes taking an overly long time to dry
- The dryer is heating excessively and tripping the breaker
- Temperature display or heater lights not functioning
- Clothes drying unevenly, still damp in spots
Causes can be normal wear over extreme heating and cooling cycles. Environmental contaminants may also impact sensor performance.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer error e66 then door open Nolan R. • Hoboken , NJ • February 06, 2017
My Electrolux Frigidaire Gas Dryer stopped working and I got an error code E66 that the thermal limiter blew from over heating. The E66 code stops displaying after the initial code and you will then get a door open message. I replaced the thermal limiter and the thermostat just to be sure which part at the problem. The job is hard because you have to take apart the entire dryer and remove the drum. Would be a tough project to complete on your own.
Read more
More
$46.95
- Compare At:
-
$55.87
- You Save:
-
$8.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 131298300
This dryer thermostat monitors internal air temperature and opens/closes the heater circuit to keep drying safe and consistent. Replacing a weak or failed thermostat restores proper heat and helps prevent overheating or nuisance shutdowns. What it does:
- Senses exhaust/heater housing temperature and switches the heating circuit based on temperature
- Helps maintain target drying temperatures for consistent performance
- Provides over-temperature protection by opening the circuit if heat rises too high
- Common symptoms include no heat or weak heat, long dry times, heat cutting out mid-cycle, or the dryer running hotter than normal
What's included:
Install notes:
- Disconnect power before servicing; heating components can be live and hot
- Access location varies by model; typically mounted on the heater or blower housing behind a rear or front panel
- Transfer wires from the old thermostat to the new one one-at-a-time and secure firmly; ensure the mounting surface is clean and flat
- After replacement, check and clear the venting/duct for proper airflow to prevent repeat failures
Do-It-Yourself Stories from Customers like You
Rubbing blocks and felt that seal the front of the drum are worn drum is sagging and staining clothes with smears of rust Seth W. • Upper Arlington , OH • January 23, 2016
Replaced upper and lower felts. Painted rubbing surface on inside of drum with refrigerator enamel. Took out drum and lubed rear bearing. Replaced 2 of the 3 thermostats, and the belt just on principle.
Spent a lot of time with shop-vac removing lint from drier and exhaust ducts.
Runs great and is no longer cooking or staining clothes.
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Frigidaire part
By: Frigidaire
Part Number: 134786110
This moisture sensor monitors dampness inside the dryer drum and signals the control when fabrics are dry, helping automatic cycles end on time and avoid overdrying. Replacing a failed sensor can restore consistent Auto Dry performance and cycle times. What it does:
- Detects moisture level via conductivity across the sensor surfaces inside the drum
- Sends feedback to the control so Auto Dry cycles advance and stop correctly
- Helps prevent overdrying and underdrying in sensor-based cycles
- Common symptoms of a faulty sensor may include: auto cycles ending too soon or running too long, clothes remaining damp, or the dryer staying on "Sensing" while timed cycles still work
What's included:
Install notes:
- Disconnect power and, if applicable, shut off gas before servicing
- Access the sensor at the front bulkhead/lint housing area; remove front panel as needed per model
- Transfer connectors and route wiring exactly as original; secure the sensor firmly
- Clean the sensor contact surfaces with rubbing alcohol; residue from dryer sheets or fabric softeners can affect readings
Do-It-Yourself Stories from Customers like You
Clothes got stuck on moisture sensor bar and broke it off Felix M. • Kyle , TX • April 17, 2015
Fixed it in 5minutes.
One end has a Phillips head screw and the other has a tab with to metal leads for wires. The end with the tab broke. I removed the screw for the other end abd the sensor bar came off. To put the new piece on, I connected the wires to the leads, slid the tab end into place on the drum and screwed in the other end. Done! Easy!
Read more
More
$71.95
- Compare At:
-
$84.90
- You Save:
-
$12.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 134048900
This control thermostat regulates the dryer's operating temperature. It senses exhaust air heat and cycles the heater on and off to maintain consistent drying performance and help protect the appliance from overheating. What it does:
- Monitors exhaust temperature and controls the heating element to hold the selected heat level
- Helps prevent overheating by cycling heat off when the target temperature is reached
- Supports even drying and consistent cycle times
- Typical failure symptoms: no heat or not enough heat, long dry times, runs too hot, inconsistent temperatures
What's included:
Install notes:
- Disconnect power before servicing; if gas, also shut off the gas supply
- Access location varies by model; typically mounted on the heater housing or exhaust duct
- Transfer wire leads one at a time to the new thermostat and secure with the original screws
- After reassembly, clean the lint path and ensure good airflow to prevent repeat failures
Do-It-Yourself Stories from Customers like You
Timer did not advance, no heat Edward P. • Passaic , NJ • January 21, 2019
Replaced thermastate
Read more
More
$100.79
- Compare At:
-
$118.93
- You Save:
-
$18.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308015399
This safety thermostat is a temperature-limiting switch that helps protect your refrigerator/freezer by opening the circuit if temperatures reach an unsafe level, preventing damage to components and reducing fire risk. What it does:
- Monitors internal temperature and interrupts power when the preset limit is exceeded
- Prevents overheating of heating elements or compressors in defrost and refrigeration circuits
- Helps stop continuous run or cycling caused by thermal faults
- May be used as part of the fridge/freezer safety/limit control system
What's included: One safety thermostat (single unit) Install notes:
- Disconnect power to the appliance before inspecting or replacing the thermostat
- Handle carefully and avoid kinking or crushing any sensing element or capillary tube
- Verify function and wiring location against your model's service manual or wiring diagram
More
$153.95
- Compare At:
-
$183.20
- You Save:
-
$29.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 131845800