White Westinghouse Heating Element
Genuine Frigidaire part
By: Frigidaire
Part Number: 131553900
The Heating Element Assembly is an OEM replacement part for Frigidaire dryers that is responsible for generating the heat necessary for drying clothes. This assembly converts electrical energy into heat and creates the warm air that circulates within the drum to dry clothes efficiently.
Symptoms of a bad Dryer Heating Element Assembly include:
Clothes remain damp after a full drying cycle.
The dryer takes longer than usual to dry clothes.
No heat is produced, resulting in cold air circulating within the drum.
Causes of failure can include overuse, a surge in electrical power, or lint buildup causing overheating and damage to the components.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Includes rear housing with the element and insulators already attached. For the element only order 5300622034. For the insulators order 131472100.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Constant beeping no heat Amy N. • Pike Road , AL • March 27, 2018
My 12 year old Frigidaire stack on top dryer had been beeping distress messages in some unintelligible code for about a year when it completely stopped producing heat. It also had a long standing issue with delicate fabrics and thin straps or drawstrings getting caught in the drum. After using this site to troubleshoot and viewing the useful how-to videos, I ordered and replaced the heating element, thermal limiter, and felt seals. Based on others' stories, I decided to also replace the rear...
Read more
More
$117.95
- Compare At:
-
$140.36
- You Save:
-
$22.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 316442301
The Coil Surface Element is an OEM part for Frigidaire ranges and cooktops. It is a key component for cooking, providing the heat source directly under pots and pans. This 8 inch element is designed to heat quickly and maintain consistent temperature, which is essential for effective cooking and energy efficiency.
Symptoms of a bad Coil Surface Element include:
- The element not heating up when turned on
- Uneven heating or hot spots that can cause inconsistent cooking results
- The element not turning off or fluctuating in temperature
Causes of a bad coil surface element can include a breakdown of the coil itself due to general wear and tear, electrical connections becoming loose or corroded, or damage from spills or impacts during cooking.
This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My frigidaire surface element was burnt out Dong N. • Monterey , CA • November 09, 2014
I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM!
Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service.
The part fits...
Read more
More
$39.18
- Compare At:
-
$43.10
- You Save:
-
$3.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006
The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly.
Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.
Symptoms of a bad Heating Element include:
- The oven does not heat up
- Uneven cooking or baking
- Longer cooking times than usual
- The element not glowing when the oven is turned on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it...
Read more
More
$146.95
- Compare At:
-
$176.34
- You Save:
-
$29.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 316442300
The Range Surface Element is an OEM replacement part for Frigidaire electric ranges. It is a crucial component that generates heat for cooking on the stovetop surface.
Symptoms of a bad range surface element include:
- Uneven or insufficient heating of cookware
- Element failing to heat up or taking an excessive amount of time to reach the desired temperature
- Visible signs of damage, such as cracks or warping on the element's surface
- Unusual smells or noises coming from the element during use
Causes of a bad surface element can range from electrical malfunctions to physical damage caused by impact or exposure to excessive heat over time.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
My stove is really old one of my elements started splitting & my drip pans were rusty Juli R. • Dickinson , TX • September 19, 2014
My old White Westinghouse stove has easy replacement of the elements & drip pans. They literally pop in & out with no effort or education necessary.
Read more
More
$46.74
- Compare At:
-
$55.15
- You Save:
-
$8.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 318178110
The Surface Element is an OEM part for Frigidaire ranges. The small surface element is responsible for providing direct heat to the cookware placed on the corresponding burner of the electric cooktop or range. This element is typically located underneath the glass surface of the cooktop or range, ensuring efficient and even heat distribution for cooking.
Symptoms of a failing Surface Element include:
- The element not heating up at all
- Heating unevenly or only partially
- Noticeable damage or blistering on the element itself
- The control switch not regulating the temperature properly
Causes of a bad surface element can include a burnt-out coil, a break in the element's continuity, or problems with the connection points such as corrosion or loosening. Regular wear and tear from cooking can also lead to degradation over time.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven surface element went bad Shahlokh K. • Van Nuys , CA • September 21, 2014
Very easy. go online learn how to change the element step by step. order the part and you are all set. I saved $99 of labor cost.
Read more
More
$91.72
- Compare At:
-
$108.23
- You Save:
-
$16.51
Genuine Frigidaire part
By: Frigidaire
Part Number: 318372210
The Coil Surface Element is an OEM part for Frigidaire ranges and cooktops. It is a vital component that provides the heat necessary for cooking. This element is designed to heat up quickly and maintain a consistent temperature, offering precise control to accommodate various cooking needs, from simmering sauces to boiling water. This element measures 8 inches.
Symptoms of a bad Coil Surface Element include:
- Element not heating up at all or only heating partially
- Inconsistent temperatures, making cooking unpredictable
- Visible damage or warping to the element
- Electrical sparking when turned on
Causes of a bad Coil Surface Element can include prolonged use leading to element burnout, a faulty connection between the element and the stove’s electrical source, or physical damage that disrupts the coil’s continuity.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My stove is really old one of my elements started splitting & my drip pans were rusty Juli R. • Dickinson , TX • September 19, 2014
My old White Westinghouse stove has easy replacement of the elements & drip pans. They literally pop in & out with no effort or education necessary.
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
The Broil Element is an OEM part for Frigidaire ovens and ranges. It is specifically designed to provide the high heat necessary for broiling food, such as meats and vegetables. Located at the top of the oven interior, the broil element radiates heat downwards, creating a high-temperature environment ideal for browning and caramelizing the exterior of dishes while locking in juices.
Over time, the broil element can burn out or become damaged due to high temperatures and frequent use.
Symptoms of a bad Broil Element include:
- Lack of heat when broiling
- Uneven cooking or browning of food
- Visible damage or breaks in the element
- No visible glow from the element during operation
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$128.95
- Compare At:
-
$152.16
- You Save:
-
$23.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 316135401
The Surface Element is an OEM part for Frigidaire electric ranges. It is the heating element located on the cooktop, responsible for providing the heat necessary for cooking. This component is essential for the proper functioning of your stove, ensuring consistent and reliable heating for various cooking tasks.
Causes of a bad surface element can include wear and tear from regular use, damage due to spills or overheating, or electrical failures such as a short circuit. A faulty surface element can result in uneven cooking or complete failure to heat.
Symptoms of a bad surface element include:
- Element not heating up
- Uneven heating or hot spots on the element
- Visible damage such as burns or cracks
- Element cycling on and off erratically
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The right front burner was burn out Eduardo M. • Pembroke Pines , FL • March 16, 2014
Order the part to ApliancePartsPro and within 3 days I had it delivered to my front door. Looked up in their help page and was guided how to do it. It was so ease . I will recomend all my friend to get their parts at ApliancePartsPro. I am very please with the service and quality.
Read more
More
$97.95
- Compare At:
-
$127.18
- You Save:
-
$29.23
Genuine Frigidaire part
By: Frigidaire
Part Number: 154665201
The Heating Element is an OEM part for Frigidaire dishwashers. This element is responsible for heating the water during the wash cycle and ensuring the dishes are properly cleaned and sanitized. Additionally, it helps to dry the dishes by heating the air inside the dishwasher during the drying cycle.
Causes of a bad heating element can include regular wear and tear, mineral buildup from hard water, electrical failures, or damage from improper loading of dishes. A faulty heating element can lead to inadequate water temperature and poor drying performance.
Symptoms of a bad heating element include:
- Dishes not drying properly
- Water not heating up during the wash cycle
- The dishwasher not completing cycles
- Error codes related to heating issues
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Not drying dishes properly
See more...
Do-It-Yourself Stories from Customers like You
Heating element was bad Eric H. • York , PA • September 16, 2014
Turned off power to dishwasher. Removed front bottom cover of dishwasher and removed the wires going to each end of the heating element. unscrewed the two nuts holding the faulty heating element in place. Then removed bottmo dish rack and spinning washer arm from inside the dishwasher. Removed old heating element and replaced with new one. Installed in reverse order (tightened two nuts, connected wires, etc.). Turned power on as last step and was off and running...or should I say washing.
Read more
More
$58.21
- Compare At:
-
$69.27
- You Save:
-
$11.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 318198834
The Surface Element is an OEM replacement part for Frigidaire electric ranges, designed to provide efficient and even heating for cooking on the stovetop. This component is a radiant surface element commonly seen on glass and ceramic cooktops. 8 inch, 2200 watt
Causes of a faulty Surface Element can be due to overuse causing burnout, physical damage like cracks from heavy cookware, electrical issues such as faulty wiring, and corrosion disrupting heating.
Symptoms of a bad Surface Element include:
- Not heating up, indicating it may be burnt out or disconnected.
- Heating irregularly or only partially, suggesting there might be damage to the element.
- Taking longer than usual to heat up, which could point to electrical issues or reduced efficiency due to wear and tear.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Element was burned out Clayton M. • Demopolis , AL • December 16, 2018
Changed element
Read more
More
$130.40
- Compare At:
-
$156.48
- You Save:
-
$26.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303051140
This broil element mounts at the top of the oven cavity and delivers radiant heat for broiling and top-browning. Replace a broken or burned-out element to restore consistent broil performance.
- Emits high, radiant heat from the top of the oven during the broil cycle
- Used to sear and top-brown foods
- Replaces the original broil element on compatible units
- Common symptoms: No heat in broil, element won't glow, uneven top browning, visible cracks/blistering on the element
What's included: 1 broil element Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Remove oven racks; support the element while removing mounting screws
- Carefully pull the element forward and disconnect the wire terminals; avoid bending the element
- Attach the new element, secure with screws, ensure it is clear of the oven liner, then restore power and test
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Replced oven elements Bruce C. • Carrier Mills , IL • January 18, 2016
Quick shipping, easy repair.
Read more
More
$134.62
- Compare At:
-
$158.85
- You Save:
-
$24.23
Genuine Frigidaire part
By: Frigidaire
Part Number: 389082702
This dual surface element restores steady, selectable heat to a cooking zone on your electric range or cooktop. It provides two heating areas in one burner position so you can match heat output to small or larger cookware.
- Heats cookware by energizing the inner ring alone or both inner and outer rings together
- Helps resolve issues such as a surface burner not heating, only one ring heating, or intermittent/uneven heat
- Replaces a cracked, blistered, or visibly damaged element to restore reliable performance
What's included: 1 dual surface heating element Install notes:
- Disconnect power at the breaker and allow the cooktop to cool completely before servicing
- Access the element from beneath the cooktop; photograph wire locations for reference
- Carefully transfer any brackets, clips, or attached limiter from the original element if required
- Avoid touching the element surface; secure all connections and test both inner and dual settings after reassembly
Do-It-Yourself Stories from Customers like You
Two stage unit center stage was not working James J. • Elyria , OH • January 09, 2017
Ordered the closest part you had. Replaced the whole unit and it is working fine.
Read more
More
$168.72
- Compare At:
-
$199.09
- You Save:
-
$30.37
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308011964
This is the large surface heating unit for an electric range or cooktop. Replacing a failing unit restores consistent stovetop heat so cookware warms predictably and meals cook evenly.
- Provides the heat source for the large burner position on an electric cooktop
- Converts electrical energy into controlled cooking heat
- Replace if the burner won't heat, heats intermittently or unevenly, or shows visible breaks, blistering, or burn spots
- Loose, pitted, or discolored terminals can also indicate the unit is failing
What's included: One large surface unit. Install notes:
- Disconnect power to the appliance before servicing and allow all components to cool completely
- If your model uses plug-in coils: lift slightly and pull the old unit straight out of the receptacle; align and push the new unit straight in until fully seated
- Inspect the burner receptacle for heat damage before reassembly
- Restore power and test operation on low and high settings
Do-It-Yourself Stories from Customers like You
Our original surface unit large broke and we wanted to replace it. William M. • West Hartford , CT • May 21, 2020
Originally, we had mistakenly provided the wrong model number for our Frigidaire cooktop so the wrong part was sent to us. It didn't fit properly so we investigated the problem with one of the customer service reps at Appliance Parts Pro and finally resolved the situation. The proper part was purchased, it was sent to us and we were happy to discover that it fit perfectly, as did the drip pans we ordered. Problem solved! Thanks to Garrett C.
Read more
More
$138.22
- Compare At:
-
$164.48
- You Save:
-
$26.26
Genuine Frigidaire part
By: Frigidaire
Part Number: 318198817
6 inch, 1200 watt single radiant surface element.
Do-It-Yourself Stories from Customers like You
Burnt element 6". Roger O. • Pearl City , HI • January 22, 2019
Replaced with a new element from AppliancePartsPros.com. Ordered online.
Read more
More
$128.95
- Compare At:
-
$172.96
- You Save:
-
$44.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 903118-9010
Size: 8 inch. 2200 watt. Radiant.
Do-It-Yourself Stories from Customers like You
Burner on glass top stove went out Rhonda F. • Huntingotn , WV • December 02, 2014
After watching the videos and reading the instructions on your website and the instructions which came with the new part, installation was easy. There was some simple rewiring involved with the included parts, but was simple. The replacement part actually arrived the day after it was ordered and I only paid for the standard shipping. Very fast.
Read more
More
$154.66
- Compare At:
-
$184.05
- You Save:
-
$29.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 318198819
This bake element is the oven's primary heating element for baking and roasting, restoring proper oven heat so food cooks evenly. It replaces a damaged or worn element to bring back reliable bake performance. What it does
- Heats the oven cavity during bake cycles to provide consistent cooking temperatures.
- Commonly linked to symptoms like an oven that won't heat, takes too long to preheat, or produces unevenly cooked food.
- Visible damage (breaks, blisters, or heavy corrosion) or open electrical continuity are signs this element needs replacement.
- Works with the oven's control and safety systems to cycle heat as required.
What's included
Install notes
- Disconnect power at the breaker or unplug the appliance before starting any work.
- Allow the oven to cool completely and handle the element carefully to avoid sharp edges.
- Inspect wiring and terminal connections; replace any damaged connectors before reassembly.
- After installation, restore power and run a short bake cycle to ensure proper operation.
More
$162.55
- Compare At:
-
$191.81
- You Save:
-
$29.26
White Westinghouse heating element replacement parts are essential for maintaining your appliance's optimal performance. Whether you own a dryer or an oven, the heating element plays a crucial role in ensuring your appliance functions efficiently. These parts generate the necessary heat, making sure your clothes come out dry and your meals are cooked to perfection.
The White Westinghouse heating element is designed with precision to fit specific models, ensuring compatibility and enhancing efficiency. When you opt for OEM White Westinghouse parts, you're guaranteed a durable component that meets the high demands of everyday use. This investment in quality ensures the longevity and optimal performance expected from the original part.
Trust that White Westinghouse heating elements are readily available and meet high standards of durability and quality, helping keep your appliance functioning at its best with minimal hassle.
More