White Westinghouse Range Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 3203459
The Oven Safety Valve is an OEM replacement part for Frigidaire gas ranges. This valve controls gas flow to the oven burner.
Causes of a faulty oven safety valve can include wear of sealing surfaces due to prolonged heating and cooling during cooking cycles. Exposure to food or liquid residues over time may also affect valve function.
Symptoms of a bad oven safety valve include:
- The oven not heating up despite the igniter working correctly
- A smell of gas indicates a leak or uncontrolled release
- Inconsistent oven temperatures or heating patterns
- The oven failed to maintain the set temperature
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gas would not flow; oven would not start Stan G. • Hancock , NY • March 09, 2017
My tenant thought that the oven safety valve was bad, but after some research, I found that the transfer of heat from the igniter had to be sufficient enough to cause the valve to open.Your agent confirmed this and reassured me that even if the igniter was glowing, there was a 99% chance that it wasn't getting hot enough. I ordered the igniter, and also the safety valve just in case, as we were going to be fixing this on Christmas eve, so the oven could be used for Christmas dinner. Your agent...
Read more
More
$183.39
- Compare At:
-
$260.29
- You Save:
-
$76.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 316404901
This valve controls gas flow to a range/cooktop surface burner for smooth ignition and precise flame adjustment. Replacing a worn valve helps restore reliable burner lighting, accurate heat control, and safer shutoff.
- Regulates gas to a surface burner for ignition and flame size control
- Sticking or worn internal seals can cause hard-to-turn operation or gas odor
- Failure may prevent the burner from lighting or shutting off completely
- Inconsistent or unresponsive flame adjustment can indicate a failing valve
What's included: 1 valve Install notes:
- Disconnect power and shut off the gas supply before servicing
- Allow the appliance to cool; access the valve/manifold per your model's instructions
- Mark and disconnect tubing and any wires; transfer fittings or a separate spark switch from the old valve if applicable
- After installation, restore gas and check all joints with an approved leak-detection solution; verify proper burner operation
Do-It-Yourself Stories from Customers like You
Leak detected in my original valve John T. • Warren Center , PA • December 24, 2016
Replaced the old valve with a new one from AppliancePartsPros.com. I watched one of the YouTube videos to get an idea of what the process would entail. I gathered the tools I would require, plus a work light. The repair/replacement went pretty good. One thing the video I watched didn't cover was adjusting the valve for a propane system. I compared my old valve to the new one and saw that I would have to screw down the oven gas outlet until it "bottomed out".
Read more
More
$213.70
- Compare At:
-
$254.30
- You Save:
-
$40.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303208499
Made by Frigidaire. This is a dual oven valve for bake and broil.
This part fixes the following symptoms
-
Little to no heat when baking
-
Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You
Fuel saftey valve Steven M. • Perkinsville , VT • October 03, 2014
From the Appliance Parts website I watched a 3 minute Youtube video. The video actually explained the process on another range but it was enough information for me to do the project myself. The part came 2nd day UPS and I installed it in under an hour. The only hitch was that I didn't see the note (maybe it wasn't there) that explained how the valve is set for Natural gas and that for LP gas I'd need to adjust the jet that goes into the burner tube. Maybe that was on the video.
Read more
More
$388.95
- Compare At:
-
$462.85
- You Save:
-
$73.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 316404900
This surface burner gas valve regulates the flow of gas to the burner on your range or cooktop, enabling proper ignition and flame control. Replacing a worn valve restores safe operation and consistent flame performance.
- Meters gas to the burner in response to the control knob
- Supports reliable ignition and maintains a stable, adjustable flame
- Typical symptoms: burner won't light, flame won't adjust or goes out, knob stiff or difficult to turn
- Can help correct uneven heat on the affected burner
What's included: 1 gas valve Install notes:
- Disconnect power and shut off the gas supply before servicing
- Allow the appliance to cool; remove panels as directed by your model's service information
- Note valve orientation; transfer any model-specific brackets or fittings from the old valve if required
- After reassembly, check all connections for leaks with a soap-and-water solution
Do-It-Yourself Stories from Customers like You
Oven wouldn't light Michael L. • Valparaiso , IN • September 24, 2016
Found the problem through troubleshooting. Looked up the part on appliance parts pro. It was at my doorstep in 2 days. Replaced old gas safety valve. Oven works great again.
Read more
More
$273.95
- Compare At:
-
$328.74
- You Save:
-
$54.79