Whirlpool Trim

Color: Black

The Door Trim is an OEM replacement part for Whirlpool ranges. It covers the outer edge of the oven door, protecting it from wear and dust while retaining heat and improving aesthetics. 

Causes of a bad door trim include normal wear and tear over time from repeated door openings and closings, exposure to heat and steam from cooking, or accidental damage. The high-temperature paint coating can peel or bubble and the rigid trim material may crack or warp.

Symptoms of a bad door trim include:

• Peeling, bubbling, or cracked paint
• Warped or misshapen trim 
• Gaps appearing around the door seal
• Increased heat loss from the oven cavity
• Declining aesthetic appeal

Color: Black - Right Hand Trim. For the Left Hand use W10761018

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Oven Door Trim Kit is an OEM replacement part for Whirlpool ranges.

Causes of faulty trim pieces involve normal wear from opening and closing the oven door hundreds of times over the years. Exposure to high heat cycles can dull finishes or cause cracking in lower-quality materials.

Symptoms of inadequate trim include:

• Loose, wobbly or missing door handles
• Gaps appearing around door perimeter
• Scratches or deterioration on visible surfaces
• Broken trim detracting from clean aesthetic

Color: White. For black order 8184858. For bisque order 8184860. The kit includes two side pieces and one bottom piece.

NOTE: This part has been redesigned by the manufacturer. The lower screws are no longer used and the side trim now locks into the lower trim with the dimples on the lower end of the side trim.

This OEM Whirlpool replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana and Magic Chef ranges.

The Oven Door Trim Kit is an OEM part for Whirlpool ranges. This kit includes trim pieces that frame the oven door, providing a finished look and helping to seal the door properly.

Causes of a bad oven door trim can include wear and tear from regular use, exposure to high temperatures, or physical damage from impacts or mishandling.

Symptoms of a bad oven door trim include:

• Visible cracks or damage to the trim
• The oven door not sealing properly
• Heat escaping from around the oven door
• The trim becoming loose or detaching

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This left-hand side trim finishes and protects the edge of the appliance's panel or housing, restoring a clean, factory look. Replace when the original trim is cracked, missing, or loose to keep panels aligned and edges covered.

• Provides a finished edge on the left side and improves overall appearance
• Helps cover gaps and protect edges from snags or chipping
• Aids proper alignment of adjacent panels or consoles
• Replace if cracked, warped, loose, or missing
• Common symptoms: visible gap on the left side, rattling/loose panel, sharp or broken edge, cosmetic damage

• Disconnect power before servicing; also shut off gas supply
• Wear cut-resistant gloves; edges and surrounding panels can be sharp
• Left/right orientation is determined when facing the front of the appliance
• Align the trim and secure with existing hardware; do not overtighten fasteners

Color: Biscuit. One trim piece per package. For black use WP98010187. For white use WP98010185.

A replacement trim piece for the breaker area that restores a finished look and helps shield the breaker opening. Use this trim to replace cracked, warped, or missing pieces and improve appliance appearance and safety. What it does:

• Covers the breaker opening and finishes the appliance exterior.
• Replaces damaged, cracked, or missing trim that leaves internal components exposed.
• Helps reduce dirt entry and accidental contact with the breaker area.
• Restores a neat, factory appearance to the appliance.

• Disconnect power at the home's breaker panel before servicing the appliance.
• Installation typically requires basic hand tools; follow the OEM service manual for exact steps.
• Handle edges carefully; damaged trim can have sharp edges.

This door shelf trim (retainer bar) snaps across the front of a refrigerator door bin to keep bottles and condiments secure. Replace a cracked or missing rail to restore safe storage and prevent items from falling when the door opens.

• Secures items on the door shelf/bin and helps prevent spills during normal use
• Replaces broken, cracked, warped, or missing trim that won't stay attached
• Helps the door close without interference from loose items
• Typical symptoms: items fall from the door bin; rail is loose, damaged, or missing

• Empty the door bin before servicing
• Release the old trim by disengaging the end tabs or clips; pull outward to remove
• Align the new trim with the bin slots and snap both ends in evenly—do not overflex
• Inspect the door bin for cracks or worn slots that could prevent a secure fit

This door trim is the exterior finish piece that restores a clean, finished look to a refrigerator door and protects the door edge from chips and wear. Ideal for replacing cracked, dented, or missing trim to improve appearance. What it does:

• Covers and protects the outer edge of the refrigerator door for a finished cosmetic appearance
• Replaces damaged or missing trim that can make the door look worn or allow edge damage to spread
• Helps maintain proper fit of adjacent components by restoring the door's exterior profile
• Common symptom: visible cracks, dents, broken mounting tabs, or missing trim panels

• Disconnect power and empty door area before starting; follow appliance safety practices
• Minor disassembly (remove door handle or inner door panel) may be required—use basic hand tools
• Align trim carefully to avoid cracking mounting tabs; do not force into place
• If mounting hardware or adjacent parts are damaged, replace them as needed for a secure fit

This replacement trim restores the finished edge and appearance around the appliance door, helping keep the door seal covered and giving a clean, factory look. It's a direct-fit exterior trim piece used where the original is cracked, dented, or missing. What it does:

• Covers and protects the outer edge of the appliance door for a finished appearance
• Helps conceal fasteners and the gap between the door and cabinet
• Returns the door to factory aesthetics after impact or wear
• Commonly replaced when trim is cracked, bent, or cosmetic finish is damaged

• Disconnect power to the appliance before starting any work
• Handle trim carefully to avoid scratching the finish or cutting on sharp edges
• Align tabs and slots, then secure with the original fasteners; do not overtighten
• If the trim includes adhesive or clips, follow OEM instructions for proper seating

This shelf trim is the molded edge piece that finishes and protects the front edge of a refrigerator shelf, restoring a clean look and helping keep items from sliding off the shelf. What it does

• Replaces damaged, cracked, or missing shelf edge trim to restore a smooth, finished shelf front
• Helps keep glass or plastic shelves seated and reduces front-edge rattling or shifting
• Improves appearance by covering rough or chipped shelf edges
• Compatible with standard refrigerator glass/plastic shelves that use snap-on edge trim

• Remove food and slide the shelf out before attempting replacement
• Trim usually snaps onto the shelf edge; align and press firmly along the length until fully seated
• No specialized tools typically required; use a plastic trim tool to avoid scratching if needed
• Replace the shelf itself before installing trim

This replacement trim pan restores the finished edge around the appliance cabinet and helps keep the interior sealed and looking neat. It replaces a worn, cracked or missing trim to improve appearance and help maintain proper airflow. What it does:

• Covers and protects the cabinet edge where panels meet, restoring a clean trim line
• Helps maintain the intended cabinet seal and airflow path by replacing damaged trim
• Reduces gaps that can collect dirt, moisture, or debris around the cabinet perimeter
• Improves overall appearance when original trim is cracked, warped or missing

• One trim pan

• Disconnect power to the appliance before starting any repair
• Remove any nearby shelves, drawers or access panels as needed for clearance
• Typically secures with clips or screws; use appropriate screwdriver or trim tool and avoid forcing plastic tabs

The Trim is an OEM component specifically designed for Whirlpool refrigerators. Installed along the outer edge of the refrigerator and freezer doors, the trim seamlessly frames the opening. Its styled accents and durable material withstand frequent use while enhancing the appliance's appearance.

Symptoms of bad trim can include cracks or chips developing from years of opening and closing the doors. Adhesive degradation may cause a loose, uneven fit.

Causes involve normal wear over time exposing the trim to repeated stresses. Impact damage could also compromise its structure.

Symptoms of a bad trim include:

• Gaps allowing air exchange reducing efficiency  
• Loose, flapping, or misaligned sections ruining aesthetics
• Cracks or splits compromising the weatherproof barrier

This OEM Whirlpool part is also compatible with KitchenAid, Maytag, Jenn-Air, Amana, and some Kenmore refrigerator models. Replace to restore an integral design element protecting the door seals.