Whirlpool Trim

Color: Bisque. For black order 8184858. For white order 8184859. Kit includes two side pieces and one bottom piece. NOTE: This part has been redesigned by the manufacturer. The lower screws are no longer used and the side trim now locks into the lower trim with the dimples on the lower end of the side trim.

The side trim is a finishing piece that covers the appliance's right edge. Replacing a damaged or missing trim restores the factory look and helps keep adjacent panels aligned for proper fit.

• Finishes and protects the right-side edge of the unit for a clean appearance
• Helps align and secure adjoining panels or console components
• Reduces unsightly gaps that can collect debris
• Common symptoms: cracked, chipped, warped, loose, or missing trim; rattling or poor panel alignment

• Disconnect power to the appliance before service; allow hot surfaces to cool
• Wear cut-resistant gloves—edges and surrounding panels can be sharp
• Note right-hand orientation; transfer any clips/brackets from the old trim if present
• Align tabs and fasteners carefully; tighten hardware just snug to avoid distortion

Replacement trim pan that restores the finished look around your range or oven opening and helps keep spills and debris away from internal components. Designed to match OEM fit and function for a clean, safe cooktop area. What it does:

• Covers and protects the area beneath the cooktop or control bezel to prevent spills from entering internal cavities.
• Restores a flush, finished appearance if original trim is dented, bent, or missing.
• Helps reduce grease and food buildup that can lead to odors or harder cleaning.
• Stops rattling or gaps caused by damaged or warped trim pieces.

• Disconnect power to the appliance before starting any work; allow surfaces to cool.
• Handle edges carefully — trim pieces can have sharp edges after removal.
• Reference your model's service manual or OEM installation instructions for step-by-step guidance.

This door shelf trim (retainer bar) snaps across the front of a refrigerator door bin to keep bottles and condiments secure. Replace a cracked or missing rail to restore safe storage and prevent items from falling when the door opens.

• Secures items on the door shelf/bin and helps prevent spills during normal use
• Replaces broken, cracked, warped, or missing trim that won't stay attached
• Helps the door close without interference from loose items
• Typical symptoms: items fall from the door bin; rail is loose, damaged, or missing

• Empty the door bin before servicing
• Release the old trim by disengaging the end tabs or clips; pull outward to remove
• Align the new trim with the bin slots and snap both ends in evenly—do not overflex
• Inspect the door bin for cracks or worn slots that could prevent a secure fit

This oven vent directs hot air out of the oven cavity and helps maintain proper internal temperature and airflow. It replaces a damaged or warped vent to restore venting performance and oven appearance. What it does:

• Channels heat and steam out of the oven cavity to support even cooking
• Helps prevent heat buildup behind the oven and adjacent cabinetry
• Replaces cracked, bent or discolored vent trim that can affect airflow or appearance
• Compatible with factory vent locations — installs where the original vent was mounted

• Designed for rear/top vent mounting; verify orientation matches your appliance before installing
• Disconnect power to the appliance before beginning any service to avoid shock or injury
• Handle edges carefully; use appropriate tools to remove mounting screws and clips
• If vent damage is extensive or other components are affected, inspect surrounding parts and wiring

This fill kit supplies the water fill tube used to deliver water to the refrigerator ice maker so it can fill and produce ice reliably. It replaces a damaged or cracked fill tube to help restore proper ice production. What it does:

• Routes water from the household supply to the ice maker's fill cup
• Replaces cracked, split or frozen fill tubes that cause reduced or no ice production
• Helps stop leaks caused by a damaged fill tube
• Works with the ice maker's fill mechanism to restore normal fill cycles

• Shut off the refrigerator power and water supply before starting
• Inspect related water lines and connections; replace any damaged clamps or tubing
• Use basic hand tools; avoid overtightening fittings to prevent cracks

This door trim is the exterior finish piece that restores a clean, finished look to a refrigerator door and protects the door edge from chips and wear. Ideal for replacing cracked, dented, or missing trim to improve appearance. What it does:

• Covers and protects the outer edge of the refrigerator door for a finished cosmetic appearance
• Replaces damaged or missing trim that can make the door look worn or allow edge damage to spread
• Helps maintain proper fit of adjacent components by restoring the door's exterior profile
• Common symptom: visible cracks, dents, broken mounting tabs, or missing trim panels

• Disconnect power and empty door area before starting; follow appliance safety practices
• Minor disassembly (remove door handle or inner door panel) may be required—use basic hand tools
• Align trim carefully to avoid cracking mounting tabs; do not force into place
• If mounting hardware or adjacent parts are damaged, replace them as needed for a secure fit

Right hand side. For the left side order 814374.

Color: Black. For white use 3374712. For almond use 3374713