Whirlpool Tube Or Fitting

This gas tubing is the direct-fit replacement part that routes natural or liquid propane gas between range components, restoring safe fuel flow for proper burner operation. It replaces worn or damaged tubing without modifying factory connections. What it does:

• Carries gas from the valve to burners or manifold to enable ignition and normal burner flames
• Commonly replaced when tubing is corroded, cracked, kinked or leaking
• Can stop symptoms such as persistent gas smell, burner failure to light, or intermittent flame
• Matches OEM fit and connection locations for a straightforward swap

• One gas tubing

• Shut off the gas supply and disconnect power before starting any work
• Only install on compatible appliances; use approved fittings and follow torque specs from the appliance manufacturer
• Check all connections for leaks after installation using a soapy-water solution or approved gas leak detector

This broil burner tubing routes gas/heat to the oven's broil element for consistent broiling performance. It replaces damaged or rusted tubing to restore proper broil operation and help maintain safe oven function. What it does:

• Channels the broil burner flame/heat toward the oven cavity for even broiling
• Replaces corroded, cracked, or bent tubing that can disrupt broil performance
• Helps prevent gas leaks and improper flame spread when installed correctly
• Works with the oven's broil assembly to maintain intended cooking results

• One broil burner tubing (single piece as pictured)

• Disconnect power and shut off gas supply before servicing; follow all safety procedures
• Inspect surrounding fittings, brackets, and gaskets and replace if worn to ensure a proper seal
• Tighten connections to manufacturer torque/spec recommendations and check for leaks after installation

This gas tubing is the OEM replacement tube that routes fuel between valves and burners for safe, reliable operation. It restores proper gas flow and helps prevent leaks when the original tube is damaged or corroded. What it does:

• Reconnects gas supply between the range/oven valve and burner manifold or orifice—maintains designed fuel path
• Enables steady gas flow for consistent burner ignition and heat
• Replaces cracked, pinched, bent, or corroded tubing that can cause weak flames or intermittent burner operation
• Helps reduce risk of gas leaks when installed and sealed correctly

• One gas tubing connector as shown

• Only install with the appliance disconnected from gas and power; confirm gas is shut off before starting
• Use proper fittings and thread sealant rated for gas connections; tighten to OEM torque to avoid leaks
• After installation, test all joints with a gas leak detector or soapy water and verify correct burner operation

This gas tubing is a direct-replacement supply tube used in compatible gas ranges and ovens to route fuel safely between the valve and internal components. It restores a secure, leak-free gas path so the appliance can operate correctly. What it does:

• Provides a sealed pathway for natural gas or LP from the appliance valve to burner or manifold connections
• Replaces corroded, damaged, or cracked tubing that can cause leaks or poor burner performance
• Helps prevent gas odors and suspected leaks when installed correctly
• Restores original routing and connection points for proper appliance function

• One gas tubing assembly

• Always shut off the gas supply and disconnect power before servicing; check for leaks with a soapy-water test or approved leak detector
• Use only the correct fittings, gaskets, and torque settings; never modify the tubing or connectors

This gas tubing connects the appliance gas supply to internal valves and burners, restoring a proper fuel path for safe operation. It replaces damaged or corroded tubing to help stop leaks and restore consistent burner performance. What it does

• Carries gas from the supply or manifold to the range/oven valve or burners
• Replaces cracked, corroded or kinked tubing that can cause gas leaks
• Can resolve symptoms such as burners that won't light or flames that are weak or uneven
• Helps restore a sealed fuel connection when installed correctly

• Turn off the gas supply and electrical power before servicing; follow local codes
• Use correct fittings and avoid kinks; tighten connections to manufacturer torque specs
• After installation, check all connections for leaks with an approved leak-test method (soapy water or gas detector) and test appliance operation

3/8 to 9/16

This 1/2" female adapter is a threaded plumbing connector that lets a 1/2" male water line or fitting join the appliance inlet safely and securely. It provides a simple, durable connection to restore proper water flow. What it does:

• Adapts a 1/2" male threaded water supply to the appliance's inlet fitting
• Restores a secure, leak-free connection when the original fitting is damaged or missing
• Commonly used where a reliable, compact threaded coupling is needed
• Can help stop drips or leaks caused by worn or corroded connectors

• One 1/2" female adapter

• Turn off the water supply and unplug the appliance before installing
• Use plumber's tape on threads for a reliable seal unless the OEM instructions specify otherwise
• Hand-start threads to avoid cross-threading, then tighten with an appropriate wrench; avoid over-tightening
• Check connections for leaks after restoring water and operation