White Outdoor Parts

This part is a replacement mandrel bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken mandrel bearing in a variety of lawn tractor models. Mandrel bearings are a critical component that ensures no excess heat, friction, or vibration occurs while the equipment is in use. Bearings are subject to wear and tear and will require replacement when no longer working effectively. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this mandrel bearing, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this mandrel bearing is suitable for use on lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

A blade is the part of chippers and shredders that cuts the grass. It spins rapidly and pulls the grass up before cutting it. The grass is sucked into the deck, where the clippings continue to get chopped into smaller pieces before getting expelled. With regular use of the blade, after accidental damage, or because of the age of the machine, the blade may cease to perform adequately. Running the lawn equipment over rocks or other solid obstacles may also cause the blade to break. In any case, the blade has to be removed, and a new blade should be installed. Wear gloves for protection and handle the blade with caution. Make sure the machine is cooled entirely before beginning the repair.This blade is a genuine OEM part sourced directly from the manufacturer. It is made of durable, high-quality metal. The blade is sold as an individual unit. The replacement part is compatible with MTD, Troy-Bilt, Yard Machines, and Huskee brand lawn and garden machines, including chippers and shredders.

This air cleaner housing is used to contain the air filter of a number of small gasoline powered engines. It attaches to the carburetor, holding the air filter in place to prevent particulates from entering the air/fuel mix of the engine. This housing is used on equipment such as walk-behind lawn mowers, log splitters, and other small engines uses. It's fairly rare for the air filter housing to fail. Rather, it's much more likely that the housing will suffer damage from banging against other equipment and obstacles. Additionally, when regularly replacing the air filter, it's a good idea to examine the filter housing for any damage or fitting problems. If the housing is not snug and airtight, dust, grass pieces, and other particulate can enter the carburetor and cause more significant damage. The air cleaner housing is easily accessible and can be removed and replaced. First remove the cover, the filter and prefilter, if present, exposing the bolts that hold the housing to the carburetor. Simply remove the bolts, remove the old housing, and replace it. Reverse the disassembly process, making sure to install a new filter. This housing, which is an OEM genuine replacement part, is compatible with Troy-Bilt, MTD, Cub Cadet, Yard Machines, Bolens, MTD, and Huskee equipment.

This oil filter is a genuine MTD part, sold individually. This oil filter can be used as a replacement part or a lawn tractor. The purpose of the oil filter is to provide a passageway through which the oil can be passed so any external materials, such as dirt, debris, and pebbles, can be eliminated from the oil to avoid causing damage to the internal infrastructure of the appliance.If the oil filter is punctured, torn, ripped, scraped, or eroded to the point that external materials can easily pass through it, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This oil filter is compatible with the following outdoor appliance brands: MTD, Kohler, Troy-Bilt, and Craftsman.

This left-hand inner tines assembly sit next to the outer tines on the left side of tillers from a variety of major manufacturers. The tines are the part of the equipment that breaks up the soil to create a garden and allow cultivation. The part is made of strong metal, but over time it can start to wear down or break when running over large rocks or other items.If the tines are broken or have been worn down, they will need to be replaced. Tines that are worn will not dig into the earth as well as new tines. A hammer and a set of pliers are required to make the replacement. Remove the tines from the tiller after turning it off and taking out the spark plug wire. The new tines can be installed in the same place.These inner tines are made to be used with tillers created by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Cub Cadet, and Craftsman. It is sold as an individual part. This is a genuine OEM replacement part that is sourced directly from the manufacturer.