White Outdoor Parts

This depth bar is a genuine MTD part, sold individually. This depth bar can be used as a replacement part for a tiller. The purpose of the depth bar for a tiller is to affix to the back of the appliance and slow down the rotation of the appliance so it can bore deeper into the ground.The depth bar of a tiller might have to be replaced at some point if it shows clear signs of damage upon a visual inspection. Damage could result from general wear and tear with long-term use or from a direct impact with a hard object such as a rock or a curb, warping the component beyond functionality. If this occurs, the depth bar should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This depth bar is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Yard Man, MasterCut, Huskee, and Montgomery Wards.

This blade retainer kit is designed for use with string trimmers and edgers by many manufacturers. It comes with a metal retaining washer that is used with the blade, as well as the needed spool cutting heads. This kit also includes the nut needed to fasten the blade to the gearcase. It is used to install a blade onto the trimmer while adding stabilization through the nut. The parts in the blade retainer kit can become worn out during use and may need to be replaced.When the blade needs to be replaced or a part of the blade retainer kit is broken, removing the parts is required. Moving the blade involves turning the retaining bolt while the equipment is on a level surface. Next, undo the bolt holding the blade so it can be removed. The blade can be replaced at this time, as well as the parts from this blade retainer kit.This blade retainer kit is made for edgers and string trimmers manufactured by Yard-Man, Craftsman, Bolens, Ryobi, MTD, Troy-Bilt, and Yard Machines. It is a single retainer kit that comes as a genuine OEM replacement part sourced directly from the manufacturer.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This throttle trigger spring is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. This throttle trigger spring is designed for use with edgers or trimmers. It is compatible with products from brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.The throttle trigger spring part is crucial to the proper functioning of the throttle. The purpose of the throttle trigger spring is to help the throttle trigger to retract. The replacement or repair process of the throttle trigger spring should be straightforward, but a screwdriver and pliers will be necessary to complete the replacement. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This throttle trigger spring is made out of metal.

This clevis pin is a metal fastener without threads like most screws. It has similarities to a bolt and is often inserted into a pre-drilled hole to secure two or several items together in yard and garden equipment. Clevis pins will have a hold through the end where cotter pins can be attached to secure the pins into place. Sometimes these pins can become corroded or experience damage which will require them to be replaced.If the clevis pin is falling out, broken, or damaged, it needs to be removed. Spraying it with penetrating oil and letting it sit for a few hours before pulling the cotter pin away from the clevis pin is the best technique. A pry bar can be used to take the pressure away from the clevis pin before hammering against the clevis pin to take it out. At that point, the new clevis pin can be installed.Created for use in chainsaws, lawnmowers, and snowblowers, this clevis pin fits lawn and garden equipment by MasterCut, Craftsman, Yard-Man, Toro, Yard Machines, Cub Cadet, MTD, and Murray. This is a genuine OEM product directly sourced from the manufacturer that comes as an individual component.

This center hex nut is a genuine MTD part, sold individually. This center hex nut can be used as a replacement part in lawn mowers, snowblowers, tillers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of the center hex nut for one of these small engine outdoor appliances is to work in conjunction with a bolt to provide a fastening component for one or more parts within the internal mechanisms of the appliance.The center hex nut might need to be replaced if the small fastening component is lost, misplaced, or damaged within the typical lifespan of the small engine outdoor appliance in which it has been installed.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This center hex nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, Huskee, Montgomery Wards, Yard Man, and MasterCut.

The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.

This is an internal snap ring that can be found in many types of lawn and garden equipment. It is located between the spacer and bearing and is made of durable metal. The ring holds items steady and has an exposed area that functions like a shoulder to keep the assembly in place. Over time, the internal snap ring can become damaged through wear and tear or corrosion. It can also break and will no longer operate the way it should.If the internal snap ring is broken, corroded, or damaged, it will need to be replaced. Make sure the equipment is turned off and placed on a flat surface for the replacement process. A pair of snap ring pliers will be needed to remove the original internal snap ring. There is a plastic wheel cap located on top of the snap ring that needs to be removed first.This internal snap ring is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The snap ring is compatible with lawnmowers, chainsaws, and snowblowers manufactured by Yard-Man, Montgomery Wards, Huskee, MTD, Yard Machines, Troy-Bilt, and Cub Cadet.

This control valve is a genuine MTD part, sold individually. This control valve can be used as a replacement part for a log splitter or a wood chipper. The purpose of the control valve for a log splitter or a wood chipper is to facilitate and regulate the motion of the cylinder head.The control valve might eventually have to be replaced at some point within the standard lifespan of the equipment if the component is not functioning as it usually does. This could occur if the control valve has suffered damage that has rendered it broken, malfunctioning, or in some state of disrepair. If this is not able to be fixed by basic repair, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This control valve is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Yard Man, Bolens, Ryobi, Craftsman, Yard Machines, and MasterCut.

This is a ball joint assembly that is used in many snowblowers and lawnmowers. The ball joint is an important component of the equipment's steering system and helps secure drag links and tie rod ends. The ball joint assembly is made of durable metal but can experience wear and tear. It should be inspected regularly for damage or signs of wear and tear. If the ball joint assembly is broken, damaged, or bent, it will need to be replaced.If the ball joint assembly is damaged or detaches from the gear shift, a replacement is needed. An adjustment wrench can be used to make the replacement. First, make sure the equipment has been turned off. Remove the spark plug wire while doing the replacement. The ball joint can be removed using the wrench after removing any screws required to access it. Install the new ball joint assembly in its place.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The ball joint assembly is designed to be compatible with lawnmowers and snowblowers manufactured by Cub Cadet, Craftsman, and MTD.

This is a ball and joint assembly replacement for use with several types of lawn and garden equipment, including lawn tractors. The ball and joint assembly is an important part of the steering system in the machine. It helps to secure tie rod ends and drag links. If there is damage to the ball and joint assembly, it can cause a range of problems with the steering. This can make it impossible to properly operate the machine. Damage to the assembly could occur for a range of reasons. In some cases, it could simply be years of wear and tear plus corrosion. Other times, it could be damage caused while operating the machine. Issues with the ball and joint assembly should be repaired right away. This is a genuine OEM replacement part that can work for many machines, such as lawn tractors, lawn mowers, and snowblowers. It is compatible with a range of brands including Yard-Man, Troy-Bilt, Yard Machines, Craftsman, Bolens, Murray, Cub Cadet, Toro, and MTD.

The ignition switch is the part of lawn and garden equipment that features an ignition to turn on and off with a switch. These are common on lawn tractors, as well as some lawn mowers, wood chippers, tillers, and log splitters. While these switches tend to be robust, they may eventually wear out. Some might have a mechanical failure after being used for years. Others might have electrical issues. Regardless of the reason for the failure, they will need to be replaced to continue using the machine. This is a genuine OEM part that is sold individually. It is a complete kit, which will include not only the switch, but also a washer and nut to secure the switch into the housing, and two ignition keys. The ignition switch can work with lawn tractors from brands such as MTD, Ryobi, Troy-Bilt, Bolens, Yard Machines, and Craftsman.