Yard Machines Cap, Lid & Cover

Protective shield that mounts over the edger blade to block flying debris and stones. Replace if cracked, broken, or missing for safe operation.

This part is a replacement push cap. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current push cap is broken or has been misplaced, this part can be used as a replacement. It is intended for use with several lawnmower models.The push cap is attached to the wheel hub cap and fits over the end of the axle shaft. This helps to protect the end of the shaft and the attached bolt that holds the wheel into position. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this push cap, the appropriate owner's manual and equipment diagrams should be referred to. This push cap is suitable for use on a variety of lawnmower models manufactured by MTD, Yard Machines, Craftsman, Yard Man, and Troy-Bilt. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

Threaded vented fuel cap for gas snowblowers. Replaces cracked, broken, or missing caps that cause fuel leaks or vapor lock. Installs on fuel tank.

Engine valve cover cap for outdoor power equipment. Replaces cracked, broken, or missing valve covers on small engines. Direct fit for blowers, tillers, and more.

A carbon canister filter cap is an essential piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, wood chippers, string trimmers, log splitters, and edgers. It is compatible with products by brands such as Craftsman, Cub Cadet, and MTD. This carbon canister filter cap is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. The purpose of the carbon canister filter cap is to prevent harmful fumes or chemicals from entering the environment.The replacement or repair process of the carbon canister filter cap should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Replacement fuel cap assembly for tillers and outdoor power equipment. Seals fuel tank, prevents debris entry, and features vent slots. Needed when original cap is cracked, broken, or gasket is worn.

Hopper collar that connects the hopper assembly to the impeller housing on chipper shredders. Replace if cracked, broken, or missing to protect components.

Protects the air filter on string trimmers from debris and weather exposure. Replace if cracked, broken, or missing to keep filter functioning properly.

This service kit includes components for the front axle assembly that steers the lawn tractor, located at the front of the machine beneath the engine. Replace if steering becomes difficult, the tractor pulls to one side, or you notice excessive play in the steering wheel.

This is a protective cover that fits over the wheel on a lawn vacuum or chipper/shredder. It helps prevent dust, debris, and grass clippings from accumulating around the wheel hub and axle. Replace this cover if it is cracked, broken, or missing, which can allow debris buildup that impedes wheel rotation.

This is a quality rear engine cover that is used on several types of string trimmers. The component is tightened onto the back of the trimer to offer protection and shielding to the engine. It is made of a durable material and comes with both the cover and four screws to attach it to a string trimmer. Over time, the rear engine cover can become damaged, broken, or lost and should be replaced to ensure the engine is protected.Check the rear engine cover for cracks and other damage before installing a new replacement part. First, remove the screws from the rear engine cover so it can be taken off of the string trimmer. An O-ring may be needed to create the proper clearance when installing the new rear engine cover. Make sure to properly tighten the screws on the cover before use.This rear engine cover is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The engine cover is designed to be compatible with string trimmers manufactured by Bolens, MTD, Yard Machines, Murray, and Craftsman.

Plastic safety switch cover for chipper shredders. Protects the switch during operation and storage. Replace if cracked, broken, or missing.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

Deck belt cover for lawn tractors. Shields the drive belt system on 42-inch mower decks. Replace if cracked, broken, or missing to protect belts.