Yard Machines Parts

Replace a worn worm gear if your tiller won't move forward or reverse smoothly. This 61-tooth gear meshes with the transmission drive system.

If your lawn tractor won't stop properly or brakes feel weak, this brake puck creates pressure on the brake disk when you push the pedal. Essential safety part.

Hydraulic pump coupler for log splitters. Connects the drive shaft to the hydraulic pump. Replace if cracked, stripped, or worn to restore proper operation.

A 12-volt bulb that provides forward lighting for the lawn tractor, mounted in the headlight housing. Replace when the light dims, flickers, or burns out completely.

Replace your snowblower's wheel assembly if the tire is worn, cracked, or damaged. Includes rubber tire and metal rim for proper support and mobility.

Auger bearing for snow throwers supports rotating shaft movement. Replace if you hear grinding noise or auger doesn't spin smoothly. Verify fit with model.

Mulching blade cuts grass into fine clippings for nutrient-rich lawns. Replace when dull or damaged for cleaner cuts. Verify fit with your model number.

21.23-inch mulching blade for 42-inch deck lawn tractors. Replace when blade edge is worn, bent, or cracked. Features 6-point star center hole.

Speed selector control cable connects the speed lever to the ground drive system on snowblowers. Replace if cable is frayed, broken, or kinked.

Forward control cable for rear-tine tillers. Connects the bail arm to the transmission for forward movement. Replace if cable is frayed, loose, or broken.

Seals the carburetor fuel bowl to maintain proper pressure and fuel delivery. Replace if you notice fuel leaks or engine performance issues.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

Carburetor assembly for snow throwers and small engines. Installs in the engine to mix air and fuel. Replace if cracked, clogged, or worn from use.

Replacement muffler for lawn tractors. Installs on the exhaust system to reduce engine noise. Order a new one if your original is rusted, cracked, or damaged.

Drive belt for lawn tractors and riding mowers. Replace if worn, cracked, or slipping during operation. Verify fit with your model number.

A V-belt is used on riding lawn mowers and yard tractors to turn the blades and the accessories of these power tools. The engine pulley, which supplies power, is connected to the cutting deck pulley, which turns the mower blades, with a V-belt. Over time the V-belt, which is made of rubber, may stretch, calling for the tension on the belt to be adjusted. Eventually the belt will wear to the point that it no longer turns the cutting deck pulley fast enough for the blades to cut grass. Sometimes the belt will crack with dry rot and break. In any of these instances, the solution is to replace the V-belt. In order to replace the V-belt, the cutting deck must be lowered completely. A worn belt will likely slip off the cutting pulley with little resistance. In case the belt is missing, the user will find a diagram with the proper V-belt routing on top of the cutting deck. When replacing the V-belt, make sure to use a genuine OEM replacement part such as this one, which is manufactured to be an exact replacement for the original. This V-belt is compatible with riding mowers from MTD, Murray, Huskee, Troy-Bilt, Yard Machines, and Yard Man.