Yard Machines Transmission, Brake & Clutch

This flexible coupling is a genuine MTD part, sold individually. This flexible coupling can be used as a replacement part for a log splitter or a chipper shredder. The purpose of the flexible coupling is to carry on the power transmission between multiple shafts. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This flexible coupling is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, and Yard Man.

If your snow blower won't move or gears slip, the transmission housing assembly may be damaged. This part houses critical drive components.

Auger stopped turning or snow discharge is weak? This auger gearbox assembly restores power transfer from engine to auger. Moderate DIY repair.

This gearbox assembly is a genuine MTD part, sold individually. This gearbox assembly can be used as a replacement part in a snowblower. The purpose of the gearbox assembly in a snowblower is to facilitate the rotation and function of the gears of the appliance.The gearbox assembly could become punctured, warped, dented, cracked, or eroded, and if this prevents the gearbox from serving its typical function, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This component is a genuine OEM replacement part sourced directly from the manufacturer. This gearbox assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Huskee, and Troy-Bilt.

Wheels won't self-propel but auger works? This transmission assembly restores drive power when belts and cables check out but output shaft isn't turning.

If your snow blower won't self-propel or drive forward, a worn friction wheel assembly is often the cause. This drive system transfers power to the wheels.

String keeps spinning at idle or engine overheats? A worn clutch assembly causes engagement issues. This centrifugal clutch repair restores normal operation.

Deck won't stop spinning after disengaging blades? This lawn tractor deck brake assembly stops mower deck rotation for safe operation and blade changes.

This governor arm assembly can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm assembly is a connecting part within the governor system; it contains the governor arm and the components that fasten the governor arm to the governor spring and the throttle linkage.Governor arms can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm can affect the functionality of the entire governor system, which could render equipment nonfunctional. If the governor arm or its fastener parts are damaged, a governor arm assembly should be ordered, and the damaged or broken parts should be removed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm assembly is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

Tractor won't move or drives when disengaged? The clutch assembly engages and disengages power from engine to wheels. Moderate DIY repair.

Tiller won't engage or gears grind? This clutch collar spaces beveled gears for smooth rotation and proper gear engagement. Common repair part.

Fix transmission engagement issues with this right actuating arm. Controls clutch and brake operation on lawn tractors. Direct-fit replacement part.

Fix tiller transmission issues with this 17-tooth spur gear. Restores power transfer when gears slip or grind. Fits most rear-tine tiller models.

Tiller not moving forward or reverse? A worn gear spur disrupts power transmission. This internal gear keeps your tiller's drive system working smoothly.

The gearbox assembly is found in tillers and is where the gears are housed that supply the drive and torque for the unit. The gearbox assembly is designed to provide protection for the gears and the other internal components, which are responsible for transferring energy to increase torque and control speed. Although it is made of durable materials, it may become worn or damaged over time and require a replacement. This genuine OEM gearbox assembly is produced to exact manufacturer standards and made to be used in compatible machines from Yard-Man, Ryobi, Yard Machines, Bolens, Cub Cadet, and MTD. The gearbox assembly is sold as an individual assembly and comes ready to install with the four screws required for installation. Be sure to wear gloves and disconnect the power from the tiller before performing any repairs. Allow the unit to cool completely and follow the diagram to ensure that the replacement part fits exactly. This assembly will require a screwdriver and wrench set to replace.

Fixes snow blower drive issues caused by worn or damaged adapter pulley. Restores proper belt tension and transmission engagement for smooth operation.